UNISONIC TECHNOLOGIES CO., LTD U74AHCT1G86 CMOS IC 2-INPUT EXCLUSIVE-OR GATE DESCRIPTION The U74AHCT1G86 is a 2-input EXCLUSIVE-OR gate, it provides the Function Y=A⊕B. FEATURES * Low Power Current: * High Speed: * High Noise Immunity ICC=1.0μA(Max) tPD=5ns(Typ) ORDERING INFORMATION Ordering Number U74AHCT1G86G-AF5-R U74AHCT1G86G-AL5-R Package SOT-25 SOT-353 Packing Tape Reel Tape Reel MARKING 5 4 T86G 1 2 3 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 4 QW-R502-067.E U74AHCT1G86 CMOS IC PIN CONFIGURATION VCC 5 1 A 2 B 3 GND FUNCTION TABLE (each gate) INPUT A L L H H Y 4 B L H L H OUTPUT Y L H H L LOGIC DIAGRAM (positive logic) Logic symbol IEC logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R502-067.E U74AHCT1G86 CMOS IC ABSOLUTE MAXIMUM RATINGS (unless otherwise specified)(Note 1) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~7 V Input Voltage VIN -0.5~7 V Output Voltage VOUT -0.5~VCC+0.5 V Input Clamp Current IIK -20 mA Output Clamp Current IOK ±20 mA Output Current IOUT ±25 mA VCC or GND Current ICC ±50 mA Storage Temperature TSTG -65 ~ +150 °С Notes: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Input Transition Rise or Fall Rate Operating Temperature SYMBOL VCC VIN VOUT tR, tF TA SYMBOL VIH VIL High-Level Output Voltage VOH Low-Level Output Voltage VOL Input Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Input Capacitance TYP MAX 5.5 5.5 VCC 20 85 UNIT V V V ns/V °С TYP MAX UNIT V V VCC=5.0+0.5V -40 II(LEAK) IQ IQ CIN TEST CONDITIONS VCC=4.5V~5.5V VCC=4.5V~5.5V VCC=4.5V, IOH=-50μA VCC=4.5V, IOH=-8mA VCC=4.5V, IOL=50μA VCC=4.5V, IOL=8mA VCC=5.5V, VIN=VCC or GND VCC=5.5V, VIN=VCC or GND IOUT=0 VCC=5.5V, VIN=3.4V; IOUT=0; other input at VCC or GND VIN=VCC or GND MIN 2.0 0.8 4.4 3.94 4.5 4 V 0.1 0.36 ±0.1 μA 1 μA 1.35 mA 10 pF V DYNAMIC CHARACTERISTICS (TA=25°С, tR, tF≤3ns; PRR≤1MHz, unless otherwise specified) PARAMETER Propagation delay from input (A or B) to output(Y) MIN 4.5 0 0 STATIC CHARACTERISTICS (TA=25°С, unless otherwise specified) PARAMETER High-Level Input Voltage Low-Level Input Voltage CONDITIONS SYMBOL tPLH tPHL tPLH tPHL TEST CONDITIONS MIN VCC=5±0.5V, CL=15pF VCC=5±0.5V, CL=50pF TYP 5 5 5.5 5.5 MAX 6.9 6.9 7.9 7.9 UNIT TYP 18 MAX UNIT pF ns OPERATING CHARACTERISTICS (TA=25°С, unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC=5V, f=1MHz, No load UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 3 of 4 QW-R502-067.E U74AHCT1G86 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R502-067.E