RE Document 863-1 U T A R E P M E T HIGH Shielded Power Inductors – XAL7030 • High current and very low DCR • AEC-200 Grade 1 qualified (–40°C to +125°C ambient) • Soft saturation makes them ideal for VRM/VRD applications. Designer’s Kit C441 contains 3 each of all values Core material Composite Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Weight 0.83 – 0.86 g Ambient temperature –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature +165°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 400/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Irms (A)6 Inductance2 DCR (mOhms)3 SRF typ4 Isat5 Part number1 ±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise XAL7030-161ME_ 0.161.15 1.2615860.024.932.5 XAL7030-301ME_ 0.301.75 1.9210141.021.027.6 XAL7030-601ME_ 0.603.00 3.307236.018.023.0 XAL7030-102ME_ 1.0 4.55 5.006328.016.121.8 XAL7030-152ME_ 1.5 7.60 8.365123.511.915.0 XAL7030-222ME_ 2.213.7015.074018.010.012.9 XAL7030-272ME_ 2.715.7017.303612.8 9.211.4 XAL7030-332ME_ 3.319.5021.452912.3 8.010.0 XAL7030-472ME_4.7 25.20 27.7221 12.06.99.0 XAL7030-562ME_5.6 30.25 33.3017 11.55.37.3 XAL7030-682ME_6.8 38.70 42.5715 10.74.46.8 XAL7030-822ME_8.2 44.30 48.7313 10.22.95.9 XAL7030-103ME_ 10 57.00 62.70127.02.65.3 Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. 1. When ordering, please specify packaging code: XAL7030-562MEC Packaging:C=7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 863-1 Revised 09/17/15 URE T A R E P M E T HIGH Shielded Power Inductors – XAL7030 Typical L vs Frequency Document 863-2 0.295 ±0.020 7,5 ±0,5 XXX Inductance (µH) 100 10 µH 8.2 µH 6.8 µH 5.6 µH 4.7 µH 3.3 µH 2.7 µH 2.2 µH 1.5 µH 10 Dash number 0.295 ±0.020 7,5 ±0,5 Indicates orientation of terminations 1.0 µH 0.122 max 3,1 0.60 µH 1 0.30 µH 0.063 ±0.004 1,60 ±0,10 0.123 ±0.010 3,12 ±0,25 0.16 µH 0.1 0.1 1 10 Frequency (MHz) 100 0.186 4,72 0.256 6,50 0.070 1,78 Recommended Land Pattern See table Dash number -161 -301 -601 -102 -152 -222 -272 -332 -472 -562 -682 -822 -103 0.236 typ 6,0 Terminal thickness (typ) (in / mm) 0.0138 / 0.35 0.0138 / 0.35 0.0098 / 0.25 0.0079 / 0.20 0.0059 / 0.15 0.0039 / 0.10 0.0039 / 0.10 0.0039 / 0.10 0.0031 / 0.08 0.0031 / 0.08 0.0024 / 0.06 0.0024 / 0.06 0.0024 / 0.06 Dimensions are in inches mm Document 863-2 Revised 09/17/15 URE T A R E P M E T HIGH Shielded Power Inductors – XAL7030 Document 863-3 0.15 Inductance (µH) 0.20 0.16 µH 0.10 0.05 0 0 5 10 15 20 25 30 35 40 45 Current (A) 50 55 60 Inductance (µH) 0.4 0.30 µH 0.3 0.2 0.1 0 0 5 10 15 20 Current (A) 25 30 35 40 Inductance (µH) 0.8 0.6 0.60 µH 0.4 0.2 0 0 5 10 15 20 Current (A) 25 30 35 40 1.0 0.8 1.0 µH 0.6 0.4 0.2 0 0 3 6 9 12 15 18 Current (A) 21 24 2.0 1.5 1.0 27 30 1.5 µH 0.5 0 65 70 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 0 2 4 6 8 10 12 14 16 Current (A) 18 20 22 24 26 3.0 2.5 2.0 2.2 µH 1.5 1.0 0.5 0 0 4 2 10 8 6 14 12 Current (A) 18 16 20 4 3 2.7 µH 2 1 0 0 2 4 6 8 Current (A) 10 12 14 16 4 3 3.3 µH 2 1 0 0 1 2 3 4 5 6 7 8 Current (A) 9 10 11 12 13 14 Document 863-3 Revised 09/17/15 URE T A R E P M E T HIGH Shielded Power Inductors – XAL7030 Document 863-4 Inductance (µH) Inductance (µH) 6 5 4 4.7 µH 3 2 1 0 0 1 2 4 3 5 7 6 Current (A) 9 8 10 11 12 13 6 Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 5 4 5.6 µH 3 2 1 0 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 8 9 10 11 12 Current (A) 10 8 6 8.2 µH 4 2 0 0 1 3 2 4 5 6 7 Current (A) 8 9 10 11 12 12 10 10 µH 8 6 4 2 0 0 1 2 3 4 5 6 Current (A) 7 8 9 10 6.8 µH 0 1 2 3 4 5 6 Current (A) Document 863-4 Revised 09/17/15