LPS3015

Document 436-1
Shielded Power Inductors – LPS3015
• Very low DCR; excellent current handling
• Miniature 3.0 × 3.0 mm footprint; less than 1.5 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 40 – 45 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C40°C
Part number1 ±20% (µH) (Ohms)(MHz) drop drop drop rise rise
LPS3015-102MR_ 1.0
LPS3015-152MR_ 1.5
LPS3015-182MR_ 1.8
LPS3015-222MR_ 2.2
LPS3015-332MR_ 3.3
0.075
1902.42.42.51.42.0
0.100
1402.22.22.31.31.7
0.100
1352.12.12.31.11.4
0.110
1102.02.12.11.11.4
0.130901.41.51.51.01.4
LPS3015-472MR_ 4.7
LPS3015-682MR_ 6.8
LPS3015-103MR_ 10
LPS3015-153MR_ 15
LPS3015-183MR_ 18
0.200791.11.21.20.90
1.2
0.300 58 0.830.860.890.680.90
0.440 48 0.600.690.730.550.75
0.700 35 0.580.610.620.440.59
0.750 33 0.560.580.590.430.58
LPS3015-223MR_ 22
LPS3015-333MR_ 33
LPS3015-473MR_ 47
LPS3015-683MR_ 68
LPS3015-104MR_100
0.825
1.30
1.55
2.35
3.40
LPS3015-124MR_120
LPS3015-154MR_150
LPS3015-184MR_180
LPS3015-224MR_220
4.65
6.25
8.60
9.50
30 0.480.490.500.420.57
23 0.390.410.420.350.48
17 0.360.380.390.300.40
14 0.290.300.310.250.33
11 0.240.250.260.190.26
9.0
0.210.220.220.170.23
8.0
0.190.200.200.150.20
7.5
0.160.170.170.130.175
6.0
0.150.160.160.110.155
1. Please specify termination and packaging codes:
LPS3015-333MRC
Termination:R=RoHS compliant matte tin over nickel
over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise
from 25°C ambient. This information is for reference
only and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit http://order.coilcraft.com.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 436-1 Revised 09/02/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 436-2
Shielded Power Inductors – LPS3015 Series
Typical L vs Frequency
Typical L vs Current
100
100
10
Inductance (µH)
Inductance (µH)
33 µH
22 µH
10 µH
4.7 µH
3.3 µH
2.2 µH
1
0.1
1.0 µH
33 µH
22 µH
10
10 µH
4.7 µH
3.3 µH
2.2 µH
1
1.0 µH
0.1
0.01
0.1
1
Frequency (MHz)
10
0.01
0.1
Current (A)
1
10
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
NEW
123
123
123
Dimensions are in
OLD
123
123
123
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 436-1 Revised 09/02/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.