P44WG-xxxxE/Z4:1LF Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] PM7W-SERIES Rev.11-2008 12 Watt 4:1 Ultra Wide Input 2” x 1” Case 1.5 kV DC I/O Isolation Regulated Output Single and Dual Output Continuous Short Circuit Prot. The PM7W series P44WG-xxxxE/Z4:1LF is a family of cost effective 12 W, single & dual output DC-DC converters with a ultra wide input range of 4:1. These converters are encapsulated in nickel coated brass 2”x1” case with high performance features: 1500VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation, high efficiency operation and output voltage accuracy of ±1% maximum. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ Start up Time (Nom. Vin and constant resistive load) 4:1 Ultra Wide Input (See Table) PI Type 35 mA pk-pk 20mS, typ. Output Specifications Voltage Accuracy Short Circuit Protection Over Current Protection Line Regulation Load Regulation (10% - 100%) Cross Regulation³ Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 1% Indefinite (Automatic Recovery) 140% of max. Iout ± 0.5% ± 0.5% (10% - 100% load) ± 1.0% (< 10% load) ± 5% 75 mV pk-pk ± 0.02% / °C General Specifications Efficiency I/O Isolation Voltage (3 sec.) I/O Isolation Capacitance I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) See Table 1500 VDC 1200 pF, typ. 1000 M Ohm 300 kHz, typ. 95% rel H > 1.121 Mhrs Physical Specifications Case Material Potting Material Weight Nickel Coated Brass Epoxy (UL94V-0 rated) ~ 30g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +71°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PM7W-Series – P44WG-xxxxE/Z4:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 Selection Guide Single and Dual Output Order # ) A) ) ) (mA d (m mA ad (mA d a ( a o ) o d ² C) in. L Loa ull L uF) VDC ll L o (VD nt M nt F ) ad ( ge ( t No rent Fu e e e o a n r r % g t r r ( L l e a r r r lt or cy Vo Cu Cu t Vo t Cu put Cu acit put put put cien Inpu Inpu In Out Out Out Effi Cap SINGLE OUTPUT P44WG-243R3E4:1LF P44WG-2405E4:1LF P44WG-247R2E4:1LF P44WG-2409E4:1LF P44WG-2412E4:1LF P44WG-2415E4:1LF P44WG-483R3E4:1LF P44WG-4805E4:1LF P44WG-487R2E4:1LF P44WG-4809E4:1LF P44WG-4812E4:1LF P44WG-4815E4:1LF 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 25 25 25 25 25 25 20 20 20 20 20 20 412 609 602 602 588 588 206 304 301 301 294 294 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 0 0 0 0 0 0 0 0 0 0 0 0 2400 2400 1666 1333 1000 800 2400 2400 1666 1333 1000 800 80 82 83 83 85 85 80 82 83 83 85 85 3300 3300 1000 680 680 470 3300 3300 1000 680 680 470 DUAL OUTPUT P44WG-2405Z4:1LF P44WG-247R2Z4:1LF P44WG-2409Z4:1LF P44WG-2412Z4:1LF P44WG-2415Z4:1LF P44WG-4805Z4:1LF P44WG-487R2Z4:1LF P44WG-4809Z4:1LF P44WG-4812Z4:1LF P44WG-4815Z4:1LF 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 25 25 25 25 25 20 20 20 20 20 609 602 602 588 588 304 301 301 294 294 ±5 ± 7.2 ±9 ± 12 ± 15 ±5 ± 7.2 ±9 ± 12 ± 15 0 0 0 0 0 0 0 0 0 0 ± 1200 ± 833 ± 666 ± 500 ± 400 ± 1200 ± 833 ± 666 ± 500 ± 400 82 83 83 85 85 82 83 83 85 85 ± 2200 ± 470 ± 470 ± 470 ± 330 ± 2200 ± 470 ± 470 ± 470 ± 330 If you need other specifications, please enquire. Notes: PM7W-Series – P44WG-xxxxE/Z4:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/3 Package / Pinning / Derating 10.16 (0.40) COM +Vout (if Dual) DIA. 1.00 (0.04) 15.24 (0.60) -Vout 3 20.32 (0.80) Datecode Vin: Vout: Iout: 4 5 Bottom View 1 2 15.24 (0.60) 50.80 (2.00) PEAK Modelcode Vin - 10.16 10.16 2.54 (0.40) (0.40) (0.10) 2.54 (0.10) + 25.40 (1.00) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 5.08 (0.20) min. 10.16 5.08 10.16 (0.40) (0.20) (0.40) 2" x 1" – METAL CASE # 1 2 3 4 5 PIN CONNECTIONS SINGLE DUAL +Vin +Vin - Vin - Vin +Vout +Vout Omitted Common - Vout - Vout App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. ³ = One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 4 = Input filter components (C1, C2, L) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module. All leads should be minimized to decrease radiated noise. EMC SPECIFICATIONS Radiated Emissions EN 55022 Conducted Emissions EN 55022 ESD IEC 61000-4-2 RS IEC 61000-4-3 EFT IEC 61000-4-4 CS IEC 61000-4-6 PFMF IEC 61000-4-8 CLASS A CLASS A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria A PM7W-Series – P44WG-xxxxE/Z4:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/3