Document 796A-1 Shielded Power Inductor XFL6060-473 • Designed for STMicroelectronics LED5000 3 A monolithic step-down current source • High current and low DCR; soft saturation Core material Composite Terminations RoHS compliant tin-silver over copper. Environmental RoHS compliant, halogen free Weight 1.3 g Ambient temperature –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature +165°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 250/7″ reel; 750/13″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 6.23 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Irms (A)6 DCR (mOhms)3 Isat (A)5 Inductance2 SRF typ4 Part number1 ±20% (µH) typ max (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise XFL6060-473ME_ 47 68.475.3 7.8 1.4 1.6 1.8 2.8 3.7 1. When ordering, please specify packaging code: XFL6060-473MEC Packaging:C=7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (750 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. Document 796A-1 Revised 09/17/15 Document 796A-2 Shielded Power Inductors – XFL6060-473 L vs Frequency 1000 60 50 47 µH 40 30 20 10 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Current (A) 1.4 1.6 1.8 2.0 Inductance (µH) Inductance (µH) L vs Current 47 µH 100 0.250 ±0.008 6,36 ±0,2 XXX 10 0.258 ±0.008 6,56 ±0,2 0.1 1 10 100 Frequency (MHz) Dash number 0.240 max 6,1 Recommended Land Pattern 0.049 ±0.004 1,25 ±0,10 0.159 4,04 0.200 5,08 0.116 ±0.004 2,95 ±0,10 Dimensions are in 0.204 5,18 0.056 1,43 inches mm Document 796A-2 Revised 09/17/15