P22TG-xxxxE/Z2:1(H35)LF PMD-SERIES Rev.11-2008 5 Watt 2:1 Wide Input Reg. Single and Dual Output 1.5 to 3.5 kV DC I/O Isolation DIP24 Case Continuous Short Circuit Prot. Full SMD Technology Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] The PMD 5W series P22TG-xxxxE/Z2:1(H35)LF is a family of cost effective 5W single & dual output DC-DC converters. These converters are encapsulated in miniature DIP24 plastic case. High performance features: 1500VDC up to 3500VDC input/output isolation, continuous short circuit protection with automatic restart and tight line / load regulation, high efficiency operation, output voltage accuracy of ±1% maximum and a wide input range of 2:1 All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ 2:1 Wide Input Pi Type 35 mA pk-pk Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 1% Indefinite (automatic recovery) ± 0.5% ± 0.5% (3.3 / ± 3.3Vout Models: ± 1.5%) 60 mV pk-pk ± 0.02% / °C General Specifications Efficiency I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency (typical) Humidity Reliability Calculated MTBF (MIL-HDBK-217F) See Table 1500 VDC (3500 VDC optional)* 470 pF, typ. 1000 MOhm 266 kHz 95% rel H > 1.121 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic (UL94V-0 rated) Epoxy (UL94V-0 rated) ~ 13.5g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +85°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PMD-Series – P22TG-xxxxE/Z2:1(H35)LF – Single and Dual Output – DIP24 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 Selection Guide Single/Dual Output ) ) m A) m A) (mA ad (mA ad ( ad ( o ) d o L a L C ) o . L F²) D C in Lo ull d (u (VD No Full e (V nt F ) nt M a t t g e e e o n n a % r r g t ( r r L l e e rr y rr lta or Cu Cu Vo t Cu put Cu ienc t Vo acit pu t put put In p u Inpu In O ut O ut O ut Effic C ap Order # SINGLE OUTPUT P22TG-123R3E2:1LF P22TG-1205E2:1LF P22TG-1209E2:1LF P22TG-1212E2:1LF P22TG-1215E2:1LF P22TG-1224E2:1LF P22TG-243R3E2:1LF P22TG-2405E2:1LF P22TG-2409E2:1LF P22TG-2412E2:1LF P22TG-2415E2:1LF P22TG-2424E2:1LF P22TG-483R3E2:1LF P22TG-4805E2:1LF P22TG-4809E2:1LF P22TG-4812E2:1LF P22TG-4815E2:1LF P22TG-4824E2:1LF 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 30 30 30 30 30 30 20 20 20 20 20 20 12 12 12 12 12 12 490 542 534 514 520 520 239 261 254 261 255 255 120 131 127 131 126 126 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 9 12 15 24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1300 1000 555 417 333 208 1300 1000 555 417 333 208 1300 1000 555 417 333 208 73 77 78 81 80 80 75 80 82 80 82 82 75 80 82 80 83 83 1000 1000 680 330 220 68 1000 1000 680 330 220 68 1000 1000 680 330 220 68 DUAL OUTPUT P22TG-123R3Z2:1LF P22TG-1205Z2:1LF P22TG-1209Z2:1LF P22TG-1212Z2:1LF P22TG-1215Z2:1LF P22TG-1224Z2:1LF P22TG-243R3Z2:1LF P22TG-2405Z2:1LF P22TG-2409Z2:1LF P22TG-2412Z2:1LF P22TG-2415Z2:1LF P22TG-2424Z2:1LF P22TG-483R3Z2:1LF P22TG-4805Z2:1LF P22TG-4809Z2:1LF P22TG-4812Z2:1LF P22TG-4815Z2:1LF P22TG-4824Z2:1LF 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 30 30 30 30 30 30 20 20 20 20 20 20 12 12 12 12 12 12 565 542 520 520 528 520 275 267 251 261 261 261 142 132 132 131 131 131 ± 3.3 ±5 ±9 ± 12 ± 15 ± 24 ± 3.3 ±5 ±9 ± 12 ± 15 ± 24 ± 3.3 ±5 ±9 ± 12 ± 15 ± 24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ± 750 ± 500 ± 278 ± 208 ± 167 ± 104 ± 750 ± 500 ± 278 ± 208 ± 167 ± 104 ± 750 ± 500 ± 278 ± 208 ± 167 ± 104 73 77 80 80 79 80 75 78 83 80 80 80 73 79 79 80 80 80 ± 680 ± 330 ± 220 ± 100 ± 47 ± 33 ± 680 ± 330 ± 220 ± 100 ± 47 ± 33 ± 680 ± 330 ± 220 ± 100 ± 47 ± 33 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “H35” before LF! Example: P22TG-1205Z2:1H35LF for 3.5kV PMD-Series – P22TG-xxxxE/Z2:1(H35)LF – Single and Dual Output – DIP24 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/3 0.25 (0.01) 20.32 (0.80) 15.24 (0.60) Package / Pinning / Derating PIN CONNECTIONS # SINGLE DUAL 2 - Vin - Vin 3 - Vin - Vin 9 Omitted Common 11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin others Omitted Omitted Same Pinning for 3.5kV Isolation App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by nominal Vin and constant resistor load. PMD-Series – P22TG-xxxxE/Z2:1(H35)LF – Single and Dual Output – DIP24 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/3