For more information, please visit the product page. date 10/15/2012 page 1 of 4 SERIES: CFM 50 │ DESCRIPTION: DC AXIAL FAN FEATURES • • • • 50 x 50 mm frame high fan speed for greater air flow two ball bearing construction auto restart protection standard on all models RoHS operating voltage rated current input current input power (Vdc) (Vdc) max (A) max (A) max (W) auto restart tachometer signal rotation detector PWM control signal CFM-5010-03-10 5 4~5.75 0.21 0.28 1.4 x - - - CFM-5010-03-11 5 4~5.75 0.21 0.28 1.4 x - x - CFM-5010-03-20 5 4~5.75 0.21 0.28 1.4 x x - - CFM-5010-03-22 5 4~5.75 0.21 0.28 1.4 x x - x CFM-5010-13-10 12 6~13.8 0.11 0.14 1.68 x - - - CFM-5010-13-11 12 6~13.8 0.11 0.14 1.68 x - x - CFM-5010-13-20 12 6~13.8 0.11 0.14 1.68 x x - - CFM-5010-13-22 12 6~13.8 0.11 0.14 1.68 x x - x MODEL rated voltage fan protection PART NUMBER KEY CFM-5010-X3-XX-CXX Base Number Reserved for Custom Configurations Voltage Type 0 = 5 Vdc 1 = 12 Vdc Fan Speed 3 = high speed cui.com Fan Protection 10 = auto restart protection 11 = auto restart protection / rotation detector 20 = auto restart protection / tachometer signal 22 = auto restart protection / tachometer signal / PWM control signal For more information, please visit the product page. CUI Inc │ SERIES: CFM 50 │ DESCRIPTION: DC AXIAL FAN date 10/15/2012 │ page 2 of 4 SPECIFICATION parameter conditions/description min frame depth 5 V models 12 V models starting voltage at 25°C, power on/off rated speed at 25°C, after 10 minutes air flow at 0 mm H2O, see performance curve static pressure at 0 CFM, see performance curve 5,490 5 V models 12 V models at 500 Vdc between frame and positive terminal dielectric strength at 500 Vac, 60 Hz, 1 minute between frame and positive terminal life expectancy at 45°C, 15~65 RH operating temperature humidity range (Inch H2O) (mm H2O) 0.11 0.23 0.34 cui.com 0.45 MΩ 5 mA RH 1.00 15.00 dBA dBA 66 2.00 10.00 mmH2O 37.2 37.0 15 4.00 0.00 CFM CFM °C 5.00 5.00 RPM hours 6.00 0.00 0.00 6,710 70 3.00 0.00 6,100 70,000 0.09 0.05 Vdc Vdc -10 PERFORMANCE CURVE 0.14 mm 10 yes 0.19 10 3.5 5 36.0 36.0 insulation resistance of frame units mm 5.15 5 V models 12 V models at 1 m 0.24 max 50 16.07 16.07 noise RoHS typ 20.00 (CFM) 0.57 (CMM) For more information, please visit the product page. CUI Inc │ SERIES: CFM 50 │ DESCRIPTION: DC AXIAL FAN date 10/15/2012 │ page 3 of 4 MECHANICAL parameter conditions/description bearing system ball bearing min motor protection auto restart, polarity protection material UL94V-0 weight 5 V models 12 V models typ 20.7 18.4 MECHANICAL DRAWING units: mm (inches) ōŢţŦŭ cui.com max units g g For more information, please visit the product page. CUI Inc │ SERIES: CFM 50 │ DESCRIPTION: DC AXIAL FAN date 10/15/2012 │ page 4 of 4 REVISION HISTORY rev. 1.0 description date initial release 10/15/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.