P44WG-xxxxE/Z2:1(H35)LF PM7-SERIES Rev.03-2011 12 Watt 2:1 Wide Input 2” x 1” Case 1.5 - 3.5 kV DC I/O Isolation Regulated Output Single and Dual Output Continuous Short Circuit Prot. Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] The PM7 series P44WG-xxxxE/Z2:1(H35)LF is a family of cost effective 12W, single & dual output DC-DC converters with a wide input range of 2:1. These converters are encapsulated in nickel coated brass 2”x1” case with high performance features: 1500VDC up to 3500VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation, high efficiency operation and output voltage accuracy of ±1% maximum. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ Start up Time (Nom. Vin and constant resistive load) 2:1 Wide Input (See Table) Capacitors 35 mA pk-pk 20mS, typ. Output Specifications Voltage Accuracy Short Circuit Protection Over Current Protection Line Regulation Load Regulation (0% - 100%) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 1% Indefinite (Automatic Recovery) 140% of max. Iout ± 0.5% ± 0.5% (Single) ± 1.0% (Dual) 100 mV pk-pk ± 0.02% / °C General Specifications Efficiency I/O Isolation Voltage (3 sec.) I/O Isolation Capacitance I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) Safety Standard (designed to meet) See Table 1500 VDC (3000 VDC optional)* 470 pF, typ. 1000 M Ohm 200 kHz, typ. 95% rel H > 1.121 Mhrs IEC 60950-1 Physical Specifications Case Material Potting Material Weight Nickel Coated Brass Epoxy (UL94V-0 rated) ~ 30g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +85°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PM7-Series – P44WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 Selection Guide Single Output A) A) ) d (m mA) ad (mA d (m a ( a o ) o d L ² L C ) o . oa (uF) (VD Mi n Full VDC nt No L nt Full L oad age %) rent ren t ge ( t r ( r L l e e a r r u u t o r r r y l V C C ienc t Cu put Cu t Vo acito put put put Inpu Inpu In Out Out Out Effic Cap Order # SINGLE OUTPUT P44WG-123R3E2:1LF P44WG-1205E2:1LF P44WG-127R2E2:1LF P44WG-1209E2:1LF P44WG-1212E2:1LF P44WG-1215E2:1LF P44WG-1218E2:1LF P44WG-1224E2:1LF P44WG-243R3E2:1LF P44WG-2405E2:1LF P44WG-247R2E2:1LF P44WG-2409E2:1LF P44WG-2412E2:1LF P44WG-2415E2:1LF P44WG-2418E2:1LF P44WG-2424E2:1LF P44WG-483R3E2:1LF P44WG-4805E2:1LF P44WG-487R2E2:1LF P44WG-4809E2:1LF P44WG-4812E2:1LF P44WG-4815E2:1LF P44WG-4818E2:1LF P44WG-4824E2:1LF 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 835 1219 1204 1204 1190 1190 1176 1176 417 609 602 595 595 588 588 581 208 301 301 297 297 297 294 294 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 240 240 166 133 100 80 66 50 240 240 166 133 100 80 66 50 240 240 166 133 100 80 66 50 2400 2400 1666 1333 1000 800 666 500 2400 2400 1666 1333 1000 800 666 500 2400 2400 1666 1333 1000 800 666 500 79 82 83 83 84 84 85 85 79 82 83 84 84 85 85 86 79 83 83 84 84 84 85 86 3300 3300 2200 1000 1000 680 470 470 3300 3300 2200 1000 1000 680 470 470 3300 3300 2200 1000 1000 680 470 470 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “H35” before LF! Example: P44WG-2409E2:1H35LF for 3.5kV Notes: PM7-Series – P44WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Dual Output A) ) ) m A) d (m ad ( (mA ad (mA a o ) d o L a L C ll Lo F)² n. D Lo t Mi t Fu d (u ( No Full e (V ) n n a t g t e e e o n a n % r r g t L ( r r l e e r y rr rr l ta Vo Cu Cu ienc t Vo t Cu put Cu acito put put put Inpu Inpu In Out Out Out Effic Cap ) VDC Order # DUAL OUTPUT P44WG-123R3Z2:1LF P44WG-1205Z2:1LF P44WG-127R2Z2:1LF P44WG-1209Z2:1LF P44WG-1212Z2:1LF P44WG-1215Z2:1LF P44WG-1218Z2:1LF P44WG-1224Z2:1LF P44WG-243R3Z2:1LF P44WG-2405Z2:1LF P44WG-247R2Z2:1LF P44WG-2409Z2:1LF P44WG-2412Z2:1LF P44WG-2415Z2:1LF P44WG-2418Z2:1LF P44WG-2424Z2:1LF P44WG-483R3Z2:1LF P44WG-4805Z2:1LF P44WG-487R2Z2:1LF P44WG-4809Z2:1LF P44WG-4812Z2:1LF P44WG-4815Z2:1LF P44WG-4818Z2:1LF P44WG-4824Z2:1LF 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 835 1219 1204 1190 1190 1176 1176 1176 417 609 602 602 595 595 588 588 208 304 297 297 294 294 290 290 ± 3.3 ±5 ± 7.2 ±9 ± 12 ± 15 ± 18 ± 24 ± 3.3 ±5 ± 7.2 ±9 ± 12 ± 15 ± 18 ± 24 ± 3.3 ±5 ± 7.2 ±9 ± 12 ± 15 ± 18 ± 24 ± 120 ± 120 ± 83 ± 66 ± 50 ± 40 ± 33 ± 25 ± 120 ± 120 ± 83 ± 66 ± 50 ± 40 ± 33 ± 25 ± 120 ± 120 ± 83 ± 66 ± 50 ± 40 ± 33 ± 25 ± 1200 ± 1200 ± 833 ± 666 ± 500 ± 400 ± 333 ± 250 ± 1200 ± 1200 ± 833 ± 666 ± 500 ± 400 ± 333 ± 250 ± 1200 ± 1200 ± 833 ± 666 ± 500 ± 400 ± 333 ± 250 79 82 83 84 84 85 85 85 79 82 83 83 84 84 85 85 79 82 84 84 85 85 86 86 ± 1000 ± 1000 ± 680 ± 470 ± 470 ± 330 ± 220 ± 220 ± 1000 ± 1000 ± 680 ± 470 ± 470 ± 330 ± 220 ± 220 ± 1000 ± 1000 ± 680 ± 470 ± 470 ± 330 ± 220 ± 220 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “H35” before LF! Example: P44WG-2409Z2:1H35LF for 3.5kV Notes: PM7-Series – P44WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 10.16 (0.40) COM +Vout (if Dual) DIA. 1.00 (0.04) 15.24 (0.60) -Vout 3 20.32 (0.80) Datecode Vin: Vout: Iout: 4 Bottom View 1 Vin + 25.40 (1.00) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 5 2 15.24 (0.60) 50.80 (2.00) PEAK Modelcode - 10.16 10.16 2.54 (0.40) (0.40) (0.10) 2.54 (0.10) 5.08 (0.20) min. 10.16 5.08 10.16 (0.40) (0.20) (0.40) 2" x 1" – METAL CASE # 1 2 3 4 5 PIN CONNECTIONS SINGLE DUAL +Vin +Vin - Vin - Vin +Vout +Vout Omitted Common - Vout - Vout same Pinning for 3.5 kV Isolation App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - Suggest adding input external filter ( C1 , C2 , L ) to meet conducted emissions (En55022 class A). Radiated Emissions ESD RS EMC SPECIFICATIONS EN 55022 CLASS A FCC 47CFR Part 15/A CLASS A IEC 61000-4-2 Perf. Criteria B IEC 61000-4-3 Perf. Criteria A PM7-Series – P44WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4