UNISONIC TECHNOLOGIES CO., LTD U74LVC2G00 CMOS IC DUAL 2-INPUT POSITIVE-NAND GATE DESCRIPTION SOP-8 The U74LVC2G00 is a dual 2-input NAND gate which performs the function Y=A*B or Y=A + B . It is designed for 1.65V to 5.5V operation. FEATURES * Wide Supply Voltage Range from 1.65V to 5.5V * Max tPD of 4.3 ns at 3.3V * Up to 5.5V Inputs Accept Voltages * Low Power Consumption, ICC = 10 μA (Max.) * ±24 mA Output Driver at 3.3V * Typical VOLP (Output Ground Bounce) < 0.8V, VCC = 3.3 V, TA = 25 °C * Typical VOHV (Output VOH Undershoot) > 2V, VCC = 3.3 V, TA = 25 °C MSOP-8 ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74LVC2G00L-S08-R U74LVC2G00G-S08-R U74LVC2G00L-S08-T U74LVC2G00G-S08-T U74LVC2G00L-SM1-R U74LVC2G00G-SM1-R U74LVC2G00L-SM1-T U74LVC2G00G-SM1-T www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package Packing SOP-8 SOP-8 MSOP-8 MSOP-8 Tape Reel Tube Tape Reel Tube 1 of 6 QW-R502-428.B U74LVC2G00 CMOS IC PIN CONFIGURATION FUNCTION TABLE (Each Gate) INPUTS A L L H H B L H L H OUTPUT Y H H H L LOGIC DIAGRAM (Positive Logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-428.B U74LVC2G00 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~6.5 V Input Voltage VIN -0.5~6.5 V Output Voltage VOUT -0.5~6.5 V (any output in the high-impedance or power-off state) Output Voltage (any output in the high or low state) VOUT -0.5~VCC+0.5 V Input Clamp Current IIK -50 mA Output Clamp Current IOK -50 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±100 mA Storage Temperature TSTG -65 ~ +150 °C Note: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL MSOP-8 SOP-8 θJA RATINGS 220 150 UNIT °C /W RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage High-Level Input Voltage Low-Level Input Voltage Input Voltage Output Voltage SYMBOL VCC VIH VIL CONDITIONS Operating Data retention only VCC = 1.65V to 1.95V VCC = 2.3V to 2.7V VCC = 3V to 3.6V VCC = 4.5V to 5.5V VCC = 1.65V to 1.95V VCC = 2.3V to 2.7V VCC = 3V to 3.6V VCC = 4.5V to 5.5V VIN VOUT MIN 1.65 1.5 IOH 1.7 2 IOL Input Transition Rise or Fall Rate t R / tF Ambient Operating Temperature TOPR www.unisonic.com.tw V V 0.35* VCC 0 0 VCC=3V VCC=3V VCC=4.5V VCC=1.8±0.15V, 2.5±0.2V VCC=3.3±0.3V VCC=5.0+0.5V UNISONIC TECHNOLOGIES CO., LTD UNIT 0.7* VCC VCC=4.5V VCC=1.65V VCC=2.3V Low-level Output Current MAX 5.5 0.65* VCC VCC=1.65V VCC=2.3V High-level Output Current TYP -40 0.7 V 0.8 0.3* VCC 5.5 V VCC V -4 -8 mA -16 -24 -32 4 8 mA 16 24 32 20 ns/V 10 5 85 °C 3 of 6 QW-R502-428.B U74LVC2G00 CMOS IC ELECTRICAL CHARACTERISTICS (TA =25°C, VCC = 3.3 V, unless otherwise specified) PARAMETER High-Level Output Voltage Low-Level Output Voltage Input Leakage Current OFF-State Current Quiescent Supply Current SYMBOL VOH VOL II(LEAK) IOFF IQ Additional Quiescent Supply Current Δ IQ Input Capacitance CIN MAX UNIT V 0.1 0.45 0.3 0.4 0.55 0.55 ±5 ±10 μA μA 10 μA 500 μA V pF SWITCHING CHARACTERISTICS (TA =25°C) PARAMETER Propagation delay from input (A or B) to output (Y) TEST CONDITIONS MIN TYP IOH = -100 μA VCC = 1.65V to 5.5V VCC -0.1 IOH = -4 mA VCC = 1.65V 1.2 IOH = -8 mA VCC = 2.3V 1.9 IOH = -16 mA VCC = 3V 2.4 IOH = -24 mA VCC = 3V 2.3 IOH = -32 mA VCC = 4.5V 3.8 IOL = 100 μA VCC = 1.65V to 5.5V IOL = 4 mA VCC = 1.65V IOL = 8 mA VCC = 2.3V IOL = 16 mA VCC = 3V IOL = 24 mA VCC = 3V IOL = 32 mA VCC = 4.5V VIN = 5.5V or GND, VCC = 0 to 5.5V VIN or VO = 5.5V, VCC = 0V VIN = 5.5V or GND, IOUT = 0, VCC = 1.65V to 5.5V One input at VCC – 0.6V; other inputs at VCC or GND; VCC=3V to 5.5V VIN = VCC or GND, VCC=3.3V 5 SYMBOL tPLH / tPHL TEST CONDITIONS VCC=1.8±0.15V, RL=1KΩ CL=30pF VCC=2.5±0.2V, RL=500Ω VCC=3.3±0.3V, RL=500Ω CL=50pF VCC=5±0.5V, RL=500Ω MIN 3.7 1.6 1.1 1 TYP MAX UNIT 8.6 4.8 ns 4.3 3.3 MIN TYP 19 19 20 22 MAX UNIT OPERATING CHARACTERISTICS (TA =25°C) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC = 1.8V VCC = 2.5V f=10MHz VCC = 3.3V VCC = 5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw pF 4 of 6 QW-R502-428.B U74LVC2G00 CMOS IC TEST CIRCUIT AND WAVEFORMS VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V INPUTS VIN VCC tR, tF ≤2ns VCC 3V VCC ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω VIN Input VM VM Output 0V t P HL t PLH VM VM VOH VOL t P HL t PLH VOH Output VM VM VOL Notes: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-428.B U74LVC2G00 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-428.B