TA1956A

TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Product Specifications Approval Sheet
Product Description: SAW Filter 265MHz SMD 5.0X7.0 mm (BW=8MHz)
TST Part No.: TA1956A
Customer Part No.:
Customer signature required
Company:
Division:
Approved by :
Date:
Checked by:
Anne Chen
Approved by:
Bob Chau
Date:
01, 04, 2016
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the change
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
FR-71S03-02
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
SAW Filter 265 MHz
MODEL NO.: TA1956A
REV. NO.:1
RoHS Compliant
Lead free
Lead-free soldering
A. MAXIMUM RATING:
1. Input Power Level: 10 dBm
2. DC voltage: 5 V
3. Operating Temperature: : -30°C to +85°C
4. Storage Temperature: -55°C to +85°C
Electrostatic Sensitive Device (ESD)
B. ELECTRICAL CHARACTERISTICS:
Item
Unit
MHz
Min.
-
Type.
265
Max.
-
Insertion Loss (261~269 MHz)
dB
-
2.4
4
Ripple (261~269 MHz)
dB
-
1.8
2.2
Center frequency, Fc
Absolute Attenuation:(Reference level from 0dB)
0.3 ~ 250
MHz
dB
33
36
-
290 ~ 350
MHz
dB
35
42
-
350 ~ 650
MHz
dB
25
28
-
Source impedance
Zs

-
50
-
Load impedance
ZL

-
50
-
C. MEASUREMENT CIRCUIT:
HP Network analyzer
IN
O UT
9

4
S AW Filter
 
1 ,2, 3, 5,6 ,7, 8, 10
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
- 2 -
D. Frequency Characteristics :
1. Wideband response
2. Narrowband response
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
- 3 -
E.OUTLINE DRAWING:
1956
T △ □
Marking name : 1956
△ : year code : See the table
□: Week Code. (Follow the table from planner each year)
Product Year Code
Year
Product Code
Pin configuration
# 9 Input
# 4 Output
2013
2017
2014
2018
2015
2019
2016
2020
A
a
A
a
# 10 Input ground
#5
Output ground
# 1,2,3,6,7,8 To be grounded
□ Data code:See the table
F. PCB Footprint:
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
- 4 -
G. PACKING:
1. Reel dimension
(Please refer to FR-75D10 for packing quantity)
2.TAPE DIMENSION
1208
956
TB
TA
Direction of Feed
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
- 5 -
H. RECOMMENDED REFLOW PROFILE :
1. Preheating shall be fixed at 150~180℃ for 60~90 seconds.
2. Ascending time to preheating temperature 150℃ shall be 30 seconds min.
3. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec).
4. Time : 2 times.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
- 6 -