CompactPCI ® SYSTEM POWER SUPPLIES CPCI SERIES 150 to 350 Watts, Ac Input with PFC DCPI SERIES 150 to 350 Watts, 48 Vdc Input EXECUTIVE MEMBER FEATURES: • • • • • • • 150 W and 200 W in 3U x 8HP, 350 W in 6U x 8HP Fully compliant with PICMG CompactPCI® specifications Current sharing and internal OR-ing diodes for N+1 redundancy High current 5 V and 3.3 V outputs CompactPCI® package requires only 15 cfm of external cooling air Universal ac input versions with power factor correction 48 Vdc input versions The CPCI series (ac input) and DPCI series (dc input) are highly reliable power supplies for CompactPCI systems, which are increasingly used in communications, industrial, military/aerospace, and other applications. These power supplies offer high power density in plug-in modules that meet the requirements of the PICMG® power interface specification for CompactPCI systems. These units may be used as a single power supply for a CompactPCI system, or multiple units may be used in parallel for higher power capability as needed. In addition, all units include current sharing, internal OR-ing diodes, and a hot plug input/output connector to offer full hot swap capability and N+1 redundancy. Also, compatible ac and dc input units offer standardization on a single power supply series for a system mechanical configuration. 3U x 8 HP Connector 47 Pin Modular 6U x 8 HP Input Ac Dc DIN “M” Ac Dc Power Model No. Connector Input Power Model No. 150 W CPCI-154-1203 47 Pin Modular Ac 350 W CPCI-354T-1203 Dc 350 W DPCI-354T-1203 38 Pin Modular Ac 350 W CPCI-354-1203 Dc 350 W DPCI-354-1203 200 W CPCI-204-1203 150 W DPCI-154-1203 200 W DPCI-204-1203 150 W CPCI-154-1203M 200 W CPCI-204-1203M 150 W DPCI-154-1203M 200 W DPCI-204-1203M Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com CompactPCI ® SYSTEM POWER SUPPLIES CPCI SERIES 150 to 350 WATTS, AC INPUT WITH PFC, QUAD OUTPUT, HOT SWAP SPECIFICATIONS AC INPUT: 90-264 Vac continuous range, 47 to 63 Hz. POWER FACTOR: 0.99 typical at full load. Meets EN61000-3-2. INRUSH: CPCI-154, 204 MODELS: Cold start ac current is less than 15 A at 115 Vac, and 30 A at 230 Vac. Limited by thermistor. CPCI-354 MODELS: Cold start ac current is less than 30 A at 115 Vac, and 60 A at 230 Vac. Limited by thermistor. BROWNOUT PROTECTION: Holds regulation to 85 Vac (30 seconds maximum) HOLDUP TIME: 16 ms minimum after removal of power at full load. 10 ms minimum for CPCI 200s. EFFICIENCY: 70% typical. EMI: CONDUCTED RFI Meets FCC Part 15, Subpart J, class B; EN55022 class A; CISPR 22 class B. All 150 W and 200 W models class A FAIL# SIGNAL: TTL compatible signal. Signal goes low under the following conditions: CPCI-154 & CPCI-204 Models (all connector types): Outputs #1 or #2 fail; an overcurrent condition on outputs #1, #2, or #3; an overtemperature shutdown; an overvoltage shutdown; or an ac input failure (5ms warning before outputs shutdown). CPCI-354 & CPCI-354T Models: Any of 4 outputs fail; an overtemperature shutdown; an overvoltage shutdown; or an ac input failure (5ms warning before outputs shut down). AC INPUT Min. Load Maximum Output on V1* From V1 & V2 Model Power Output 1 Output 2 Output 3 Output 4 CPCI-154-1203 150 W 5.0 V @ 25A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A CPCI-154-1203M 150 W 5.0 V @ 25 A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A CPCI-204-1203 200 W 5.0 V @ 25 A 3.3V @ 30 A 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A 35 A CPCI-204-1203M 200 W 5.0 V @ 25 A 3.3 V @ 25 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 35 A CPCI-354-1203 350 W 5.0 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A CPCI-354T-1203 350 W 5.0 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A * For full output current capability on V2, V3, V4. DPCI SERIES 150 to 350 WATTS, QUAD OUTPUT, 48 VDC INPUT, HOT SWAP SPECIFICATIONS DC INPUT: 36-72 Vdc EFFICIENCY: 75% typical FAIL# SIGNAL: TTL compatible signal. Signal goes low under the following conditions: Any of 4 outputs fail; an overtemperature shutdown; or an overvoltage shutdown. 48 VDC INPUT Min. Load Maximum Output on V1* From V1 & V2 Model Power Output 1 Output 2 Output 3 Output 4 DPCI-154-1203 150 W 5 V @ 25 A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A DPCI-154-1203M 150 W 5 V @ 25 A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A DPCI-204-1203 200 W 5 V @ 25 A 3.3 V @ 30 A 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A 35 A DPCI-204-1203M 200 W 5 V @ 25 A 3.3 V @ 25 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 35 A DPCI-354-1203 350 W 5 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A DPCI-354T-1203 350 W 5 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A * For full output current capability on V2, V3, V4. Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com CompactPCI ® SYSTEM POWER SUPPLIES GENERAL SPECIFICATIONS OUTPUT ENVIRONMENTAL LINE & LOAD REGULATION: ± 2% over input range and 0 to 100% load change. COOLING 15 cfm, 400 lfm airflow required for cooling. RIPPLE & NOISE 1% p-p or 50 mV, whichever is greater. Measured at mating connector with 20 µF OUTPUT ISOLATION Isolated from ground 50 Vdc (leakage current <20 µA) THERMAL PROTECTION Shuts down power supply if overheated. Automatic recovery. REMOTE SENSE Open sense lead protection TEMPERATURE COEFFICIENT (Outputs #1 and 2): 0.03% per degree centigrade STABILITY 0.1% over 8 hours after 30 minutes warm-up. TRANSIENT RESPONSE (Outputs #1 and 2): Output voltage returns to within 1% in less than 1 ms for a 50% load change. Peak transient does not exceed 5%. OVERVOLTAGE PROTECTION (Outputs #1 and #2): Protects load against power supply induced overvoltage. Trip-point is factory set so that output voltage cannot exceed 136% of nominal. Input power must be recycled to reset. OVERLOAD PROTECTION All outputs are protected against overload and short circuit, Automatic recovery upon removal of fault. DEG# SIGNAL : TTL compatible signal. Signal goes low 20ºC before an overtemperature shutdown. FAIL LED : Amber LED illuminates upon a failure condition as per the CPCI and DPCI series specifications. TEMPERATURE RANGE 0 to 40º centigrade at full ratings; derate 2.5% per degree centigrade from 40º to 70º centigrade. Unit will start up at -20º centigrade. MISCELLANEOUS SAFETY AGENCY APPROVALS Models are approved to UL1950; CSA 22.2 #234; IEC 950 and TUV EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive). GUARANTEED FOR 2 YEARS Two year guarantee includes labor and parts. Guarantee applies to operation at full published specifications at the end of 2 years. OPTIONS LOW LEAKAGE (CPCI Models only) “L” option: Leakage current less than 0.5 mA per unit. Will require additional filtering for compliance to EMI specifications. STATUS LED : Green LED illuminates with no presence of any failure condition. MECHANICAL DIMENSIONS REMOTE ENABLE Contact closure to common turns on dc outputs. Recessed pin for “make last, break first” connection. CPCI-154, CPCI-204, DPCI-154 & DPCI-204 Models: 3U H x 8HP W, 160 mm board depth (see outline drawing). Utilizes a 47 pin modular connector in accordance with PICMG® Power Interface Specification 2.11. REMOTE INHIBIT Contact closure to the negative sense line or a TTL level “0” turns off dc outputs. REDUNDANCY Built-in ORing diodes, slope program current sharing on all outputs, and self aligning connector provide hot swap and N+1 capabilities. Current sharing remains within 10% of the unit’s full output rating while units are in thermal equilibrium. REVERSE VOLTAGE Protected against reverse voltage up to supply current rating. except for reverse voltage on output #4 on CPCI-200. CPCI-154M, CPCI-204M, DPCI-154M & DPCI-204M Models: 3U H x 8HP W, 160 mm board depth (see outline drawing). Utilizes a DIN “M” connector as referenced in the PICMG® Power Interface Specification 2.11. CPCI-354, DPCI-354 Models: 6U H x 8HP W, 160 mm board depth (see outline drawing). Utilizes a 38 pin modular connector as referenced in the PICMG® Power Interface Specification 2.11. CPCI-354T, DPCI-354T Models: 6U H x 8HP W, 160 mm board depth (see outline drawing). Utilizes a 47 pin modular connector in accordance with PICMG® Power Interface Specification 2.11. Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com CompactPCI ® SYSTEM POWER SUPPLIES POWER SUPPLY PIN ASSIGNMENTS Model: DPCI-354-1203 Connector: Positronics PCI38M400A1 Mating Connector: PCI38F300A1 Model: CPCI-354-1203 Connector: Positronics PCI38M400A1 Mating Connector: PCI38F300A1 Pin No. Designation Pin No. 1 +5 V 20 2 +5 V 21 3 +5 V 22* 4 +5 V 23 5 GND 24 6 GND 25* 7 GND 26 8 GND 27 9 GND 28* 10 GND 29 11 GND 30 12 GND 31 13 +3.3 V 32 14 +3.3 V 33 15 +3.3 V 34 16 +3.3 V 35 17 GND 36** 18 +12 V 37 19 Not Used 38 * Pins 22,25, and 28 are last mate, first break pins. ** Pin 36 is a first mate, last break pin. Designation Not Used -12 V GND GND +5 V Sense Enable Sense Return +3.3 V Sense Not Used DEG# +12 V Sense Inhibit Not Used Not Used Not Used Fail # Safety Ground Ac Neutral Ac Line Model: CPCI-354T-1203 CPCI-154-1203 CPCI-204-1203 Connector: Positronics PCI47M400A1 Mating Connector: PCI47F300A1 Pin No. Designation Pin No. 1 +5 V 25 2 +5 V 26 3 +5 V 27* 4 +5 V 28 5 GND 29 6 GND 30 7 GND 31 8 GND 32 9 GND 33 10 GND 34 11 GND 35 12 GND 36 13 +3.3 V 37 14 +3.3 V 38 15 +3.3 V 39 16 +3.3 V 40 17 +3.3 V 41 18 +3.3 V 42 19 GND 43 20 +12 V 44 21 -12 V 45** 22 GND 46 23 Not Used 47 24 GND * Pin 27 is a last mate, first break pin. ** Pin 45 is a first mate, last break pin. Model: DPCI-354T-1203 DPCI-154-1203 DPCI-204-1203 Connector: Positronics PCI47M400A1 Mating Connector: PCI47F300A1 Designation Not Used Not Used Enable Not Used Not Used +5 V Sense Not Used Not Used +3.3 V Sense Sense Return Not Used +12 V Sense Not Used DEG# Inhibit Not Used Not Used Fail # Not Used Not Used Safety Ground Ac Neutral Ac Line Model: CPCI-154-1203M CPCI-204-1203M Male Connector: DIN 41612 Type “M” Mating Connector: ERNI #914374 or AMP#148370 Pin No. A13 A14 A15 A16 A17 A18 A19 A20 B2 B5 B8 B11 B13 B14 B15 B16 Designation Not Used Inhibit Not Used Sense Return +5 V Sense +3.3 V Sense +12 V Output -12 V Output Ac Line Ac Neutral Not Used Chassis Ground +3.3 V +3.3 V +3.3 V +3.3 V Pin No. B17 B18 B19 B20 B22 B25 B28 B31 C13 C14 C15 C16 C17 C18 C19 C20 Pin No. Designation Pin No. Designation 1 +5 V 20 Not Used 2 +5 V 21 -12 V 3 +5 V 22* GND 4 +5 V 23 GND 5 GND 24 +5 V Sense 6 GND 25* Enable 7 GND 26 Sense Return 8 GND 27 +3.3 V Sense 9 GND 28* Not Used 10 GND 29 DEG# 11 GND 30 +12 V Sense 12 GND 31 Inhibit 13 +3.3 V 32 Not Used 14 +3.3 V 33 Not Used 15 +3.3 V 34 Not Used 16 +3.3 V 35 Fail # 17 GND 36** Safety Ground 18 +12 V 37 -48 Vdc Input Return 19 Not Used 38 -48 Vdc Input * Pins 22, 25, and 28 are last mate, first break pins. ** Pins 36 is a first mate, last break pin. Designation +3.3 V +3.3 V +12 V Output -12 V Output +5 V GND Not Used Not Used Enable DEG# Fail # +3.3 V +3.3 V +3.3 V +12 V Ouput -12 V Ouput Pin No. Designation Pin No. 1 +5 V 25 2 +5 V 26 3 +5 V 27* 4 +5 V 28 5 GND 29 6 GND 30 7 GND 31 8 GND 32 9 GND 33 10 GND 34 11 GND 35 12 GND 36 13 +3.3 V 37 14 +3.3 V 38 15 +3.3 V 39 16 +3.3 V 40 17 +3.3 V 41 18 +3.3 V 42 19 GND 43 20 +12 V Output 44 21 -12 V Output 45** 22 GND 46 23 Not Used 47 24 GND * Pin 27 is a last mate, first break pin. ** Pin 45 is a first mate, last break pin. Designation Not Used Not Used Enable Not Used Not Used +5 V Sense Not Used Not Used +3.3 V Sense Sense Return Not Used +12 V Sense Not Used DEG# Inhibit Not Used Not Used Fail # Not Used Not Used Safety Ground -48 Vdc Input Return -48 Vdc Input Model: DPCI-154-1203M DPCI-204-1203M Male Connector: DIN 41612 Type “M” Mating Connector: ERNI #914374 or AMP#148370 Pin No. A13 A14 A15 A16 A17 A18 A19 A20 B2 B5 B8 B11 B13 B14 B15 B16 Designation Not Used Inhibit Not Used Sense Return +5 V Sense +3.3 V Sense +12 V Output -12 V Output Not Used Not Used Not Used Chassis Ground +3.3 V +3.3 V +3.3 V +3.3 V Pin No. B17 B18 B19 B20 B22 B25 B28 B31 C13 C14 C15 C16 C17 C18 C19 C20 Designation +3.3 V +3.3 V +12 V Output -12 V Output +5 V GND -48 Vdc Input Return -48 Vdc Input Enable DEG# Fail # +3.3 V +3.3 V +3.3 V +12 V Output -12 V Output Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com CompactPCI ® SYSTEM POWER SUPPLIES MECHANICAL SPECIFICATIONS: 150-200 Watts 150-200 Watts Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com CompactPCI ® SYSTEM POWER SUPPLIES MECHANICAL SPECIFICATIONS: 350 Watts 350 Watts Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com 20K4/00