PFD2015

Document 1005W-1
Wideband Transformers – PFD2015
• Miniature surface mount component, only 2.2 × 1.45 mm
footprint and 1.5 mm tall
• Typical applications are as impedance or isolation transformer
• Can be used for balanced to unbalanced (balun) conversion
• 1/4 Watt input RF power rating
Insertion
DCR
Bandwidth
loss max L min2 max2
1
Part number
(MHz)
(dB) (µH)(Ohms)
PFD2015-102ME_
PFD2015-122ME_
PFD2015-182ME_
PFD2015-272ME_
PFD2015-332ME_
4.6 – 750
4.0 – 730
2.2 – 490
1.5 – 410
1.2 – 340
0.5
0.4
0.4
0.4
0.5
0.80
0.96
1.44
2.16
2.64
0.165
0.175
0.294
0.477
0.670
PFD2015-472ME_
PFD2015-682ME_
PFD2015-822ME_
PFD2015-103ME_
0.8 – 230
0.6 – 200
0.5 – 174
0.4 – 130
0.4
0.5
0.5
0.7
3.76
5.44
6.56
8.00
1.00
1.75
2.50
3.40
Core material Ferrite
Environmental RoHS compliant, halogen free
Weight 13 – 23 mg
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Ambient temperature –40°C to +125°C
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Winding to winding isolation 250 Vrms, one minute
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.63 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCBt_Washing.pdf.
0.090
max
2,29
1
0.059 max
1,5
1. When ordering, please specify packaging code:
PFD2015-103MEC
Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
D= 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance is for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc
on an Agilent/HP 4284A LCR meter or equivalent.
3. DCR is for each winding.
4. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.054
1,36
4
3
1:1
0.044
1,118
0.028
0,711
2
4
3
1
2
0.016
0,406
0.060
max
1,52
3
0.017
0,432
Dimensions are in
2
0.010
0,25
0.014 ±0.003
0,356 ±0,076
1
4
Recommended
Land Pattern
0.022
0,559
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
Document 1005W-1 Revised 09/08/15
Document 1005C-W
PFD2015 Wideband Transformers
0
Attenuation (dB)
Attenuation (dB)
Typical Wideband Response Curves
1
2
3
PFD2015-102
3 dB bandwidth: 4.6 – 750 MHz
4
5
0.1
1
10
100
1000
0
1
2
3
PFD2015-472
3 dB bandwidth: 0.8 – 230 MHz
4
5
0.1
10
1
0
1
2
3
PFD2015-122
3 dB bandwidth: 4.0 – 730 MHz
4
5
0.1
1
10
100
1000
Attenuation (dB)
Attenuation (dB)
1
2
3
PFD2015-182
3 dB bandwidth: 2.2 – 490 MHz
0.1
1
10
100
1000
Attenuation (dB)
Attenuation (dB)
1
2
3
PFD2015-272
3 dB bandwidth: 1.5 – 410 MHz
0.1
1
10
1000
100
1000
PFD2015-682
3 dB bandwidth: 0.6 – 200 MHz
4
5
0.1
10
1
0
1
2
3
PFD2015-822
3 dB bandwidth: 0.5 – 174 MHz
4
5
0.1
1
10
100
1000
0
1
2
3
PFD2015-103
3 dB bandwidth: 0.4 – 130 MHz
4
5
0.1
1
Frequency (MHz)
Attenuation (dB)
100
3
Frequency (MHz)
0
5
1000
2
Frequency (MHz)
4
100
1
Frequency (MHz)
0
5
1000
0
Frequency (MHz)
4
100
Frequency (MHz)
Attenuation (dB)
Attenuation (dB)
Frequency (MHz)
10
Frequency (MHz)
0
1
2
3
PFD2015-332
3 dB bandwidth: 1.2 – 340 MHz
4
5
0.1
1
10
100
1000
Frequency (MHz)
Specifications subject to change without notice.
Please check our website for latest information.
Document 1005W-2 Revised 09/08/15