AOS Semiconductor Product Reliability Report AOT440, rev A Plastic Encapsulated Device ALPHA & OMEGA Semiconductor, Inc www.aosmd.com 1 This AOS product reliability report summarizes the qualification result for AOT440. Accelerated environmental tests are performed on a specific sample size, and then followed by electrical test at end point. Review of final electrical test result confirms that AOT440 passes AOS quality and reliability requirements. The released product will be categorized by the process family and be routine monitored for continuously improving the product quality. Table of Contents: I. II. III. IV. Product Description Package and Die information Reliability Stress Test Summary and Results Reliability Evaluation I. Product Description: TM The AOT440 is fabricated with SDMOS trench technology that combines excellent RDS(ON) with low gate charge & low Qrr.The result is outstanding efficiency with controlled switching behavior. This universal technology is well suited for PWM, load switching and general purpose applications. Details refer to the datasheet. II. Die / Package Information: Process Package Type Lead Frame Die Attach Bonding Mold Material Moisture Level AOT440 Standard sub-micron 40V N-Channel MOSFET TO220 Bare Cu Soft solder Al wire Epoxy resin with silica filler Up to Level 1 2 III. Reliability Stress Test Summary and Results Test Item Test Condition Time Point Total Sample size* Number of Failures Reference Standard MSL Precondition 168hr 85°c/85%RH + 3 cycle reflow@260°c (MSL 1) - 2772 pcs 0 JESD22-A113 HTGB Temp = 150°c , Vgs=100% of Vgsmax 168 / 500 / 1000 hrs 693 pcs 0 JESD22-A108 HTRB Temp = 150°c , Vds=80% of Vdsmax 168 / 500 / 1000 hrs 693 pcs 0 JESD22-A108 HAST 130 °c , 85%RH, 33.3 psi, Vds = 80% of Vdsmax 96 hrs 924 pcs 0 JESD22-A110 Pressure Pot 121°c , 29.7psi, RH=100% 96 hrs 924 pcs 0 JESD22-A102 Temperature Cycle -65°c to 150°c , air to air, 250 / 500 cycles 924 pcs 0 JESD22-A104 *Note: The reliability data presents total of available generic data up to the published date. IV. Reliability Evaluation FIT rate (per billion): 4.57 MTTF = 24953 years The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in sample size. Failure Rate Determination is based on JEDEC Standard JESD 85. FIT means one failure per billion hours. 2 9 Failure Rate = Chi x 10 / [2 (N) (H) (Af)] = 4.57 9 MTTF = 10 / FIT = 24953 years Chi²= Chi Squared Distribution, determined by the number of failures and confidence interval N = Total Number of units from burn-in tests H = Duration of burn-in testing Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C) Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s)] Acceleration Factor ratio list: Af 55 deg C 70 deg C 85 deg C 100 deg C 115 deg C 130 deg C 150 deg C 259 87 32 13 5.64 2.59 1 Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16 Tj u =The use junction temperature in degree (Kelvin), K = C+273.16 k = Boltzmann’s constant, 8.617164 X 10-5eV / K 3