Datasheet

UNISONIC TECHNOLOGIES CO., LTD
UT3403
Power MOSFET
-2.6 Amps, 30 Volts
P-CHANNEL POWER MOSFET

DESCRIPTION
The UTC UT3403 is P-channel enhancement mode Power
MOSFET, designed with high density cell, with fast switching speed,
low on-resistance, excellent thermal and electrical capabilities and
operation with low gate voltages.
This device is suitable for use as a load switch or in PWM
applications.

SYMBOL
3.Drain
2.Gate
1.Source

ORDERING INFORMATION
Ordering Number
Note:

UT3403G-AE2-R
UT3403G-AE3-R
Pin Assignment: G: Gate
D: Drain
Package
SOT-23-3
SOT-23
Pin Assignment
1
2
3
S
G
D
S
G
D
Packing
Tape Reel
Tape Reel
S: Source
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-145.E
UT3403

Power MOSFET
ABSOLUTE MAXIMUM RATINGS (TA = 25°С, unless otherwise specified)
PARAMETER
SYMBOL
RATING
UNITS
Drain-Source Voltage
VDSS
-30
V
Gate-Source Voltage
VGSS
± 12
V
Continuous Drain Current (Note 3)
ID
-2.6
A
Pulsed Drain Current (Note 1)
IDM
-20
A
Power Dissipation(Note 3)
PD
1.4
W
Junction Temperature
TJ
+150
°С
Storage Temperature
TSTG
-55 ~ +150
°С
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL DATA
PARAMETER
Junction to Ambient (Note 3)

SYMBOL
θJA
MIN
TYP
100
MAX
125
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise noted)
PARAMETER
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage
Drain-Source Leakage Current
Gate-Source Leakage Current
ON CHARACTERISTICS
Gate Threshold Voltage
Drain-Source On-State Resistance (Note 2)
SYMBOL
TEST CONDITIONS
BVDSS
IDSS
IGSS
ID=-250μA, VGS=0V
VDS=-24V, VGS=0V
VDS=0V, VGS=±12V
-30
VGS(TH)
VDS=VGS, ID=-250μA
VGS=-10V, ID=-2.6A
VGS=-4.5V, ID=-2A
VGS=-2.5V, ID=-1A
-0.6
RDS(ON)
DYNAMIC PARAMETERS
Input Capacitance
CISS
VGS =0V, VDS =-15V, f=1MHz
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
SWITCHING PARAMETERS
Turn-ON Delay Time (Note 2)
tD(ON)
Turn-ON Rise Time
tR
VGS=-10V, VDS=-15V
RL=6Ω, RG =3Ω
Turn-OFF Delay Time
tD(OFF)
Turn-OFF Fall Time
tF
Total Gate Charge (Note 2)
QG
VGS=-4.5V, VDS=-15V,
Gate-Source Charge
QGS
ID=-2.5A
Gate-Drain Charge
QGD
SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS
Drain-Source Diode Forward Voltage(Note2)
VSD
VGS=0V, IS=-1A
Maximum Continuous Drain-Source Diode
IS
Forward Current
Reverse Recovery Time
tRR
IF=-2.5A, dI/dt=100A/μs
Reverse Recovery Charge
QRR
Notes: 1. Pulse width limited by TJ(MAX)
2. Pulse width ≤300us, duty cycle ≤2%.
3. Surface mounted on 1 in2 copper pad of FR4 board
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
MAX UNIT
-1
±100
V
µA
nA
-1
102
128
187
-1.4
130
180
260
V
mΩ
mΩ
mΩ
409
55
42
500
pF
pF
pF
5.3
4.4
31.5
8
4.4
0.8
1.32
8
9
45
16
5.3
ns
ns
ns
ns
nC
nC
nC
-0.85
-1
V
-2
A
19
12
ns
nC
15.8
8
2 of 5
QW-R502-145.E
UT3403
Drain Current,-ID (A)
TYPICAL CHARACTERISTICS
Drain Current,-ID (A)

Power MOSFET
On-Resistance vs. Drain Current and
Gate Voltage
250
VGS=-2.5V
500
200
Capacitance (pF)
Drain to Source OnResistance,RDS(ON) (mΩ)
Capacitance Characteristics
600
150
VGS=-4.5V
CISS
400
300
200
100
COSS
100
VGS=-10V
CRSS
0
50
0
1
2
3
4
5
6
0
Drain Current,-ID (A)
On-Resistance vs. Gate-Source Voltage
1.0E+01
ID=-2A
250
Reverse Drain Current,-IS (A)
Drain to Source OnResistance,RDS(ON) (mΩ)
300
200
125℃
150
100
25℃
50
0
0
2
4
6
8
Gate to Source Voltage,-VGS (V)
10
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5
10
15
20
25
Drain to Source Voltage,-VDS (V)
30
Body-Diode Characteristics
1.0E+00
125℃
1.0E-01
1.0E-02
25℃
1.0E-03
1.0E-04
1.0E-05
1.0E-06
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Body Diode Forward Voltage,-VSD (V)
3 of 5
QW-R502-145.E
UT3403
TYPICAL CHARACTERISTICS(Cont.)
Power (W)
Gate to Source Voltage,-VGS (V)

Power MOSFET
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 5
QW-R502-145.E