SLPOWER DPCI

CPCI Series / DPCI Series 200 Watts
CompactPCI® System Power Supplies
CPCI SERIES 200 Watts, Ac Input with PFC
DPCI SERIES 200 Watts, 48 Vdc Input
FEATURES:
INPUT FAULT
CPCI200
EXECUTIVE MEMBER
• 200 W in 3U x 8HP,
• Fully compliant with PICMG CompactPCI® specifications
• Current sharing and internal OR-ing diodes for N+1
redundancy
• High current 5 V and 3.3 V outputs
• CompactPCI® package requires only 15 cfm of external
cooling air
• Universal ac input versions with power factor correction
• 48 Vdc input versions
3U x 8 HP
CPQ400 (shown with optional interface board)
The CPCI series (ac input) and DPCI series (dc input) are highly reliable power supplies for CompactPCI systems, which are
increasingly used in communications, industrial, military/aerospace, and other applications. These power supplies offer high power
density in plug-in modules that meet the requirements of the PICMG® power interface specification for CompactPCI systems.
These units may be used as a single power supply for a CompactPCI system, or multiple units may be used in parallel for higher
power capability as needed. In addition, all units include current sharing, internal OR-ing diodes, and a hot plug input/output connector
to offer full hot swap capability and N+1 redundancy. Also, compatible ac and dc input units offer standardization on a single power
supply series for a system mechanical configuration.
The CPQ400 is a power supply assembly that is made up of two CPCI/DCPI 204s. Two supplies are enclosed with a fan to provide an
alternative mounting configuration to the Compact PCI format. This is used for maximizing the number of a customers revenue slots by
relocating the power supply while still keeping the CPCI/DCPI electrical characteristics. These supplies can be used in parallel to
provide 400 watts of output power or as a 200 watt N +1 redundant power supply system. An optional interface board brings the input
and output connectors to convenient screw terminals and Molex type connectors. The individual model ratings depend on the specific
units chosen and you should refer to the standard CPCI/DCPI data sheets. When used as a single 400 watt unit, you can simply
double the single unit specifications.
AC INPUT
Model
Power
Connector
Output 1
Output 2
CPCI-204-1203
200 W
47 Pin
5.0 V @ 25 A
3.3 V @ 30A
CPCI-204-1203 M
200 W
DIN "M'
5.0 V @ 25 A 3.3 V @ 25 A
CPCI SERIES SPECIFICATIONS
AC INPUT: 90-264 Vac continuous range, 47 to 63 Hz.
POWER FACTOR: 0.99 typical at full load.
Meets EN61000-3-2 Class A.
INRUSH:
CPCI : Cold start ac current is less than 27 A at 115 Vac, and 50
A at 230 Vac. Limited by thermistor.
BROWNOUT PROTECTION: Holds regulation to 85 Vac
(30 seconds maximum)
Output 3
Output 4
Min. Load
on V1*
Max. Output
From V1 & V2
12 V @ 5.5 A -12 V @ 0.5 A
3.0 A
35 A
12 V @ 5.5 A -12 V @ 0.5 A
3.0 A
35 A
HOLDUP TIME: 10 ms minimum after removal of power at full load.
EFFICIENCY: 70% typical.
EMI: CONDUCTED RFI
Meets FCC Part 15, Class A; EN55022 Class A.
FAIL# SIGNAL: TTL compatible signal. Signal goes low under
the following conditions: Outputs #1 or #2 fail; an overcurrent
condition on outputs #1, #2, or #3; an overtemperature shutdown;
an overvoltage shutdown; or an ac input failure (5 ms warning
before outputs shutdown).
DC INPUT
Model
Power
Connector
Output 2
Output 3
Output 4
Min. Load
on V1*
Max. Output
From V1 & V2
DPCI-204-1203
200 W
47 Pin
5 V @ 25 A 3.3 V @ 30 A
12 V @ 5.5 A
-12 V @ 0.5 A
3.0 A
35 A
DPCI-204-1203M
200 W
DIN "M"
5 V @ 25 A 3.3 V @ 25 A
12 V @ 5.5 A
-12 @ 0.5 A
3.0 A
35 A
DPCI SERIES SPECIFICATIONS
DC INPUT: 36-72 Vdc
EFFICIENCY: 75% typical
100
Output 1
FAIL# SIGNAL: TTL compatible signal. Signal goes low under
the following conditions: Any of 4 outputs fail; an overtemperature
shutdown; or an overvoltage shutdown.
Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
CPCI Series / DPCI Series 200 Watts
CompactPCI® System Power Supplies
Power Supply Pin Assignments
Model: CPCI-204-1203
Connector: Positronics PCI47M400A1
Mating Connector: PCIH47F300A1
Model: DPCI-204-1203
Connector: Positronics PCI47M400A1
Mating Connector: PCIH47F300A1
Pin No.
Designation
Pin No.
Designation
Pin No.
Designation
Pin No.
Designation
1
+5 V
25
Not Used
1
+5 V
25
Not Used
2
+5 V
26
Not Used
2
+5 V
26
Not Used
3
+5 V
27*
Enable
3
+5 V
27*
Enable
4
+5 V
28
Not Used
4
+5 V
28
Not Used
5
GND
29
Not Used
5
GND
29
Not Used
6
GND
30
+5 V Sense
6
GND
30
+5 V Sense
7
GND
31
Not Used
7
GND
31
Not Used
8
GND
32
Not Used
8
GND
32
Not Used
9
GND
33
+3.3 V Sense
9
GND
33
+3.3 V Sense
10
GND
34
Sense Return
10
GND
34
Sense Return
11
GND
35
Not Used
11
GND
35
Not Used
12
GND
36
+12 V Sense
12
GND
36
+12 V Sense
13
+3.3 V
37
Not Used
13
+3.3 V
37
Not Used
14
+3.3 V
38
DEG#
14
+3.3 V
38
DEG#
15
+3.3 V
39
Inhibit
15
+3.3 V
39
Inhibit
16
+3.3 V
40
Not Used
16
+3.3 V
40
Not Used
17
+3.3 V
41
Not Used
17
+3.3 V
41
Not Used
18
+3.3 V
42
Fail #
18
+3.3 V
42
Fail #
19
GND
43
Not Used
19
GND
43
Not Used
20
+12 V Output
44
Not Used
20
+12 V Output
44
Not Used
21
-12 V Output
45
Safety Ground
21
-12 V Output
45**
Safety Ground
22
GND
46
Ac Neutral
22
GND
46
-48 Vdc Input Return
23
Not Used
47
Ac Line
23
Not Used
47
-48 Vdc Input
24
GND
24
GND
Model: CPCI-204-1203M
Male Connector: DIN 41612 Type “M”
Mating Connector: ERNI #914374 or AMP#148370
Pin No.
Designation
Pin No.
A13
Not Used
B17
A14
Inhibit
B19
Model: DPCI-204-1203M
Male Connector: DIN 41612 Type “M”
Mating Connector: ERNI #914374 or AMP#148370
Pin No.
Designation
Pin No.
+3.3 V
A13
Not Used
B17
+3.3 V
+12 V Output
A14
Inhibit
B18
+3.3 V
Designation
Designation
A15
Not Used
B19
+12 V Output
A15
Not Used
B19
+12 V Output
A16
Sense Return
B20
-12 V Output
A16
Sense Return
B20
-12 V Output
A17
+5 V Sense
B22
+5 V
A17
+5 V Sense
B22
+5 V
A1 8
+3.3 V Sense
B25
GND
A18
+3.3 V Sense
B25
GND
A1 9
+12 V Output
B28
Not Used
A19
+12 V Output
B28
-48 Vdc Input Return
A20
-12 V Output
B31
Not Used
A20
-12 V Output
B31
-48 Vdc Input
Enable
B2
Ac Line
C13
Enable
B2
Not Used
C13
B5
Ac Neutral
C14
Deg#
B5
Not Used
C14
Deg#
B8
Not Used
C15
Fail #
B8
Not Used
C15
Fail #
B11
Chassis Ground
C16
+3.3 V
B11
Chassis Gnd
C16
+3.3 V
B13
+3.3 V
C17
+3.3 V
B13
+3.3 V
C17
+3.3 V
B14
+3.3 V
C18
+3.3 V
B14
+3.3 V
C18
+3.3 V
B15
+3.3 V
C19
+12 V Output
B15
+3.3 V
C19
+12 V Output
B1 6
+3.3 V
C20
-12 V Output
B16
+3.3 V
C20
-12 V Output
Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
101
CompactPCI® System Power Supplies
OUTPUT
ENVIRONMENTAL
LINE & LOAD REGULATION:
± 2% over input range and minimum to 100% load change.
RIPPLE & NOISE
1% p-p or 50 mV, whichever is greater.
Measured at mating connector with 20 µF
REMOTE SENSE
Open sense lead protection
TEMPERATURE COEFFICIENT
(Outputs #1 and 2): 0.03% per degree centigrade
COOLING
200 Watt:
15 cfm, 225 lfm airflow required for cooling.
OUTPUT ISOLATION
Isolated from ground 50 Vdc (leakage current <20 µA)
THERMAL PROTECTION
Shuts down power supply if overheated.
Automatic recovery.
STABILITY
0.1% over 8 hours after 30 minutes warm-up.
TEMPERATURE RANGE
0 to 40º centigrade at full ratings; derate 2.5%
per degree centigrade from 40º to 70º centigrade.
Unit will start up at -20º centigrade.
TRANSIENT RESPONSE
(Outputs #1 and 2): Output voltage returns to within 1% in less
than 1 ms for a 50% load change. Peak transient does not
exceed 5%.
MISCELLANEOUS
OVERVOLTAGE PROTECTION
(Outputs #1 and #2): Protects load against power supply
induced overvoltage. Trip-point is factory set so that
output voltage cannot exceed 136% of nominal. Input
power must be recycled to reset.
OVERLOAD PROTECTION
All outputs are protected against overload and short circuit,
Automatic recovery upon removal of fault.
DEG# SIGNAL :
TTL compatible signal. Signal goes low 20ºC before an
overtemperature shutdown.
FAIL LED :
Amber LED illuminates upon a failure condition as per the CPCI
and DPCI series specifications.
STATUS LED :
Green LED illuminates with no presence of any
failure condition.
REMOTE ENABLE
Contact closure to common turns on dc outputs.
Recessed pin for “make last, break first” connection.
REMOTE INHIBIT
Contact closure to the negative sense line or a TTL
level “0” turns off dc outputs.
SAFETY AGENCY APPROVALS
Models are approved to UL1950; CSA 22.2 #234;
IEC 950 and TUV EN60950, Class 1 SELV.,
CE 72/23/EEC/93/68EEC (low voltage directive).
GUARANTEED FOR 2 YEARS
Two year guarantee includes labor and parts.
Guarantee applies to operation at full published
specifications at the end of 2 years.
OPTIONS:
LOW LEAKAGE
(CPCI only)
“L” option: Leakage current less than 0.5 mA per unit. Will
require additional filtering for compliance to EMI specifications.
MECHANICAL DIMENSIONS
CPCI-204, & DPCI-204 Models:
3U x 8HP W, 160 mm board depth (see outline drawing).
Utilizes a 47 pin modular connector in accordance with PICMG®
Power Interface Specification 2.11.
CPCI-204M, and DPCI-204M Models:
3U x 8HP W, 160 mm board depth (see outline drawing). Utilizes
a DIN “M” connector as referenced in the PICMG® Power
Interface Specification 2.11.
REDUNDANCY
Built-in ORing diodes, slope program current sharing on all
outputs, and self aligning connector provide hot swap and N+1
capabilities. Current sharing remains within 10% of the unit’s full
output rating while units are in thermal equilibrium.
REVERSE VOLTAGE
Protected against reverse voltage up to supply
current rating. except for reverse voltage on output #4 on CPCI-200.
102
Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
CompactPCI® System Power Supplies
CPCI-204 & DPCI-204 Models:
:
3U x 8HP W, 160 mm board depth
Utilizes a 47 pin modular connector in accordance with PICMG®
Power Interface Specification 2.11.
MECHANICAL DIMENSIONS
CPCI-204M & DPCI-204M Models:
3U x 8HP W, 160 mm board depth
Utilizes a DIN “M” connector as referenced in the PICMG® Power
Interface Specification 2.11.
CPCI-204M, DPCI-204M
WEIGHT
1.58 LBS .72 KG
SIDE VIEW
FRONT VIEW
1.59
40.39
REAR VIEW
1.00
.80
1.37
.50
.12
.25
B2
B5
B11
FAULT
INPUT
CL
6.62
168.14
4.82
1.441
(36.61mm)
A13
C13
5.06
128.5
B22
B25
B28
B31
.12
3.930
99.82
PANEL FASTENER
M2.5 COLLAR
SCREW 4PL.
3U x 8HP
EMC FRONT PANEL
DIMENSIONS:
INCHES
MILLIMETERS
CPQ400 Model:
CPQ400 shown with optional interface board detached
Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
103