Introduction MOS FET Relays SSOP, Low-output-capacitance and Low-ON-resistance Type (with Low C × R) High-load-voltage MOS FET Relays in SSOP packages that achieve a low C × R • Load voltage: 20 V • G3VM-21LR: Low C × R = 5 pF·Ω, COFF (standard) = 1 pF, RON (standard) = 5 Ω • G3VM-21LR1: Low C × R = 4 pF·Ω, COFF (standard) = 5 pF, RON (standard) = 0.8 Ω • G3VM-21LR11: Low C × R = 7.2 pF·Ω, COFF (standard) = 40 pF, RON (standard) = 0.18 Ω RoHS Compliant Note: The actual product is marked differently from the image shown here. ■Application Examples • Communication equipment • Test & Measurement equipment • Data loggers ■Package ■Model Number Legend (Unit : mm, Average) G3V M- @ @ @ @ @ SSOP 4-pin 5 2. Contact form 1 : 1a (SPST-NO) High-dielectricstrength 1 2 3 4 1. Load Voltage 2 : 20 V 1.8 3. Package L : SSOP 4-pin 3.8 2.04 Current-limiting 5. Other informations When specifications overlap, serial code is added in the recorded order. 4. Additional functions R: Low ON resistance Note: The actual product is marked differently from the image shown here. ■Ordering Information SSOP4 Contact form Terminals Load voltage (peak value) * Surface-mounting 1a Terminals (SPST-NO) Tape cut packaging Continuous load current (peak value) * 20 V Tape packaging Minimum package quantity Model G3VM-21LR 200 mA G3VM-21LR10 450 mA G3VM-21LR1 900 mA G3VM-21LR11 Minimum package quantity G3VM-21LR(TR05) G3VM-21LR10(TR05) 1 pc. G3VM-21LR1(TR05) 500 pcs. Small and Highload-voltage 160 mA Model G3VM-21LR11(TR05) * The AC peak and DC value are given for the load voltage and continuous load current. Note: To order tape packaging for Relays with surface-mounting terminals, add "(TR05)" to the end of the model number. Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. Item Input LED forward current reduction rate G3VM-21LR10 G3VM-21LR1 IF 50 30 50 ΔIF/°C G3VM-21LR -0.5 -0.3 G3VM-21LR11 50 -0.5 Unit VR 5 V Connection temperature TJ 125 °C Continuous load current (AC peak/DC) Pulse ON current 20 IO 160 200 ΔIO/°C -1.6 -2.0 lop 480 600 Ta ≥ 25°C DIP SOP SSOP USOP VSON V 450 900 mA -4.5 -12 mA/°C 1,350 2,700 mA G3VM-21LR11 : Ta ≥ 50°C Others : Ta ≥25°C t=100 ms, Duty=1/10 Connection temperature TJ 125 °C Dielectric strength between I/O (See note 1.) VI-O 1500 Vrms Ambient operating temperature Ta -20 to +85 °C Tstg -40 to +125 °C With no icing or condensation − 260 °C 10 s Ambient storage temperature Soldering temperature AC for 1 min Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. 147 G3VM-21LR@ ON current reduction rate VOFF Measurement conditions mA mA/°C LED reverse voltage Load voltage (AC peak/DC) Output Symbol Certified Models with Standards Certification ■Absolute Maximum Ratings (Ta = 25°C) LED forward current Low-output-capacitance and Low-ON-resistance Package Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength • G3VM-21LR10: Low C × R = 2.4 pF·Ω, COFF (standard) = 0.8 pF, RON (standard) = 3 Ω • Semiconductor test equipment General-purpose G3VM-21LR@ Item High-load-voltage Input General-purpose Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength High-dielectricstrength Current-limiting Symbol G3VM-21LR G3VM-21LR10 G3VM-21LR1 G3VM-21LR11 Minimum 1.0 1.15 1.0 Typical 1.15 1.35 1.15 Maximum 1.3 1.45 Unit V Measurement conditions G3VM-21LR10 : IF=5 mA G3VM-21LR/21LR1/21LR11 : IF=10 mA LED forward voltage VF Reverse current IR Maximum Capacitance between terminals CT Typical Trigger LED forward current IFT Maximum 4 3 4 3 mA IO=100 mA Release LED forward current IFC Minimum 0.2 0.1 0.2 0.1 mA IOFF=10 μA Typical 5 3 0.8 0.18 Maximum 8 5 1.2 0.22 Typical − 0.01 − Maximum 1 0.2 1 Maximum resistance with output ON 1.3 10 15 70 15 RON Current leakage when the relay is open ILEAK Capacitance between terminals COFF Capacitance between I/O terminals CI-O Insulation resistance between I/O terminals RI-O Turn-ON time tON Turn-OFF time tOFF Typical 1 0.8 5 40 Maximum 2.5 1.1 12 − Typical 0.8 0.3 0.8 0.3 Minimum 1000 Typical 108 0.06 − 0.2 Maximum 0.5 0.2 0.5 Typical 0.12 − Maximum 0.5 0.2 Typical μA VR=5 V pF V=0, f=1 MHz Ω G3VM-21LR/21LR1 : IF=5 mA, IO=Continuous load current ratings, t=10 ms G3VM-21LR10/21LR11 : IF=5 mA, IO=Continuous load current ratings, t<1 s nA G3VM-21LR/21LR1: VOFF=20 V, Ta=50°C G3VM-21LR10/21LR11 : VOFF=20 V pF G3VM-21LR10 : V=0, f=100 MHz G3VM-21LR/21LR1/21LR11 : V=0, f=100 MHz, t<1 s pF f=1 MHz, VS=0 V MΩ VI-O=500 VDC, ROH≤60% ms IF=5 mA, RL=200 Ω, VDD=10 V (See note 2.) 0.3 2 0.2 0.5 1 Note: 2. Turn-ON and Turn-OFF Times IF Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON MOS FET Relays ■Electrical Characteristics (Ta = 25°C) Output Introduction G3VM-21LR@ 1 4 2 3 RL VDD VOUT IF VOUT 10% 90% t ON t OFF ■Recommended Operating Conditions For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute Maximum Ratings and Electrical Characteristics. Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions. Item Symbol Load voltage (AC peak/DC) VDD Operating LED forward current IF Continuous load current (AC peak/DC) IO Ambient operating temperature Ta G3VM-21LR G3VM-21LR@ Item Minimum 2.5 Clearance distances 2.5 Internal isolation thickness 0.1 148 G3VM-21LR1 G3VM-21LR11 20 10 − 10 − 30 20 30 20 Maximum 160 200 450 900 Minimum Maximum Unit mm -20 60 Unit V Minimum Maximum ■Spacing and Insulation Creepage distances G3VM-21LR10 Maximum 65 mA °C MOS FET Relays G3VM-21LR G3VM-21LR1 G3VM-21LR11 40 G3VM-21LR10 30 20 G3VM-21LR11 800 600 G3VM-21LR1 400 (Average value) 100 Ta=25°C G3VM-21LR G3VM-21LR1 G3VM-21LR11 10 G3VM-21LR10 1 G3VM-21LR10 200 10 IF - VF (Maximum value) 1000 G3VM-21LR 0 20 40 60 80 0 -20 100 0.1 0 20 Ambient temperature Ta (°C) (Average value) 1000 800 600 Ta=25°C IF=5mA G3VM-21LR1 400 200 0 G3VM-21LR -200 -400 6 5 RON - Ta G3VM-21LR 4 G3VM-21LR10 3 0.3 (Average value) IO=900mA IF=5mA, t<1s 0.2 0.1 G3VM-21LR1 G3VM-21LR10 1 G3VM-21LR11 -800 G3VM-21LR11 G3VM-21LR10 20 40 60 80 100 Ambient temperature Ta (°C) 80 0 -40 100 tON, tOFF - IF tOFF 100 G3VM-21LR1 tON 10 1 1 tON 10 20 40 60 80 100 G3VM-21LR10/21LR11 G3VM-21LR1 VDD=10V RL=200Ω Ta=25°C 0 Ambient temperature Ta (°C) tON, tOFF - IF (Average value) 1000 G3VM-21LR -20 100 LED forward current IF (mA) (Average value) 10000 VDD=10V RL=200Ω Ta=25°C 1000 G3VM-21LR11 tOFF tOFF 100 G3VM-21LR10 tON 10 tON 1 1 10 100 LED forward current IF (mA) Certified Models with Standards Certification 1 60 ● Turn ON, Turn OFF time vs. LED forward current G3VM-21LR/21LR1 Turn ON, Turn OFF time tON, tOFF (μs) 2 40 Small and Highload-voltage G3VM-21LR 3 20 Ambient temperature Ta (°C) (Average value) G3VM-21LR10 : IO=200mA The others : IO=100mA, t<1s G3VM-21LR1 0 0 Low-output-capacitance and Low-ON-resistance IFT - Ta 4 0 -20 0 0.2 0.4 0.6 0.8 On-state voltage VON (V) ● Trigger LED forward current vs. Ambient temperature Trigger LED forward current IFT (mA) G3VM-21LR11 (Average value) IO=Continuous Load Current Ratings IF=5mA, t<1s 7 1.4 2 -1000 -0.8 -0.6 -0.4 -0.2 0 -20 8 1.2 Current-limiting -600 RON - Ta 1 High-dielectricstrength Continuous load current IO (mA) IO - VON 0.8 LED forward voltage VF (V) ● On-state resistance vs. Ambient temperature G3VM-21LR/21LR10/21LR1 On-state resistance RON (Ω) ● Continuous load current vs. On-state voltage 40 60 80 100 Ambient temperature Ta (°C) On-state resistance RON (Ω) -20 Turn ON, Turn OFF time tON, tOFF (μs) 0 Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Continuous load current IO (mA) 50 IO - Ta (Maximum value) 60 ● LED forward current vs. LED forward voltage High-load-voltage LED forward current IF (mA) IF - Ta ● Continuous load current vs. Ambient temperature LED forward current IF (mA) ● LED forward current vs. Ambient temperature General-purpose ■Engineering Data Introduction G3VM-21LR@ DIP SOP SSOP USOP VSON G3VM-21LR@ 149 MOS FET Relays tON G3VM-21LR1 tON G3VM-21LR 10 -20 0 20 (Average value) 1000 VDD=10V RL=200Ω IF=5mA G3VM-21LR11 tOFF 100 10 0 20 40 60 80 100 ILEAK - VOFF High-dielectricstrength G3VM-21LR1 6 ILEAK - VOFF (Average value) 8 4 Current-limiting 0 Ta=25°C 100 80 60 G3VM-21LR 20 0 5 10 15 20 Load voltage (V) Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-21LR@ 150 20 0 0 5 40 60 80 100 Ambient temperature Ta (°C) COFF - VOFF (Average value) 120 40 2 0 ● Output terminal capacitance vs. Load voltage G3VM-21LR/21LR1/21LR11 G3VM-21LR11 Ta=25°C 100 tON ● Current leakage vs. Load voltage 10 VOFF=20V Ambient temperature Ta (°C) G3VM-21LR/21LR1 (Average value) 1000 tOFF G3VM-21LR10 10 -20 40 60 80 100 Ambient temperature Ta (°C) tON ILEAK - Ta Output terminal capacitance COFF/COFF(0V) Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength tOFF tOFF Turn ON, Turn OFF time tON, tOFF (μs) G3VM-21LR G3VM-21LR1 100 tON, tOFF - Ta (Average value) Current leakage ILEAK (pA) High-load-voltage tON, tOFF - Ta 1000 VDD=10V RL=200Ω IF=10mA ● Current leakage vs. Ambient temperature G3VM-21LR10 G3VM-21LR10/21LR11 Current leakage ILEAK (pA) ● Turn ON, Turn OFF time vs. Ambient temperature G3VM-21LR/21LR1 Turn ON, Turn OFF time tON, tOFF (μs) General-purpose ■Engineering Data Current leakage ILEAK (pA) Introduction G3VM-21LR@ 10 15 20 Load voltage (V) (Average value) 1 Ta=25°C G3VM-21LR 0.8 G3VM-21LR1 0.6 G3VM-21LR11 0.4 0.2 0 0 5 10 15 20 Load voltage (V) MOS FET Relays SSOP 4-pin * Actual model name marking for each model Model 416 Model name * OMRON mark Pin 1 logo 612 LOT.NO. Marking G3VM-21LR 210 G3VM-21LR10 21A 211 G3VM-21LR11 21B Note: 1. The actual product is marked differently from the image shown here. Note: 2. “G3VM” does not appear in the model number on the Relay. ■Dimensions (Unit: mm) 416 Surface-mounting Terminals 612 Weight: 0.03 g Actual Mounting Pad Dimensions 4.2 (Recommended Value, TOP VIEW) 1.9 1.4 dia. 0.95 3.73 3.65 0.15 2.04 0.8 1.27 0.2 3.8 High-dielectricstrength (0.3) 1.27 1.8 (0.46) Unless otherwise specified, the dimensional tolerance is ± 0.1 mm. Current-limiting Note: The actual product is marked differently from the image shown here. Low-output-capacitance and Low-ON-resistance ■Approved Standards UL recognized Approved Standards Contact form File No. UL (recognized) 1a (SPST-NO) E80555 Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength G3VM-21LR1 High-load-voltage ●Terminal Arrangement/ Internal Connections (Top View) ●Appearance SSOP (Shrink Small Outline Package) General-purpose ■Appearance / Terminal Arrangement / Internal Connections Introduction G3VM-21LR@ Small and Highload-voltage ■Safety Precautions • Refer to the Common Precautions for All MOS FET Relays for precautions that apply to all MOS FET Relays. Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-21LR@ 151