UNISONIC TECHNOLOGIES CO., LTD U74ACT86 CMOS IC QUAD EXCLUSIVE OR GATE DESCRIPTION The U74ACT86 consists of four EXCLUSIVE OR GATE it provides the function Y=A⊕B, the device is designed to interface directly High Speed CMOS systems with TTL, NMOS and CMOS output voltage levels. FEATURES * Operation voltage range: 4.5~5.5V * Low power dissipation: ICC=2μA(Max) * High noise immunity * Compatible with TTL output ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74ACT86L-D14-T U74ACT86G-D14-T U74ACT86G-S14-R U74ACT86G-P14-R Package Packing DIP-14 SOP-14 TSSOP-14 Tube Tape Reel Tape Reel MARKING DIP-14 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd SOP-14 / TSSOP-14 1 of 4 QW-R126-007.C U74ACT86 CMOS IC PIN CONFIGURATION 1A 1 14 VCC 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y FUNCTION TABLE (each gate) INPUT A L L H H B L H L H OUTPUT Y L H H L LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R126-007.C U74ACT86 CMOS IC ABSOLUTE MAXIMUM RATINGS (unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~7 V Input Voltage VIN -0.5~ VCC+0.5 V DC Output Voltage VOUT -0.5~VCC+0.5 V Input Clamp Current (ViN<0) IIK ±20 mA Output Clamp Current (VOUT<0) IOK ±20 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±200 mA Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Input Transition Rise or Fall Rate Operating Temperature High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Input Capacitance UNIT V V V ns/V °C SYMBOL TEST CONDITIONS VIH VCC=4.5V~5.5V, VOUT=0.1V or VCC- 0.1V VIL VCC=4.5V~5.5V, VOUT=0.1V or VCC- 0.1V VCC=4.5V, IOH=-50μA VCC=5.5V, IOH=-50μA VOH VCC=4.5V, IOH=-24mA VCC=5.5V, IOH=-24mA VCC=4.5V, IOL=50μA VCC=5.5V, IOL=50μA VOL VCC=4.5V, IOL=24mA VCC=5.5V, IOL=24mA II(LEAK) VCC=5.5V, VIN=5.5V or GND IQ VCC=5.5V, VIN=VCC or GND, IOUT=0 VCC=5.5V, VIN=3.4V;other input at VCC or IQ GND; IOUT=0 CIN VCC=5.0V, VIN=VCC or GND MIN 2.0 4.4 5.4 3.86 4.86 TYP 1.5 1.5 4.49 5.49 MAX 0.001 0.001 0.1 0.1 0.36 0.36 ±0.1 2 0.8 UNIT V V V V V V V V V V μA μA 0.6 mA 5 pF DYNAMIC CHARACTERISTIC (input tR = tF =3ns, TA=25°C) PARAMETER Propagation Delay Time RATING 4.5 ~ 5.5 0 ~ VCC 0 ~ VCC 8 -55 ~ +125 STATIC CHARACTERISTICS PARAMETER High-Level Input Voltage Low-Level Input Voltage SYMBOL VCC VIN VOUT tR, tF TA SYMBOL TEST CONDITION tPLH tPHL VCC =5.0V±0.5V, CL =50pF, RL =500Ω MIN 1.5 TYP 5.0 MAX 9.5 UNIT ns MIN TYP 30 MAX UNIT pF OPERATING CHARACTERISTIC PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITION Cpd VCC =5.0V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R126-007.C U74ACT86 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. 3ns 3ns 90% 2.5 V Input 10% 5V 2.5 V GND tPLH tPHL 1/2 * VCC 1/2 * VCC Output Output 1/2 * VCC tPHL 1/2 * VCC tPLH UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R126-007.C