Cable Output PMR www.vishay.com Vishay MCB Analog Displacement Sensors for Transportation Applications FEATURES • Conductive plastic potentiometer technology • Use in engine compartment • Travel: 240° • Sealed sheath outputs • Lever drive with return spring QUICK REFERENCE DATA Sensor type ROTATIONAL, conductive plastic Output type Output by cable Market appliance Dimensions • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Transportation 41 mm x 34 mm x 23.37 mm ELECTRICAL SPECIFICATIONS PARAMETER Total electrical travel 250° ± 3° Independent linearity ± 1.5 % Total resistance (Rn) 4 k ± 20 % Output smoothness < 0.1 % (NFC 93255) Power rating at +40 °C 0.5 W Power rating at +125 °C 0.05 W Wiper current limiting resistance (Rp) 1.7 k Recommended wiper current < 100 μA Maximum wiper current 15 mA for 1 min 100 Rn Recommended load impedance MECHANICAL SPECIFICATIONS PARAMETER Mechanical rotation 240° ± 3° Lever return torque at start of travel 1.5 N cm Lever return torque at end of travel 7.5 N cm Stop strength 60 N cm Lever return Clockwise Protection class IP 66 Mounting screw tightening torque 2.3 N m maximum PERFORMANCE PARAMETER Operating temperature range -40 °C to +125 °C Storage temperature range Vibrations -55 °C to +135 °C Severity 10 Hz to 2000 Hz, 10 mm or 50 g Life 5M cycles (on TET) Micro-movements (dither stroke) > 50M cycles Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 09-Sep-15 Document Number: 32517 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Cable Output PMR www.vishay.com Vishay MCB SAP PART NUMBERING GUIDELINES - PMR416 MODEL TYPE LEVER TYPE VALUE ANGLE LEADS PACKAGING PMR4 16 = cable output C = lever C 402 = 4K0 250 A = cable C = 20 pcs G = 100 pcs P = 500 pcs CONNECTIONS 5.9 mm ± 0.2 mm diameter cable outputs, 3 x 0.75 mm2, length 500 mm DIMENSIONS in millimeters 250° ± 3° Total electrical angle Lever on U/2 position 240° ± 3° mechanical angle Cable Ø 5.9 ± 0.2 3 x 0.75 mm2 9 + 0.2 0 1 ± 0.2 5° Ø 4. S.V Ø 23.37 ± 0.08 (centering) 3.2 22 ± 0.3 41 ± 0.2 25.2 ± 0.2 Clockwise spring lever direction 34 ± 0.1 M4 screw 0 Ø 10.7 12 3 + 0.2 5.9 11.8 17 ± 0.5 10 ± 0.2 35 ± 0.2 3.4 ± 0.15 9±1 12.6 ± 0.5 ELECTRICAL DIAGRAM OPTIONS (on request) Blue Black • Other electrical travel • Other total resistance Rotation • Other linearity Rp • No protection resistance (Rp) • Specific connections Maron Vs • Other lever Ve Revision: 09-Sep-15 Document Number: 32517 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000