TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specification Approval Sheet Product Name: SAW Filter 1237 MHz SMD 3.0X3.0 mm(BW=40MHz) TST Parts No.: TA0836B Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Anne Chen Approved by: Bob Chau Date: 01, 27, 2016 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the change TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1237 MHz MODEL NO.:TA0836B REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 18 dBm 2. DC Voltage : 3V 3. Operating Temperature: -50°C to +60°C 4. Storage Temperature: -50°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device Unit Center Frequency Fc MHz Min. - Type. 1237 Max. - Note - Min. Insertion loss IL dB - 2.4 3 - Bandwidth @ -1 dB MHz - 46 - - Bandwidth @ -1.5 dB MHz 40 51 - - Attenuation (Reference level from 0 dB) Fc - 60 MHz dB 30 60 - - Fc - 50 MHz dB 20 50 - - Fc + 50 MHz dB 20 30 - - Fc + 60 MHz dB 30 38 - - Ppm/℃ - -36 - - Temperature Coefficient of Frequency C. MEASUREMENT CIRCUIT: HP Network analyzer B SAW Filter E A,C,D,F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 D.OUTLINE DRAWING: A Z △ □ B : Input E : Output A,C,D,F : Ground Unit : mm △ : Year Code (2010->0, …, 2019->9) □ : Date Code (Follow the table from planner each year) E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) 2.TAPE DIMENSION AZ △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6