For more information, please visit the product page. rev. page 1 of 3 date 06/2008 DESCRIPTION: optical encoder PART NUMBER: NMC-XXX-2-XX-010-00 output waveform output signals current consumption frequency response supply voltage output current output voltage square wave A, B phase ≤ 40 mA ≤ 5 kHz 4.75 V ~ 5.25 V ≤ 1 mA VCC-1 V 0.5V max. 250, 500 1.3 μs typ. “H” “L”1 output resolution (ppr) waveform rise/fall time MECHANICAL SPECIFICATIONS 9.8N 9.8N 4.9 x 10-3 N·m max. 3 x 10-7 N·m max. 735 m/s2, 6 ms, 3 times each on XYZ 10 ~ 55 Hz, double amplitude 1.5mm 25g max. ENVIRONMENTAL SPECIFICATIONS 0° C to +60° C -20° C to +70° C RH 85% max., non-collecting nt operating temp storage temp humidity in u max shaft load, radial: axial: starting torque moment of inertia shock resistance vibration proof weight (without cable) ed ELECTRICAL SPECIFICATIONS NOTE: co 1. at maximum output current is ORDERING INSTRUCTIONS D NMC-XXX-2-XX-010-00 Resolution: 250 = 250PPR 500 = 500PPR Cable outlet: 1 = Rear 2 = Side Shaft type: 0 = Round D = D cut 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 For more information, please visit the product page. rev. page 2 of 3 date 06/2008 DESCRIPTION: optical encoder PART NUMBER: NMC-XXX-2-XX-010-00 ed ELECTRICAL CONNECTIONS D is co OUTPUT WAVEFORM nt in u CIRCUIT CONNECTIONS 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 PC FILE NAME: NMC COPYRIGHT 2008 BY CUI INC. 6.0 0.236 6.0 0.236 20.0 0.787 Cable Color Output Type 8.0 0.315 Power Blue REV. A 0V common Black Signal A Orange Signal B Yellow Scale 1:1 d e DESCRIPTION NEW DRAWING JMS DRAWN BY: NMC Manual Encoder PART NO. TITLE: APPROVED BY: UNITS: 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED u n it n o 17.5 0.689 25.5 1.004 c s i D 10.0 0.394 4.0 0.157 5.6 0.220 A 2:1 SCALE: MM [INCHES] REV: RoHS DATE 9/03/2007 For more information, please visit the product page.