Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC1G18
Preliminary
CMOS IC
1-OF-2 NON-INVERTING
DEMULTIPLEXER WITH 3-STATE
DESELECTED OUTPUT
„
4
1
DESCRIPTION
The U74LVC1G18 is a 1-of-2 non-inverting demultiplexer with
3-state output. When the select input S is low data passes from A
(input) to 1Y (output) and 2Y (output) is in the high-impedance state.
When the select input S is high data passes from A (input) to 2Y
(output) and 1Y (output) is in the high-impedance state.
The U74LVC1G18 is designed for 1.65V to 5.5V operation and
it can be driven from either 3.3V or 5.5V devices. Therefore, it can
be used in a mixed 3.3V and 5V environment.
The U74LVC1G18 is fully specified for partial-power-down
applications using IOFF. The IOFF circuitry disables the outputs and
prevents damaging current backflow through the device when it is
powered down.
„
5
6
2
3
SOT-363
6
5
4
1
2
3
SOT-26
FEATURES
* Wide supply voltage range from 1.65V to 5.5V
* Max tPD of 3.4 ns at 3.3V
* Up to 5.5V inputs accept voltages
* Low power consumption, ICC = 10 μA (Max.)
* ±24 mA output driver at 3.3V
* Typical VOLP (Output Ground Bounce) < 0.8V,
VCC = 3.3 V, TA = 25 ℃
* Typical VOHV (Output VOH undershoot) > 2V,
VCC = 3.3 V, TA = 25 ℃
* IOFF supports partial-power-down mode operation
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
U74LVC1G18L-AL6-R
U74LVC1G18G-AL6-R
U74LVC1G18L-AG6-R
U74LVC1G18G-AG6-R
U74LVC1G18L-AL6-R
(1)Packing Type
Package
Packing
SOT-363
SOT-26
Tape Reel
Tape Reel
(1) R: Tape Reel
(2)Package Type
(2) AL6: SOT-363, AG6: SOT-26
(3)Lead Free
(3) G: Halogen Free, L: Lead Free
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 7
QW-R502-559.a
U74LVC1G18
Preliminary
CMOS IC
MARKING
„
6
5
4
3A8□
1
2
G: Halogen Free
L: Lead Free
3
„
PIN CONFIGURATION
„
FUNCTION TABLE
INPUTS
S
L
L
H
H
H=High Level
OUTPUT
A
L
H
L
H
Y0
L
H
Z
Z
Y1
Z
Z
L
H
L=Low Level
„
LOGIC DIAGRAM (positive logic)
6
S
A
1
3
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
Y0
4
Y1
2 of 7
QW-R502-559.a
U74LVC1G18
„
Preliminary
CMOS IC
ABSOLUTE MAXIMUM RATING (unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage
VCC
-0.5~6.5
V
Input Voltage
VIN
-0.5~6.5
V
Output Voltage (any output in the high-impedance or
VOUT
-0.5~6.5
V
power-off state)
Output Voltage (any output in the high or low state)
VOUT
-0.5~VCC+0.5
V
Input Clamp Current
IIK
-50
mA
Output Clamp Current
IOK
-50
mA
Output Current
IOUT
±50
mA
VCC or GND Current
ICC
±100
mA
Ptot
mW
Power Dissipation
TA=-40°C to +85°C
250
Storage Temperature
TSTG
-65 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
„
THERMAL DATA
PARAMETER
SYMBOL
SOT-363
SOT-26
Junction to Ambient
„
θJA
RATINGS
350
230
UNIT
°C/W
RECOMMENDED OPERATING COMDITIONS
PARAMETER
Supply Voltage
SYMBOL
VCC
High
VIH
Input Voltage
Low
Input Voltage
Output Voltage
VIL
VIN
VOUT
High
IOH
TEST CONDITIONS
Operating
Data retention only
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
High or low state
VCC=1.65V
VCC=2.3V
MIN
1.65
1.5
0.65* VCC
1.7
2
0.7* VCC
0
0
VCC=3V
VCC=4.5V
VCC=1.65V
VCC=2.3V
Output Current
Low
Input Transition Rise or Fall Rate
Operating Temperature
IOL
Δt/Δv
VCC=3V
VCC=4.5V
VCC=1.8±0.15V, 2.5±0.2V
VCC=3.3±0.3V
VCC=5.0+0.5V
TA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
-40
MAX
5.5
UNIT
V
V
0.35* VCC
0.7
0.8
0.3* VCC
5.5
VCC
-4
-8
-16
-24
-32
4
8
16
24
32
20
10
5
85
V
V
V
mA
mA
ns/V
°C
3 of 7
QW-R502-559.a
U74LVC1G18
„
Preliminary
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
High
SYMBOL
VOH
Output Voltage
Low
Input Leakage Current
(A or S inputs)
OFF-state Current
High-impedance state Current
Quiescent Supply Current
VOL
II(LEAK)
IOFF
IOZ
ICC
Additional quiescent Supply
Current
Δ ICC
Input Capacitance
Output Capacitance
CIN
COUT
„
TEST CONDITIONS
MIN
IOH = -100 μA, VCC = 1.65V to 5.5V VCC -0.1
IOH = -4 mA, VCC = 1.65V
1.2
IOH = -8 mA, VCC = 2.3V
1.9
IOH = -16 mA, VCC = 3V
2.4
IOH = -24 mA, VCC = 3V
2.3
IOH = -32 mA, VCC = 4.5V
3.8
IOL = 100 μA, VCC = 1.65V to 5.5V
IOL = 4 mA, VCC = 1.65V
IOL = 8 mA, VCC = 2.3V
IOL = 16 mA, VCC = 3V
IOL = 24 mA, VCC = 3V
IOL = 32 mA, VCC = 4.5V
VIN = 5.5V or GND,
VCC = 0 to 5.5V
VIN or VO = 5.5V, VCC = 0V
VO = 0 to 5.5V, VCC = 3.6V
VIN = 5.5V or GND, IOUT = 0, VCC =
1.65V to 5.5V
One input at VCC – 0.6V;
other inputs at VCC or GND;
VCC=3V to 5.5V
VIN = VCC or GND, VCC=3.3V
VOUT = VCC or GND, VCC=3.3V
TYP
MAX
UNIT
V
0.1
0.45
0.3
0.4
0.55
0.55
V
±5
μA
±10
10
μA
μA
10
μA
500
μA
4
6
pF
pF
SWITCHING CHARACTERISTICS (TA =25°C)
PARAMETER
SYMBOL
Propagation delay
from input A to output Y
tPLH
tPHL
(tpd)
Propagation delay
from input A to output Y
tPLH
tPHL
(tpd)
Propagation delay
from input S to output Y
tPZL
tPZH
(ten)
Propagation delay
from input S to output Y
tPLZ
tPHZ
(tdis)
„
CMOS IC
TEST CONDITIONS
VCC=1.8±0.15V, CL=15pF, RL=1MΩ
VCC=2.5±0.20V, CL=15pF, RL=1MΩ
VCC=3.3±0.30V, CL=15pF, RL=1MΩ
VCC=5.0±0.50V, CL=15pF, RL=1MΩ
VCC=1.8±0.15V, CL=30pF, RL=1KΩ
VCC=2.5±0.20V, CL=30pF, RL=500Ω
VCC=3.3±0.30V, CL=50pF, RL=500Ω
VCC=5.0±0.50V, CL=50pF, RL=500Ω
VCC=1.8±0.15V, CL=30pF, RL=1KΩ
VCC=2.5±0.20V, CL=30pF, RL=500Ω
VCC=3.3±0.30V, CL=50pF, RL=500Ω
VCC=5.0±0.50V, CL=50pF, RL=500Ω
VCC=1.8±0.15V, CL=30pF, RL=1KΩ
VCC=2.5±0.20V, CL=30pF, RL=500Ω
VCC=3.3±0.30V, CL=50pF, RL=500Ω
VCC=5.0±0.50V, CL=50pF, RL=500Ω
MIN
2.3
1.1
1.1
0.8
3.5
1.7
1.5
0.7
3.6
1.7
1.5
0.9
1.9
1
1.1
0.5
MAX UNIT
8.4
4.2
3.4
2.7
ns
9.3
5
4.2
3.2
10.2
5.6
ns
4.6
3.4
12.7
5.3
ns
4.9
3.3
OPERATING CHARACTERISTICS (TA =25°C)
PARAMETER
Power Dissipation Capacitance
SYMBOL
Cpd
TEST CONDITIONS
VCC = 1.8V, f=10MHz
VCC = 2.5V, f=10MHz
VCC = 3.3V, f=10MHz
VCC = 5.0V, f=10MHz
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP
17
17
18
21
UNIT
pF
4 of 7
QW-R502-559.a
U74LVC1G18
„
Preliminary
CMOS IC
TEST CIRCUIT AND WAVEFORMS
RL
V LOAD
S1
Open
From output
GND
RL
CL
TEST CIRCUIT
Inputs
TEST
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
S1
Open
VLOAD
GND
tr, tf
≤2ns
≤2ns
≤2.5ns
≤2.5ns
VM
VLOAD
CL
RL
VΔ
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VIN
VCC
VCC
3V
VCC
VCC/2
VCC/2
1.5V
VCC/2
2*VCC
2*VCC
6V
2*VCC
15pF
15pF
15pF
15pF
1MΩ
1MΩ
1MΩ
1MΩ
0.15V
0.15V
0.3V
0.3V
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VCC
VCC
3V
VCC
≤2ns
≤2ns
≤2.5ns
≤2.5ns
VCC/2
VCC/2
1.5V
VCC/2
2*VCC
2*VCC
6V
2*VCC
30pF
30pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
0.15V
0.15V
0.3V
0.3V
VCC
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 7
QW-R502-559.a
U74LVC1G18
„
Preliminary
CMOS IC
TEST CIRCUIT AND WAVEFORMS(Cont.)
VIN
Input
VM
VM
tPLH
tPHL
0V
VOH
Output
VM
VM
VOL
tPLH
tPHL
VOH
VM
Output
VM
VOL
VIN
Input
VM
VM
tPLZ
tPZH
0V
VLOAD/2
Output
S1 at VLOAD
VM
tPHZ
tPZH
Output
S1 at GND
VOL
VOH
VM
0V
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 7
QW-R502-559.a
U74LVC1G18
Preliminary
CMOS IC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
7 of 7
QW-R502-559.a