RHRP1540, RHRP1560 Data Sheet January 2000 File Number 3685.2 15A, 400V - 600V Hyperfast Diodes Features The RHRP1540 and RHRP1560 are hyperfast diodes with soft recovery characteristics (trr < 35ns). They have half the recovery time of ultrafast diodes and are silicon nitride passivated ion-implanted epitaxial planar construction. • Hyperfast with Soft Recovery . . . . . . . . . . . . . . . . . . <35ns These devices are intended for use as freewheeling/ clamping diodes and rectifiers in a variety of switching power supplies and other power switching applications. Their low stored charge and hyperfast soft recovery minimize ringing and electrical noise in many power switching circuits reducing power loss in the switching transistors. • Avalanche Energy Rated • Reverse Voltage Up To . . . . . . . . . . . . . . . . . . . . . . . .600V • Planar Construction Applications • Switching Power Supplies • Power Switching Circuits Formerly developmental type TA49061. • General Purpose Ordering Information PART NUMBER • Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC PACKAGE BRAND RHRP1540 TO-220AC RHRP1540 RHRP1560 TO-220AC RHRP1560 Packaging NOTE: When ordering, use the entire part number. JEDEC TO-220AC ANODE CATHODE CATHODE (FLANGE) Symbol K A Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified RHRP1540 RHRP1560 UNITS Peak Repetitive Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM 400 600 V Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM 400 600 V DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VR 400 600 V Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV) (TC = 140oC) 15 15 A Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFRM (Square Wave, 20kHz) 30 30 A Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM (Halfwave, 1 Phase, 60Hz) 200 200 A Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PD 100 100 W Avalanche Energy (See Figures 10 and 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAVL 20 20 mJ Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TSTG, TJ -65 to 175 -65 to 175 oC 1 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2000 RHRP1540, RHRP1560 TC = 25oC, Unless Otherwise Specified Electrical Specifications RHRP1540 SYMBOL TEST CONDITION RHRP1560 MIN TYP MAX MIN TYP MAX UNITS IF = 15A - - 2.1 - - 2.1 V IF = 15A, TC = 150oC - - 1.7 - - 1.7 V VR = 400V - - 100 - - - µA VR = 600V - - - - - 100 µA VR = 400V, TC = 150oC - - 500 - - - µA VR = 600V, TC = 150oC - - - - - 500 µA IF = 1A, dIF/dt = 100A/µs - - 35 - - 35 ns IF = 15A, dIF/dt = 100A/µs - - 40 - - 40 ns ta IF = 15A, dIF/dt = 100A/µs - 20 - - 20 - ns tb IF = 15A, dIF/dt = 100A/µs - 15 - - 15 - ns QRR IF = 15A, dIF/dt = 100A/µs - 40 - - 40 - nC VR = 10V, IF = 0A - 60 - - 60 - pF 1.5 oC/W VF IR trr CJ RθJC - - 1.5 - - DEFINITIONS VF = Instantaneous forward voltage (pw = 300µs, D = 2%). IR = Instantaneous reverse current . trr = Reverse recovery time (See Figure 9), summation of ta + tb. ta = Time to reach peak reverse current (See Figure 9). tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 9). QRR = Reverse Recovery Change. CJ = Junction Capacitance. RθJC = Thermal resistance junction to case. pw = Pulse Width. D = Duty Cycle. Typical Performance Curves 1000 IR , REVERSE CURRENT (µA) IF, FORWARD CURRENT (A) 100 100oC 10 25oC 175oC 1 0.5 0 0.5 1.5 1 2 2.5 VF, FORWARD VOLTAGE (V) FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE 2 3 175oC 100 100oC 10 1 0.1 25oC 0.01 0 100 200 300 400 500 VR , REVERSE VOLTAGE (V) FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE 600 RHRP1540, RHRP1560 Typical Performance Curves (Continued) 50 100 40 t, RECOVERY TIMES (ns) t, RECOVERY TIMES (ns) TC = 25oC, dIF/dt = 100A/µs trr 30 ta 20 10 tb 0 0.5 5 1 10 TC = 100oC, dIF/dt = 100A/µs 80 trr 60 ta 40 tb 20 0 0.5 15 IF(AV) , AVERAGE FORWARD CURRENT (A) TC = 175oC, dIF/dt = 100A/µs t, RECOVERY TIMES (ns) 150 125 trr 100 75 tb 50 ta 1 5 15 10 15 DC 12 SQ. WAVE 9 6 3 0 100 115 IF, FORWARD CURRENT (A) FIGURE 5. trr, ta AND tb CURVES vs FORWARD CURRENT 160 130 145 TC , CASE TEMPERATURE (oC) FIGURE 6. CURRENT DERATING CURVE CJ , JUNCTION CAPACITANCE (pF) 175 150 125 100 75 50 25 0 0 50 100 150 200 VR , REVERSE VOLTAGE (V) FIGURE 7. JUNCTION CAPACITANCE vs REVERSE VOLTAGE 3 15 FIGURE 4. trr, ta AND tb CURVES vs FORWARD CURRENT 175 0 0.5 10 IF, FORWARD CURRENT (A) FIGURE 3. trr, ta AND tb CURVES vs FORWARD CURRENT 25 5 1 IF, FORWARD CURRENT (A) 175 RHRP1540, RHRP1560 Test Circuits and Waveforms VGE AMPLITUDE AND RG CONTROL dIF/dt t1 AND t2 CONTROL IF L DUT CURRENT SENSE RG IF + VGE - IGBT t1 VDD dIF trr dt ta tb 0 0.25 IRM t2 IRM FIGURE 8. trr TEST CIRCUIT FIGURE 9. trr WAVEFORMS AND DEFINITIONS IMAX = 1A L = 40mH R < 0.1Ω EAVL = 1/2LI2 [VR(AVL) /(VR(AVL) - VDD)] Q1 = IGBT (BVCES > DUT VR(AVL)) VAVL L CURRENT SENSE R + VDD IL IL I V Q1 VDD DUT t0 FIGURE 10. AVALANCHE ENERGY TEST CIRCUIT t1 t2 t FIGURE 11. AVALANCHE CURRENT AND VOLTAGE WAVEFORMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site www.intersil.com 4