UNISONIC TECHNOLOGIES CO., LTD U74LVC1G06 CMOS IC SINGLE INVERTER WITH OPEN-DRAIN OUTPUT DESCRIPTION The U74LVC1G06 is a single inverter and its output is an open drain. This device provides the Function Y= A in positive logic. FEATURES * Operate From 1.65V to 5.5V * Input and Open-Drain Output Accept Voltages to 5.5V * IOFF Supports Partial-Power-Down Mode * Low Power Dissipation * Max tPD of 4 ns at 3.3V ORDERING INFORMATION Ordering Number U74LVC1G06G-AE5-R U74LVC1G06G-AL5-R Package SOT-23-5 SOT-353 Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-399.D U74LVC1G06 PIN CONFIGURATION FUNCTION TABLE INPUT(A) H L Note: H: High Voltage Level L: Low Voltage Level Z: High-Impedance OFF-State CMOS IC OUTPUT(Y) L Z LOGIC DIAGRAM (Positive Logic) Logic Symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw IEC Logic Symbol 2 of 5 QW-R502-399.D U74LVC1G06 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL VCC VIN Supply Voltage Input Voltage RATINGS -0.5 ~ +6.5 -0.5 ~ +6.5 -0.5 ~ +6.5 UNIT V V V RATINGS 280 350 UNIT Output in the High or Low State VOUT Output in the High-Impedance or -0.5 ~ +6.5 V Power-Off State VCC or GND Current ICC ±100 mA Continuous Output Current (VOUT=0 to VCC) IOUT ±50 mA Input Clamp Current (VIN<0) IIK -50 mA Output Clamp Current (VOUT<0) IOK -50 mA Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Output Voltage THERMAL DATA PARAMETER SOT-23-5 Junction to Ambient SOT-353 SYMBOL θJA °C/W RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Output Voltage VIN VOUT Low-Level Output Current IOL Operating Temperature TA Input Transition Rise or Fall Rate tR / tF TEST CONDITIONS Operating Data retention only VCC=1.65V VCC=2.3V VCC=3V VCC=3V VCC=4.5V -40 VCC=1.8V±0.15V,2.5V±0.2V VCC=3.3V±0.3V VCC=5V±0.5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.65 1.5 0 0 TYP MAX 5.5 5.5 VCC 4 8 16 24 32 85 20 10 5 UNIT V V V V mA mA mA mA mA °C ns/V ns/V ns/V 3 of 5 QW-R502-399.D U74LVC1G06 CMOS IC ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER SYMBOL High-Level Input Voltage VIH Low-Level Input Voltage VIL Low-Level Output Voltage VOL Input Leakage Current Power OFF Leakage Current 3-state Output OFF-state Current II(LEAK) IOFF IOZ Quiescent Supply Current IQ Additional Quiescent Supply Current Per Input Pin Input Capacitance Output Capacitance CI CO SWITCHING CHARACTERISTICS (TA=25°С) PARAMETER Propagation delay from input (A) to output(Y) ∆IQ TEST CONDITIONS MIN TYP MAX UNIT VCC=1.65V ~ 1.95V V 0.65*VCC VCC=2.3V ~ 2.7V V 1.7 VCC=3V ~ 3.6V 2 V VCC=4.5V ~ 5.5V V 0.7*VCC VCC=1.65V ~ 1.95V V 0.35*VCC VCC=2.3V ~ 2.7V 0.7 V VCC=3V ~ 3.6V 0.8 V VCC=4.5V ~ 5.5V V 0.3*VCC IOL=100μA VCC=1.65 ~ 5.5V 0.1 V IOL=4mA VCC=1.65V 0.45 V IOL=8mA VCC=2.3V 0.3 V IOL=16mA VCC=3.0V 0.4 V IOL=24mA VCC=3.0V 0.55 V IOL=32mA VCC=4.5V 0.55 V VIN=5.5V or GND, VCC=0 ~ 5.5V ±5 μA VIN or VOUT=5.5V, VCC=0V μA 10 VIN=VIH or VIL, VOUT=VCC or GND, VCC μA ±10 =5.5V VIN=VCC or GND, IOUT=0 10 μA VCC=1.65 ~ 5.5V VCC=3 ~ 5.5V, One input at VCC-0.6V, 500 μA Other inputs at VCC or GND VCC=3.3V, VIN=VCC or GND 4 pF VCC=3.3V, VOUT=VCC or GND 5 pF SYMBOL tPZL / tPLZ TEST CONDITIONS VCC=1.8±0.15V, RL=1KΩ CL=30pF VCC=2.5±0.2V, RL=500Ω VCC=3.3±0.3V CL=50pF RL=500Ω VCC=5±0.5V MIN 2.2 1.1 1.2 1 TYP MAX 6.5 6 6 5.5 UNIT ns ns ns ns MIN TYP 3 3 4 6 MAX UNIT pF pF pF pF OPERATING CHARACTERISTICS (TA=25°С) PARAMETER SYMBOL Power Dissipation Capacitance CPD TEST CONDITIONS VCC=1.8V VCC=2.5V f=10MHZ VCC=3.3V VCC=5.0V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-399.D U74LVC1G06 CMOS IC TEST CIRCUIT AND WAVEFORMS Inputs VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VIN VCC VCC 3V VCC tR, tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM VLOAD V∆ CL RL VCC/2 VCC/2 1.5V VCC/2 2 x VCC 2 x VCC 6V 2 x VCC 0.15V 0.15V 0.3V 0.3V 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω Propagation Delay Times UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-399.D