For more information, please visit the product page. rev. page 1 of 3 date 03/2009 DESCRIPTION: dc-dc converter PART NUMBER: PK6 series on tin ue d features ·industry standard pin out ·wide 2:1 input range ·fully isolated ·low ripple & noise ·over-current protection ·HI-POT tested ·constant switching frequency ·high efficiency ·compact size 1.85”x1.1”x0.35” ·3 year warranty output power (max) input voltage output voltage output current (min) output current (max) PK6-D5-S3.3 PK6-D5-S5 PK6-D5-S12 PK6-D5-S15 PK6-D5-D12 PK6-D5-D15 PK6-D5-D512 PK6-D5-D515 PK6-D12-S3.3 PK6-D12-S5 PK6-D12-S12 PK6-D12-S15 PK6-D12-D12 PK6-D12-D15 PK6-D12-D512 PK6-D12-D515 PK6-D24-S3.3 PK6-D24-S5 PK6-D24-S12 PK6-D24-S15 PK6-D24-D12 PK6-D24-D15 PK6-D24-D512 PK6-D24-D515 PK6-D48-S3.3 PK6-D48-S5 PK6-D48-S12 PK6-D48-S15 PK6-D48-D12 PK6-D48-D15 PK6-D48-D512 PK6-D48-D515 3.3W 5.0W 5.4W 5.25W 5.52W 5.4W 5.56W 5.5W 4.0W 6.0W 6.0W 6.0W 6.0W 6.0W 5.56W 5.5W 4.0W 6.0W 6.0W 6.0W 6.0W 6.0W 5.56W 5.5W 4.0W 6.0W 6.0W 6.0W 6.0W 6.0W 5.56W 5.5W 4.5-7.2VDC 4.5-7.2VDC 4.5-7.2VDC 4.5-7.2VDC 4.5-7.2VDC 4.5-7.2VDC 4.5-7.2VDC 4.5-7.2VDC 8-16.5VDC 8-16.5VDC 8-16.5VDC 8-16.5VDC 8-16.5VDC 8-16.5VDC 8-16.5VDC 8-16.5VDC 18-32VDC 18-32VDC 18-32VDC 18-32VDC 18-32VDC 18-32VDC 18-32VDC 18-32VDC 32-63VDC 32-63VDC 32-63VDC 32-63VDC 32-63VDC 32-63VDC 32-63VDC 32-63VDC 3.3VDC 5VDC 12VDC 15VDC ±12VDC ±15VDC 5/12VDC 5/15VDC 3.3VDC 5VDC 12VDC 15VDC ±12VDC ±15VDC 5/12VDC 5/15VDC 3.3VDC 5VDC 12VDC 15VDC ±12VDC ±15VDC 5/12VDC 5/15VDC 3.3VDC 5VDC 12VDC 15VDC ±12VDC ±15VDC 5/12VDC 5/15VDC 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 1.0A 1.0A 0.45A 0.35A 0.23A 0.18A 0.8A/0.13A 0.8A/0.1A 1.2A 1.2A 0.5A 0.4A 0.25A 0.2A 0.8A/0.13A 0.8A/0.1A 1.2A 1.2A 0.5A 0.4A 0.25A 0.2A 0.8A/0.13A 0.8A/0.1A 1.2A 1.2A 0.5A 0.4A 0.25A 0.2A 0.8A/0.13A 0.8A/0.1A D is c model 1 number ripple & noise 2 mV P-P 50 50 120 150 120/120 150/150 75/120 75/150 50 50 120 150 120/120 150/150 75/120 75/150 50 50 120 150 120/120 150/150 75/120 75/150 50 50 120 150 120/120 150/150 75/120 75/150 NOTE: 1. All models (excluding the 5 V dc input, D5) are also available in an extended temperature range of -40°C~85°C. For these models, append “M” to the model number, e.g. PK6-D12-S3.3M. 2. Ripple & noise measured with a 20MHz bandwidth, off a 10uF electrolytic and a 0.1uF ceramic cap in parallel at the ouptut. 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 efficiency (typ.) 70% 70% 70% 70% 70% 70% 68% 68% 77% 77% 77% 77% 77% 77% 70% 70% 80% 80% 80% 80% 80% 80% 72% 72% 83% 83% 83% 83% 83% 83% 74% 74% For more information, please visit the product page. rev. page 2 of 3 date 03/2009 DESCRIPTION: DC/DC converter PART NUMBER: PK6 series INPUT conditions/description switching frequency constant OUTPUT parameter set point accuracy line regulation load regulation minimum load ripple and noise conditions/description all models single output models dual output models (10% min. load) nom 5 12 24 48 300 min -2% -0.5% -1.0% -2.5% 0.0 nom 20 MHz bandwidth PROTECTION parameter min 4.5 8 18 32 conditions/description min nom over-current continuous auto recovery 3 105% over-voltage internally zener clamped 3 110% NOTE: 3 continuous operation in a protected state may compromise long-term reliability. GENERAL conditions/description typical at full load input/case, input/output, output/case at 500 VDC approved to UL1950, EN60950, CISPR22, CE is c parameter efficiency dielectric withstand insulation resistance agency standards case material material flammability weight MTBF MIL-HDBK-217F operating temperature regular models extended temperature models storage temperature humidity operating (non-condensing) washability not intended for aqueous wash D max 7.2 16.5 32 63 units VDC VDC VDC VDC KHz on tin ue d parameter input voltage range min 68% 500 100M units 1.0% Vout Amps mVpp max units 135% 140% nom max 83% units VAC Ohms STS 94 V-0 22 (0.78) 740k -20 -40 -40 20% max +2% +0.5% +1.0% +2.5% grams (ounces) hours +71 °C +85 °C +105 °C 90% RH 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 For more information, please visit the product page. rev. page 3 of 3 date 03/2009 DESCRIPTION: DC/DC converter PART NUMBER: PK6 series DIMENSIONS (mm) Pin Assignments All dimensions are in inches (mm). Single Output CL 1 IN 0.6 (15.24) 3 0.2 (5.08) OUT 0.19 (4.68) 6 0.2 (5.08) 4. 5. 6. 7. +Vout N o p in Gnd Trim +Vout C om -Vout Trim Outside edge 0.3 (7.62) 7 0.19 (4.68) Label 1.6 (41.0) 2.2 (55.88) 0.2 (5.08) 7- CL 4 0.6 (15.24) 5 2 6 3 7 TOP VIEW D PIN CONNECTIONS Pin assignments Dual Output 1. +Vin 2. -Vin 1. +Vin 2. -Vin 3. +Vout 4. No pin 5. -Vout 3. 4. 5. 0.3 (7.62) 0.3 (7.62) 0.2 (5.08) 2.2 (55.88) Single Output 0.05(1.3) 1 0.2 (5.08) is c 0.18 (4.56) 4. 5. 6. 7. CL 0.3 (7.62) 0.37 (9.5) 0.04 (1.0) 1. +Vin 2. -Vin 3. CNT 2.0 (50.0) 4 5 2 1. +Vin 2. -Vin 3. CNT on tin ue d 2.56 (65.0) 0.2 (5.08) Dual Output +Vout Com -Vout 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382