XAL5030

Document 908-1
RE
U
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL50xx
• High current; very low DCR; soft saturation
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
Designer’s Kit C445 contains 3 of each value
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper
Other terminations available at additional cost.
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
Inductance2 SRF typ4
Isat5 Part number1
±20% (µH)
typ max
(MHz)
(A) 20°C rise 40°C rise
XAL5030-161ME_ 0.16
2.152.36 183 31.0 14.2 22.2
XAL5030-331ME_ 0.33
3.203.52 108 26.0 13.8 19.2
XAL5030-601ME_ 0.60
4.114.52
75 19.8 13.6 17.7
XAL5030-801ME_ 0.80
5.145.65
63 18.5 10.0 13.0
XAL5030-102ME_ 1.0
8.509.40
68 14.0 8.7 11.1
XAL5030-222ME_ 2.2
13.2014.50
38
9.2 7.2
9.7
XAL5030-332ME_ 3.3
21.2023.30
28
8.7 5.9
8.1
XAL5030-472ME_ 4.7
36.0040.00
23
6.7 4.3
5.9
XAL5050-562ME_ 5.6
23.4525.80
25
6.3 5.3
7.2
XAL5050-682ME_ 6.8
26.7529.45
21
6.0 4.7
6.4
XAL5050-822ME_ 8.2
31.7534.95
18
5.6 4.5
6.1
XAL5050-103ME_ 10
40.9045.00
15
4.9 3.6
4.9
XAL5050-153ME_ 15
69.7076.70
13
3.7 2.9
3.9
XAL5050-223ME_ 22
90.6099.65
11
3.6 2.5
3.4
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
1. When ordering, please specify packaging code:
XAL5030-472MEC
Packaging:C=7″ machine-ready reel. EIA-481 embossed plastic tape.
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 908-1 Revised 07/09/15
Document 908-2
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL50xx
0.20
Inductance (µH)
0.30
0.25
0.16 µH
0.15
0.10
0.05
0
0
5
10
15
20
25
Current (A)
30
35
Inductance (µH)
0.6
0.5
0.4
0.33 µH
0.3
0.2
0.1
0
10
5
0
15
Current (A)
20
25
30
Inductance (µH)
1.0
0.8
0.6
0.60 µH
0.4
0.2
0
10
5
0
15
20
Current (A)
25
1.2
1.0
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
0.8
0.80 µH
0.6
0.4
0.2
0
0
2
4
6
8
10
12
Current (A)
14
16
18
20
1.6
1.2
1.0 µH
0.8
0.4
0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0
1
2
3
5
4
6
7
8
9
Current (A)
10
11 12 13 14 15
2.2 µH
0
1
2
3
4
5
6
7
8
9
10
11 12
7
8
9
10
11 12
Current (A)
5
4
3
3.3 µH
2
1
0
0
1
2
3
4
5
6
Current (A)
6
5
4
4.7 µH
3
2
1
0
0
1
2
3
4
5
6
Current (A)
7
8
9
10
Document 908-2 Revised 07/09/15
Document 908-3
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL50xx
Inductance (µH)
8
7
6
5
4
3
2
1
0
5.6 µH
0
1
2
3
4
Current (A)
5
6
7
8
Inductance (µH)
10
8
6
6.8 µH
4
2
0
0
1
2
3
4
Current (A)
5
6
7
8
12
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
10
8
8.2 µH
6
4
2
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Current (A)
4.0
4.5
5.0
5.5 6.0
16
12
10 µH
8
4
0
0
0.5
1.0
1.5
2.0
2.5
3.0
Current (A)
3.5
4.0
4.5 5.0
20
16
12
15 µH
8
4
0
0
0.5
1.0
1.5
2.0
Current (A)
2.5
3.0
3.5
4.0
2.5
3.0
3.5
4.0
30
25
20
22 µH
15
10
5
0
0
0.5
1.0
1.5
2.0
Current (A)
Document 908-3 Revised 07/09/15
Document 908-4
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL50xx
Typical L vs Frequency
0.208 ±0.008
5,28 ±0,2
22 µH
15 µH
10 µH
6.8 µH
4.7 µH
3.3 µH
2.2 µH
1.0 µH
0.80 µH
10
XXX
Inductance (µH)
100
0.216 ±0.008
5,48 ±0,2
Indicates orientation
of terminations
Dash
number
See
height table
1
0.60 µH
0.039 ±0.002
1,0 ±0,05
0.091 ±0.010
2,31 ±0.25
0.33 µH
0.1
Maximum
height
Weight
XAL5030 0.122 / 3,1 0.44 – 0.51 g
XAL5050 0.201 / 5,1 0.74 – 0.80 g
0.16 µH
0.1
1
10
Frequency (MHz)
100
0.130
3,31
0.185
4,70
0.046
1,18
Recommended
Land Pattern
Dimensions are in inches
mm
See
table
Dash
number
-161
-331
-601
-801
-102
-222
-332
-472
-562
-682
-822
-103
-153
-223
0.165
typ
4,2
Terminal
thickness (typ)
(in / mm)
0.0079 / 0.20
0.0079 / 0.20
0.0079 / 0.20
0.0079 / 0.20
0.0047 / 0.12
0.0047 / 0.12
0.0039 / 0.10
0.0028 / 0.07
0.0047 / 0.12
0.0047 / 0.12
0.0047 / 0.12
0.0039 / 0.10
0.0028 / 0.07
0.0028 / 0.07
Packaging
XAL5030 400/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.18 mm pocket depth
XAL5050 250/7″ reel; 750/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 5.21 mm pocket depth
Document 908-4 Revised 07/09/15