P42WG-xxxxE/Z2:1(H35)LF PM7-SERIES Rev.03-2011 10 Watt 2:1 Wide Input 2” x 1” Case 1.5 - 3.5 kV DC I/O Isolation Regulated Output Single and Dual Output Continuous Short Circuit Prot. Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] The PM7 series P42WG-xxxxE/Z2:1(H35)LF is a family of cost effective 10W, single & dual output DC-DC converters with a wide input range of 2:1. These converters are encapsulated in nickel coated brass 2”x1” case with high performance features: 1500VDC up to 3500VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation, high efficiency operation and output voltage accuracy of ±1% maximum. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ Start up Time (Nom. Vin and constant resistive load) 2:1 Wide Input (See Table) Pi Type 35 mA pk-pk 20mS, typ. Output Specifications Voltage Accuracy Short Circuit Protection Over Current Protection Line Regulation Load Regulation (0% - 100%) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 1% Indefinite (Automatic Recovery) 140% of max. Iout ± 0.5% ± 0.5% (Single) ± 1.0% (Dual) 100 mV pk-pk ± 0.02% / °C General Specifications Efficiency I/O Isolation Voltage (3 sec.) I/O Isolation Capacitance I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) Safety Standars (designed to meet) See Table 1500 VDC (3000 VDC optional)* 500 pF, typ. 1000 M Ohm 200 kHz, typ. 95% rel H > 1.121 Mhrs IEC 60950-1 Physical Specifications Case Material Potting Material Weight Nickel Coated Brass Epoxy (UL94V-0 rated) ~ 30g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +85°C (ambient) 100°C -40 to +125°C Free Air Convection (10mm distance required) Soldering 260°C, max. (1.5mm from case 10s.) PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 Selection Guide Single Output A) A) ) d (m mA) ad (mA d (m ( a a o ) d o L ² C ) o oa ll L n. (uF) (VD VDC nt No L nt Full L t Mi t Fu d ( e ) n n a g e e e o a % r r rre rre y( lta g or L Volt C ur Cur t Cu put Cu ienc t Vo acit put put pu t In p u Inpu In O ut O ut O ut Effic C ap Order # SINGLE OUTPUT P42WG-123R3E2:1LF P42WG-1205E2:1LF P42WG-127R2E2:1LF P42WG-1209E2:1LF P42WG-1212E2:1LF P42WG-1215E2:1LF P42WG-1218E2:1LF P42WG-1224E2:1LF P42WG-1248E2:1LF P42WG-243R3E2:1LF P42WG-2405E2:1LF P42WG-247R2E2:1LF P42WG-2409E2:1LF P42WG-2412E2:1LF P42WG-2415E2:1LF P42WG-2418E2:1LF P42WG-2424E2:1LF P42WG-483R3E2:1LF P42WG-4805E2:1LF P42WG-487R2E2:1LF P42WG-4809E2:1LF P42WG-4812E2:1LF P42WG-4815E2:1LF P42WG-4818E2:1LF P42WG-4824E2:1LF 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 30 30 30 30 30 30 30 30 42 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 705 1016 1004 1004 992 992 980 980 1028 352 508 502 496 496 490 490 484 176 251 251 248 248 248 245 245 3.3 5 7.2 9 12 15 18 24 48 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 200 200 138 111 83 66 55 41 20 200 200 138 111 83 66 55 41 200 200 138 111 83 66 55 41 2000 2000 1388 1111 833 666 555 416 208 2000 2000 1388 1111 833 666 555 416 2000 2000 1388 1111 833 666 555 416 78 82 83 83 84 84 85 85 81 78 82 83 84 84 85 85 86 78 83 83 84 84 84 85 86 2200 2200 1000 1000 680 470 470 330 220 2200 2200 1000 1000 680 470 470 330 2200 2200 1000 1000 680 470 470 330 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “H35” before LF! Example: P42WG-2409E2:1H35LF for 3.5kV Notes: PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Dual Output A) A) ) d (m mA) ad (mA d (m ( a a o ) o d L ² C ) o oa ll L n. (uF) (VD VDC nt No L nt Full L t Fu t Mi d ( e n ) n a g e e e o a r % r rre y( rre lta g or L Cur C ur Volt t Cu put Cu ienc t Vo acit pu t put put In p u Inpu In O ut O ut O ut Effic C ap Order # DUAL OUTPUT P42WG-123R3Z2:1LF P42WG-1205Z2:1LF P42WG-127R2Z2:1LF P42WG-1209Z2:1LF P42WG-1212Z2:1LF P42WG-1215Z2:1LF P42WG-1218Z2:1LF P42WG-1224Z2:1LF P42WG-243R3Z2:1LF P42WG-2405Z2:1LF P42WG-247R2Z2:1LF P42WG-2409Z2:1LF P42WG-2412Z2:1LF P42WG-2415Z2:1LF P42WG-2418Z2:1LF P42WG-2424Z2:1LF P42WG-483R3Z2:1LF P42WG-4805Z2:1LF P42WG-487R2Z2:1LF P42WG-4809Z2:1LF P42WG-4812Z2:1LF P42WG-4815Z2:1LF P42WG-4818Z2:1LF P42WG-4824Z2:1LF 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 1068 1016 1004 992 992 980 980 980 352 508 502 502 496 496 490 490 176 254 248 248 245 245 242 242 ± 3.3 ±5 ± 7.2 ±9 ± 12 ± 15 ± 18 ± 24 ± 3.3 ±5 ± 7.2 ±9 ± 12 ± 15 ± 18 ± 24 ± 3.3 ±5 ± 7.2 ±9 ± 12 ± 15 ± 18 ± 24 ± 100 ± 100 ± 69 ± 55 ± 41 ± 33 ± 27 ± 20 ± 100 ± 100 ± 69 ± 55 ± 41 ± 33 ± 27 ± 20 ± 100 ± 100 ± 69 ± 55 ± 41 ± 33 ± 27 ± 20 ± 1000 ± 1000 ± 694 ± 555 ± 416 ± 333 ± 277 ± 208 ± 1000 ± 1000 ± 694 ± 555 ± 416 ± 333 ± 277 ± 208 ± 1000 ± 1000 ± 694 ± 555 ± 416 ± 333 ± 277 ± 208 78 82 83 84 84 85 85 85 78 82 83 83 84 84 85 85 78 82 84 84 85 85 86 86 ± 1000 ± 1000 ± 680 ± 470 ± 470 ± 330 ± 220 ± 220 ± 1000 ± 1000 ± 680 ± 470 ± 470 ± 330 ± 220 ± 220 ± 1000 ± 1000 ± 680 ± 470 ± 470 ± 330 ± 220 ± 220 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “H35” before LF! Example: P42WG-2409Z2:1H35LF for 3.5kV Notes: PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 10.16 (0.40) COM +Vout (if Dual) DIA. 1.00 (0.04) 15.24 (0.60) -Vout 3 20.32 (0.80) Datecode Vin: Vout: Iout: 4 Bottom View 1 Vin + 25.40 (1.00) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 5 2 15.24 (0.60) 50.80 (2.00) PEAK Modelcode - 10.16 10.16 2.54 (0.40) (0.40) (0.10) 2.54 (0.10) 5.08 (0.20) min. 10.16 5.08 10.16 (0.40) (0.20) (0.40) 2" x 1" – METAL CASE # 1 2 3 4 5 PIN CONNECTIONS SINGLE DUAL +Vin +Vin - Vin - Vin +Vout +Vout Omitted Common - Vout - Vout same Pinning for 3.5 kV Isolation App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - Suggest adding input external filter (C1 , C2 , L ) to meet conducted emissions (EN 55022 class A). Radiated Emissions ESD RS EMC SPECIFICATIONS EN 55022 CLASS A FCC 47CFR Part 15/A CLASS A IEC 61000-4-2 Perf. Criteria B IEC 61000-4-3 Perf. Criteria A PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4