Introduction General-purpose G3VM-@L/@FL/@GL MOS FET Relays Current-limiting Type High-load-voltage MOS FET Relays that protect themselves from overcurrents with a current-limiting protection function • Package: DIP 4-pin, DIP 8-pin or SOP 4-pin Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength • Contact form: 1a (SPST-NO) or 2a (DPST-NO) • Load voltage: 350 V • Current limit: 150 to 300 mA RoHS Compliant Note: The actual product is marked differently from the image shown here. ■Application Examples • Communication equipment • Industrial equipment • Test & Measurement equipment High-dielectricstrength ■Package ■Model Number Legend (Unit : mm, Average) DIP 8-pin DIP 4-pin SOP 4-pin PCB Terminals PCB Terminals G3V M- @ @ @ @ 1 2 3 4 Current-limiting 9.66 4.58 3.65 3.65 6.4 6.4 Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON Surface-mounting Terminals Surface-mounting Terminals Surface-mounting Terminals 3.65 2.1 3.65 2. Contact form 1 : 1a (SPST-NO) 3. Package G : SOP 4-pin with surface-mounting terminals 4. Additional functions L: Current limiting Note: The model number legend for the G3VM-2L/2FL/WL/WFL is different from the above legend. 3.9 9.66 4.58 1. Load Voltage 35 : 350 V 4.4 6.4 6.4 Note: The actual product is marked differently from the image shown here. ■Ordering Information Package Contact form G3VM-@L/@FL/@GL DIP4 1a (SPST-NO) DIP8 2a (DPST-NO) SOP4 1a (SPST-NO) Load voltage (peak value) * Continuous load current (peak value) * Stick packaging Model PCB Terminals G3VM-2L 350 V 120 mA G3VM-WL − Surface-mounting Terminals G3VM-2FL Tape packaging Minimum package quantity 100 pcs. Surface-mounting Terminals G3VM-2FL(TR) Minimum package quantity 1,500 pcs. G3VM-WFL 50 pcs. G3VM-WFL(TR) 1,500 pcs. G3VM-351GL 100 pcs. G3VM-351GL(TR) 2,500 pcs. * The AC peak and DC value are given for the load voltage and continuous load current. Note: To order tape packaging for Relays with surface-mounting terminals, add “(TR)” to the end of the model number. 136 Model MOS FET Relays Item Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Continuous load current (AC peak/DC) G3VM-2L G3VM-2FL G3VM-WL G3VM-WFL IF G3VM-351GL 50 Unit IFP 1 A ΔIF/°C -0.5 mA/°C VR 6 5 125 °C 350 V IO 120 mA ON current reduction rate ΔIO/°C -1.2 mA/°C Connection temperature TJ 125 °C VI-O Ambient operating temperature Ta -40 to +85 °C Tstg -55 to +125 °C With no icing or condensation − 260 °C 10 s Soldering temperature Vrms Ta ≥ 25°C Dielectric strength between I/O (See note 1.) Ambient storage temperature 1500 100 μs pulses, 100 pps Ta ≥ 25°C V TJ VOFF 2500 Measurement conditions mA AC for 1 min Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Output Load voltage (AC peak/DC) Symbol High-load-voltage Input LED forward current General-purpose ■Absolute Maximum Ratings (Ta = 25°C) Introduction G3VM-@L/@FL/@GL High-dielectricstrength Current-limiting Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-@L/@FL/@GL 137 MOS FET Relays Item G3VM-2L G3VM-2FL Symbol High-load-voltage LED forward voltage Input General-purpose ■Electrical Characteristics (Ta = 25°C) Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Output Introduction G3VM-@L/@FL/@GL VF G3VM-WL G3VM-WFL Minimum 1.0 Typical 1.15 Maximum 1.3 G3VM-351GL Unit Measurement conditions V IF=10 mA Reverse current IR Maximum 10 μA G3VM-2L/2FL/WL/WFL : VR=6 V G3VM-351GL : VR=5 V Capacitance between terminals CT Typical 30 pF V=0, f=1 MHz Trigger LED forward current IFT Typical 1 mA IO=120 mA Release LED forward current IFC mA G3VM-2L/2FL/WL/WFL : IOFF=10 μA G3VM-351GL : IOFF=100 μA Maximum resistance with output ON RON Current leakage when the relay is open ILEAK Capacitance between terminals COFF Limit current ILIM Capacitance between I/O terminals CI-O Insulation resistance between I/O terminals RI-O Turn-ON time tON Turn-OFF time tOFF Maximum 3 Minimum 0.1 Typical 22 15 Maximum 35 Maximum 1.0 Typical 40 70 Minimum 150 Maximum 300 Typical 0.8 Minimum 1000 Typical 108 − Typical IF=5 mA, IO=120 mA VOFF=350 V pF V=0, f=1 MHz mA IF=5 mA, VDD=5 V, t=5 ms pF f=1 MHz, VS=0 V MΩ VI-O=500 VDC, ROH≤60% ms IF=5 mA, RL=200 Ω, VDD=2 V (See note 2.) 0.3 Maximum 1.0 − Typical Ω μA 0.1 High-dielectricstrength Maximum 1.0 Note: 2. Turn-ON and Turn-OFF Times G3VM-2L/2FL/351GL IF 1 4 2 3 RL G3VM-WL/WFL VDD VOUT IF 1(3) 8(6) RL 2(4) 7(5) VDD VOUT Current-limiting IF Low-output-capacitance and Low-ON-resistance VOUT 10% 90% t ON t OFF ■Recommended Operating Conditions Small and Highload-voltage For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute Maximum Ratings and Electrical Characteristics. Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions. Item G3VM-2L G3VM-2FL Symbol Certified Models with Standards Certification VDD Maximum G3VM-WL G3VM-WFL Load voltage (AC peak/DC) 280 Minimum 5 Operating LED forward current IF Typical 7.5 Maximum 25 Continuous load current (AC peak/DC) IO Maximum 100 Ambient operating temperature Ta Minimum -20 DIP SOP SSOP USOP VSON Maximum 65 ■Spacing and Insulation G3VM-@L/@FL/@GL Item Minimum G3VM-@L/@FL G3VM-@GL Creepage distances 7.0 2.5 Clearance distances 7.0 2.5 Internal isolation thickness 0.4 0.1 138 Unit mm G3VM-351GL Unit V mA A °C MOS FET Relays ● LED forward current vs. Ambient temperature ● Continuous load current vs. Ambient temperature 30 20 10 LED forward current IF (mA) 40 120 100 80 60 100 Ta=25°C G3VM-351GL 10 1 40 G3VM-2L/2FL 20 G3VM-WL/WFL 0 0 20 40 60 80 100 -40 -20 0 20 IO - VON 100 IFT - Ta On-state resistance RON (Ω) 0 25 IO=120mA, IF=5mA, t<1s G3VM-351GL 20 15 G3VM-2L/2FL G3VM-WL/WFL 10 5 -1 -0.5 0 0.5 1 1.5 0 -40 2 -20 0 20 80 1.5 G3VM-351GL 1 G3VM-2L/2FL G3VM-WL/WFL 0.5 0 100 -40 -20 0 20 G3VM-2L/2FL G3VM-WL/WFL G3VM-351GL 1 80 100 ILEAK - Ta VDD=20V, RL=200Ω, IF=5mA G3VM-351GL tON G3VM-2L/2FL G3VM-WL/WFL tOFF 0.1 tOFF G3VM-351GL 100 VOFF=350V G3VM-2L/2FL G3VM-WL/WFL 10 Small and Highload-voltage tOFF 0.1 G3VM-351GL 1 Certified Models with Standards Certification Turn ON, Turn OFF time tON, tOFF (ms) VDD=20V, RL=200Ω, Ta=25°C 60 ● Current leakage vs. Ambient temperature tON, tOFF - Ta 1 40 Ambient temperature Ta (°C) Low-output-capacitance and Low-ON-resistance ● Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - IF Turn ON, Turn OFF time tON, tOFF (ms) 60 IO=120mA t<1s Ambient temperature Ta (°C) On-state voltage VON (V) ● Turn ON, Turn OFF time vs. LED forward current 40 2 Current-limiting -100 -1.5 1.4 ● Trigger LED forward current vs. Ambient temperature -50 -2 1.2 LED forward voltage VF (V) RON - Ta Ta=25°C IF=5mA 50 -150 1 High-dielectricstrength Continuous load current IO (mA) 80 ● On-state resistance vs. Ambient temperature 150 100 60 Ambient temperature Ta (°C) Ambient temperature Ta (°C) ● Continuous load current vs. On-state voltage 40 Trigger LED forward current IFT (mA) -20 0.1 0.8 Current leakage ILEAK (nA) 0 -40 tON 0.01 1 10 100 LED forward current IF (mA) 0.01 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) 0.1 0 20 40 60 Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Continuous load current IO (mA) 50 IF - VF 140 High-load-voltage LED forward current IF (mA) ● LED forward current vs. LED forward voltage IO - Ta IF - Ta 60 General-purpose ■Engineering Data Introduction G3VM-@L/@FL/@GL 80 Ambient temperature Ta (°C) DIP SOP SSOP USOP VSON G3VM-@L/@FL/@GL 139 Introduction G3VM-@L/@FL/@GL MOS FET Relays General-purpose ■Appearance / Terminal Arrangement / Internal Connections ●Appearance ●Terminal Arrangement/Internal Connections (Top View) DIP (Dual Inline Package) High-load-voltage DIP 4-pin Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength 4 3 1 2 Mold pin mark (See note 3.) OMRON logo Model name (See note 2.) Pin 1 mark 932 LOT.NO. DIP 8-pin 8 7 6 5 1 2 3 4 Mold pin mark (See note 3.) OMRON logo Model name (See note 2.) 932 Pin 1 mark LOT.NO. SOP (Small Outline Package) SOP 4-pin 4 3 1 2 Mold pin mark (See note 3.) High-dielectricstrength OMRON logo Model name (See note 2.) LOT.NO. 932 Pin 1 mark Current-limiting Note: 1. The actual product is marked differently from the image shown here. Note: 2. “G3VM” does not appear in the model number on the Relay. Note: 3. The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■Dimensions (Unit: mm) Low-output-capacitance and Low-ON-resistance G3VM-2L G3VM-2FL PCB Terminals Surface-mounting Terminals Weight: 0.4 g PCB Dimensions (BOTTOM VIEW) Weight: 0.4 g 2.54 Four, 0.8-dia. holes (0.61) 2.54 4.58±0.25 4.58±0.25 Small and Highload-voltage 6.4±0.25 6.4±0.25 Actual Mounting Pad Dimensions 7.62±0.25 0.8±0.25 Certified Models with Standards Certification (Recommended Value, TOP VIEW) 3.65+0.15 -0.25 3.65+0.15 -0.25 1.2±0.15 0.5±0.1 2.54±0.25 4.0+0.25 -0.2 1.0 min. 0.25+ 2.5 min. (0.61) (1.52) (1.52) 7.62±0.25 1.2±0.15 7.85 to 8.80 1.0 min. 2.54 8.3 to 8.8 10.0 max. 2.54±0.25 1.3 DIP Note: The actual product is marked differently from the image shown here. SOP G3VM-WFL SSOP G3VM-WL USOP PCB Terminals Surface-mounting Terminals VSON Weight: 0.54 g Weight: 0.54 g 1.5 PCB Dimensions (BOTTOM VIEW) 2.54 Eight, 0.8 dia. holes G3VM-@L/@FL/@GL (0.61) 2.54 9.66±0.25 9.66±0.25 6.4±0.25 Actual Mounting Pad Dimensions 7.62±0.25 0.8±0.25 3.65+0.15 -0.25 0.25+0.1 -0.05 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 3.65+0.15 -0.25 1.2±0.15 2.54±0.25 (Recommended Value, TOP VIEW) 2.54 4.0+0.25 -0.2 1.0 min. 1.0 min. 7.85 to 8.80 Note: The actual product is marked differently from the image shown here. 140 (0.61) (1.52) (1.52) 6.4±0.25 7.62±0.25 8.3 to 8.8 10.0 max. 1.3 1.5 MOS FET Relays G3VM-351GL Surface-mounting Terminals (Recommended Value, TOP VIEW) 4.4±0.25 3.9±0.2 2.1 max. 6 to 6.3 0.15 0.1±0.1 2.54±0.25 1.2 Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength 0.4±0.1 0.6±0.3 7.0±0.4 0.8 2.54 Note: The actual product is marked differently from the image shown here. ■Approved Standards UL recognized Model G3VM-2L G3VM-2FL G3VM-WL G3VM-WFL Approved Standards Contact form File No. 1a (SPST-NO) UL (recognized) High-load-voltage Actual Mounting Pad Dimensions Weight: 0.1 g General-purpose ■Dimensions (Unit: mm) Introduction G3VM-@L/@FL/@GL E80555 2a (DPST-NO) High-dielectricstrength ■Safety Precautions • Refer to the Common Precautions for All MOS FET Relays for precautions that apply to all MOS FET Relays. Current-limiting Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-@L/@FL/@GL 141