www.osram.com LED STAR MR16 20 36° 827 GU5.3 Product description Product Offering Type reference Wattage CCT MR16 20 36° 4,5W 2700K lm CRI 230lm >80 • Compact mains voltage LED reflector lamp in MR16 shape • GU5,3 base for easy replacement • Equipped with high-efficiency patented LEDs, quality assured • Shockproof and vibration-proof 1. Key Features and Benefits • LED MR16 lamp as replacement for Decostar 51 20W lamp • Voltage: 12V • GU5,3 base • Warm white color (2700K) • conform to 1194/2012 EU • reduces energy consumption > 80% • Energy Class A • shock-proof and vibration-proof • 15,000 hours lifetime • Non dimmable1 • UV and NIR radiation free • Mercury free • 3 years Osram Guarantee2 1 2 See www.osram.com/dim See www.osram.com/guarantee GL MK, Edition February 2013 subject to alteration 1 3 2. Common Characteristics Average lifetime4 Switching cycles Casing material Starting time (30s on, 30s off) 15,000h >100,000 metal Mercury max. Base Type Length Diameter 0.0mg GU5,3 46mm 50mm 3. Characteristic Range Type reference 50g <0.5s Tc temperature max.5 Power factor <1s 0.68 Nominal current (230V/50Hz) 60°C 570 Beam angle 36° 3 Wattage Luminous flux MR16 20 36° Weight Warm up time for 60% light 4,5W 230lm Luminous intensity 600cd Correlated colour temperature 2700 SDCM CRI >6 >80 4. Mounting information Tc 3 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning pos ition and at rated voltage. To achieve a full lifetime a good heat exchange for the electronic components is required. 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) 5. Disposal information WEEE-lamps can be returned at specific collection points. LED lamps have to be disposed as special waste. GL MK, Edition February 2013 subject to alteration 2 6. Application Information Applications • hotels • restaurant • commercial areas • residentials • art galleries and museum • office space Application Notes 1. Suitable for indoor application. 2. For outdoor applications and operation in damp locations special approved fixture are required. 3. Input voltage: AC: 12V 4. Operating temperature range between -20°C and 40°C 7. Cost savings: example Reference product description Similar halogen product Watts saved MR16 20 DECOSTAR 51 20W 15,5W Cost saved after 2 year Cost saved after 5 years 3€ Cost saved after 15 years 15€ 51€ Based on the assumption of 2.7hours/day on and an energy cost of 0.21€/kWh 8. Ordering Guide Type reference LED STAR MR16 20 36° Product Number – 1pcs Product Number – 1 shipping unit Number of pcs / ship. unit 4052899910362 4052899910461 6 9. Lamp conformity 2004/108/EC Electromagnetic compatibility (EMC) 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems IEC/TR 62471-2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety EN 55015 Limits and methods of measurement of radio disturbance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluctuations, flicker in public low voltage supply systems EN61547 Electromagnetic compatibility immunity requirements GL MK, Edition February 2013 subject to alteration 3