Document 804-1 RE U T A R E P M E T HIGH Shielded Power Inductors – XAL1010 • High current – up to 98.8 A; very low DCR – 0.45 mOhms • AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient) • Soft saturation makes them ideal for VRM/VRD applications. Core material Composite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Weight 5.7 – 6.3 g Ambient temperature –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature +165°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 300/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing, 10.21 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. DCR (mOhms)3 SRF typ4 Irms (A)6 Inductance2 Isat5 Part number1 ±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise XAL1010-221ME_ 0.22 0.450.50 115 98.8 41.0 55.5 XAL1010-451ME_ 0.45 0.650.72 66 70.5 40.0 53.0 XAL1010-681ME_ 0.68 0.870.96 53 62.0 36.0 48.0 XAL1010-102ME_ 1.0 1.001.10 42 55.0 32.0 43.5 XAL1010-152ME_ 1.5 1.601.76 33 36.6 31.0 40.5 XAL1010-222ME_ 2.2 2.552.80 22 34.0 24.5 32.0 XAL1010-332ME_ 3.3 3.704.10 21 27.4 18.2 25.0 XAL1010-472ME_ 4.7 5.205.70 19 25.4 17.5 24.0 XAL1010-562ME_ 5.6 6.306.93 16 23.6 15.7 21.2 XAL1010-682ME_ 6.8 8.108.90 14 21.8 14.0 18.5 XAL1010-822ME_ 8.2 11.7012.90 12 18.3 12.9 17.1 XAL1010-103ME_ 10 13.4014.75 11 17.5 11.5 15.5 XAL1010-153ME_ 15 16.9018.60 9 15.5 9.9 13.8 Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. 1. When ordering, please specify termination and packaging coded: XAL1010-153MED Termination:E=RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 804-1 Revised 09/08/15 Document 804-2 URE T A R E P M E T HIGH Shielded Power Inductors – XAL1010 Inductance (µH) 0.4 0.3 0.22 µH 0.2 0.1 0 0 10 20 30 40 50 60 Current (A) 70 80 90 100 Inductance (µH) 0.6 0.5 0.4 0.45 µH 0.3 0.2 0.1 0 0 10 20 30 40 50 60 Current (A) 70 80 90 Inductance (µH) 1.2 1.0 0.8 0.6 0.68 µH 0.4 0.2 0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 10 20 30 40 Current (A) 50 60 70 80 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Typical L vs Current 1.0 µH 0 10 20 30 40 Current (A) 50 60 70 80 2.0 1.6 1.5 µH 1.2 0.8 0.4 0 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 45 50 55 60 35 40 45 50 55 60 Current (A) 2.2 µH 0 5 10 15 20 25 30 Current (A) 5 4 3 3.3 µH 2 1 0 0 5 10 15 20 25 30 35 40 45 50 30 35 40 45 50 Current (A) 6 5 4 4.7 µH 3 2 1 0 0 5 10 15 20 25 Current (A) Document 804-2 Revised 09/08/15 Document 804-3 URE T A R E P M E T HIGH Shielded Power Inductors – XAL1010 Inductance (µH) Inductance (µH) 10 8 6 5.6 µH 4 2 0 0 5 10 15 Current (A) 20 25 30 10 Inductance (µH) Inductance (µH) Inductance (µH) Typical L vs Current 8 6.8 µH 6 4 2 0 0 5 10 15 Current (A) 20 25 30 16 12 8 10 µH 4 0 0 2 4 6 8 10 12 14 16 18 20 12 14 16 18 20 Current (A) 20 16 12 15 µH 8 4 0 0 2 4 6 8 10 Current (A) 12 10 8 8.2 µH 6 4 2 0 0 2 4 6 8 10 12 Current (A) 14 16 18 20 Document 804-3 Revised 09/08/15 Document 804-4 URE T A R E P M E T HIGH Shielded Power Inductors – XAL1010 Typical L vs Frequency 0.394 ±0.020 10,0 ±0,50 XXX Inductance (µH) 100 15 µH 10 µH 6.8 µH 4.7 µH 10 0.445 ±0.020 11,3 ±0,50 2.2 µH Dash number 1.5 µH 1.0 µH 0.68 µH 1 Indicates orientation of terminations 0.344 typ 8,74 Dash number -221 -451 -681 -102 -152 -222 -332 -472 -562 -682 -822 -103 -153 Terminal thickness typ (in / mm) 0.0394 / 1.0 0.0394 / 1.0 0.0394 / 1.0 0.0394 / 1.0 0.0315 / 0.80 0.0236 / 0.60 0.0157 / 0.40 0.0157 / 0.40 0.0157 / 0.40 0.0118 / 0.30 0.0079 / 0.20 0.0079 / 0.20 0.0079 / 0.20 See note 0.45 µH 0.22 µH 0.1 0.1 10 1 0.394 max* 10,0 100 Frequency (MHz) 0.087±0.004 2,20 ±0,10 0.175 ±0.010 4,45 ±0,25 Irms Derating 110 copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0,13 mm 0.354 9,0 80 70 Note: Parts manufactured prior to March, 2014 may have a raised circular portion on top. The maximum height is the same for all parts. 60 0.094 2,38 50 Recommended Land Pattern 40 25°C Percent of rated Irms 100 90 0.315 typ 8,0 * For optional tin-lead and tin-silver- 0.262 6,65 120 See table 30 Dimensions are in inches mm 20 10 0 -40 -20 0 20 40 60 80 100 120 140 160 180 Ambient temperature (°C) Document 804-4 Revised 09/08/15