Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC2G32
CMOS IC
DUAL 2-INPUT POSITIVE-OR
GATE
„
DESCRIPTION
The U74LVC2G32 is a dual 2-input OR gate which performs the
function Y=A+B or Y=A * B . It is designed for 1.65V to 5.5V
operation.
„
FEATURES
* Wide Supply Voltage Range from 1.65V to 5.5V
* Max tPD of 3.8 ns at 3.3V
* Up to 5.5V Inputs Accept Voltages
* Low Power Consumption, ICC = 10 μA (Max.)
* ±24 mA Output Driver at 3.3V
* Typical VOLP (Output Ground Bounce) < 0.8V,
VCC = 3.3 V, TA = 25 °C
* Typical VOHV (Output VOH Undershoot) > 2V,
VCC = 3.3 V, TA = 25 °C
„
ORDERING INFORMATION
Ordering Number
U74LVC2G32G-SM1-R
Package
MSOP-8
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
Packing
Tape Reel
1 of 6
QW-R502-431.A
U74LVC2G32
CMOS IC
„
PIN CONFIGURATION
„
FUNCTION TABLE (Each Gate)
INPUTS
A
L
L
H
H
„
B
L
H
L
H
OUTPUT
Y
L
H
H
H
LOGIC DIAGRAM (Positive Logic)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R502-431.A
U74LVC2G32
„
CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage
VCC
-0.5~6.5
V
Input Voltage
VIN
-0.5~6.5
V
Output Voltage
-0.5~6.5
V
VOUT
(any output in the high-impedance or power-off state)
Output Voltage (any output in the high or low state)
VOUT
-0.5~VCC+0.5
V
Input Clamp Current
IIK
-50
mA
Output Clamp Current
IOK
-50
mA
Output Current
IOUT
±50
mA
VCC or GND Current
ICC
±100
mA
Storage Temperature
TSTG
-65 ~ +150
°C
Note: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
THERMAL DATA
PARAMETER
Junction to Ambient
„
SYMBOL
θJA
RATINGS
220
UNIT
°C /W
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage
High-Level Input Voltage
Low-Level Input Voltage
Input Voltage
Output Voltage
SYMBOL
VCC
VIH
VIL
CONDITIONS
Operating
Data retention only
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
VIN
VOUT
MIN
1.65
1.5
IOH
Input Transition Rise or Fall Rate
Operating Temperature
IOL
t R / tF
TA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
UNIT
V
1.7
2
V
0.7* VCC
0.35* VCC
0
0
VCC=3V
VCC=4.5V
VCC=1.65V
VCC=2.3V
Low-level Output Current
MAX
5.5
0.65* VCC
VCC=1.65V
VCC=2.3V
High-level Output Current
TYP
VCC=3V
VCC=4.5V
VCC=1.8±0.15V, 2.5±0.2V
VCC=3.3±0.3V
VCC=5.0+0.5V
-40
0.7
V
0.8
0.3* VCC
5.5
V
VCC
V
-4
-8
mA
-16
-24
-32
4
8
mA
16
24
32
20
ns/V
10
5
85
°C
3 of 6
QW-R502-431.A
U74LVC2G32
„
CMOS IC
ELECTRICAL CHARACTERISTICS (TA =25°C, VCC = 3.3 V , unless otherwise specified)
PARAMETER
High-Level Output Voltage
Low-Level Output Voltage
Input Leakage Current
OFF-state Current
Quiescent Supply Current
SYMBOL
VOH
VOL
II(LEAK)
IOFF
IQ
Additional quiescent Supply Current
Δ IQ
Input Capacitance
CIN
„
MAX
UNIT
V
0.1
0.45
0.3
0.4
0.55
0.55
±5
±10
μA
μA
10
μA
500
μA
V
pF
SWITCHING CHARACTERISTICS (TA =25°C)
PARAMETER
Propagation delay from input
(A or B) to output (Y)
„
TEST CONDITIONS
MIN TYP(1)
IOH = -100 μA VCC = 1.65V to 5.5V VCC -0.1
IOH = -4 mA VCC = 1.65V
1.2
IOH = -8 mA VCC = 2.3V
1.9
IOH = -16 mA VCC = 3V
2.4
IOH = -24 mA VCC = 3V
2.3
IOH = -32 mA VCC = 4.5V
3.8
IOL = 100 μA VCC = 1.65V to 5.5V
IOL = 4 mA
VCC = 1.65V
IOL = 8 mA
VCC = 2.3V
IOL = 16 mA VCC = 3V
IOL = 24 mA VCC = 3V
IOL = 32 mA VCC = 4.5V
VIN = 5.5V or GND, VCC = 0 to 5.5V
VIN or VO = 5.5V, VCC = 0V
VIN = 5.5V or GND, IOUT = 0, VCC =
1.65V to 5.5V
One input at VCC – 0.6V;
other inputs at VCC or GND;
VCC=3V to 5.5V
VIN = VCC or GND, VCC=3.3V
5
SYMBOL
tPLH / tPHL
TEST CONDITIONS
VCC=1.8±0.15V, RL=1KΩ
CL=30pF
VCC=2.5±0.2V, RL=500Ω
VCC=3.3±0.3V, RL=500Ω
CL=50pF
VCC=5±0.5V, RL=500Ω
MIN
2.4
1
1
1
TYP
MIN
TYP
17
17
17
19
MAX
8
4.4
3.8
3.2
UNIT
MAX
UNIT
ns
OPERATING CHARACTERISTICS (TA =25°C)
PARAMETER
Power Dissipation Capacitance
SYMBOL
CPD
TEST CONDITIONS
VCC = 1.8V
VCC = 2.5V
f=10MHz
VCC = 3.3V
VCC = 5V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
pF
4 of 6
QW-R502-431.A
U74LVC2G32
„
CMOS IC
TEST CIRCUIT AND WAVEFORMS
From Output
CL
VCC
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
RL
INPUTS
VIN
VCC
tR, tF
≤2ns
VCC
3V
VCC
≤2ns
≤2.5ns
≤2.5ns
VM
CL
RL
VCC/2
VCC/2
1.5V
VCC/2
30pF
30pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
VIN
Input
VM
VM
Output
0V
t P HL
t PLH
VM
VM
VOH
VOL
t P HL
t PLH
VOH
Output
VM
VM
VOL
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R502-431.A
U74LVC2G32
CMOS IC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-431.A