RE U T A R E P M E T HIGH Document 932-1 Power Inductors – AGP2923 • AEC-Q200 Grade 1 qualified • Ideal for a variety of automotive applications • Designed for high temperature environments – up to 140°C ambient •Developed for high current power supply applications with high saturation current requirements •Four mounting pins for additional stability in high-vibration environments • Flat wire windings for extremely low DC and AC resistance • Vertical mounting provides a small footprint 2 4 Irms (A)5 Inductance1 DCR (mOhms) SRF typ3 Isat (A) Part number ±10% (µH) nom max (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise AGP2923-332KL3.3 2.3 2.640 95104108 19 26 AGP2923-472KL 4.7 2.3 2.63063 69 72 1926 AGP2923-682KL 6.8 2.3 2.62548 53 56 1926 AGP2923-103KL 10 2.3 2.62030 34 37 1926 AGP2923-153KL 15 2.32.6 16 20.5 23 24.5 19 26 AGP2923-223KL 22 2.3 2.613 12.214.716.4 1926 AGP2923-333KL 33 2.32.6 10 7.5 9.2 10.3 1926 1. Inductance tested at 300 kHz, 0.1 Vrms on Agilent/HP 4192A. 2. DCR measured on a Keithley 580 micro-ohmmeter or equivalent. 3. SRF measured on an Agilent/HP 4395A network analyzer and an Agilent/HP 16093B test fixture. 4. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 5. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. When Irms is greater than Isat, Isat is the more critical specification and Irms is shown in gray type. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations Electrical terminations: RoHS compliant tin-silver over copper Mounting pins: Matte tin over copper over steel Weight 37 g Ambient temperature –40°C to +140°C with Irms current Maximum part temperature +180°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +180°C. Tray packaging: –40°C to +80°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 25 parts per tray PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. These are preproduction products for electrical evaluation only. Document 932-1 Revised 09/28/11 USparts +1-847-639-6400 [email protected] Specification subject to change without notice. UK +44-1236-730595 [email protected] © Coilcraft Inc. 2016 This product may not be used in medical or high Taiwan +886-2-2264 3646 [email protected] risk applications without prior Coilcraft approval. China +86-21-6218 8074 [email protected] Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 [email protected] Document 932-2 URE T A R E P M E T HIGH Power Inductors – AGP2923 Series L vs Current L vs Frequency 100 Inductance (µH) 33 µH 22 µH 15 µH 10 µH 10 6.8 µH 4.7 µH 3.3 µH 1 0.1 1 10 100 Frequency (MHz) Dimensions are in inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 932-2 Revised 09/28/11 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.