PEN4-xxxxE/Z4:1LF Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] PEN-SERIES Rev.09-2009 3-4 Watt 4:1 Ultra Wide Input Reg. Single and Dual Output DIP24 Metal Case 1.5 kV DC I/O Isolation Continuous Short Circuit Prot. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ 4:1 Ultra Wide Input Pi Type 35 mA pk-pk Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 1% Indefinite (automatic recovery) ± 0.5% ± 0.5% / ± 1.5% (only 3.3 / ±3.3 Vout Models) 60 mV pk-pk ± 0.02% / °C General Specifications Efficiency I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency (typical) Humidity Reliability Calculated MTBF (MIL-HDBK-217F) See Table 1500 VDC 500 pF, typ. 1000 MOhm 266 kHz, typ. 95% rel H > 1.121 Mhrs Physical Specifications Case Material Potting Material Weight Nickel Coated Copper Epoxy (UL94V-0 rated) ~ 17g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +85°C (ambient) 100°C -40 to +125°C Free Air Convection (10mm distance required) Soldering 260°C, max. (1.5mm from case 10s.) PEN-Series – PEN4-xxxxE/Z4:1LF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 Selection Guide Single/Dual Output t Wat A) d (m a ) o ² C ) ll L (uF) VDC age (VD ent Fu oad r %) ge ( t r ( L l a u t o r y l o V C ienc t Vo a c it pu t put Inpu O ut Out Effic Ca p SINGLE OUTPUT PEN4-243R3E4:1LF PEN4-2405E4:1LF PEN4-247R2E4:1LF PEN4-2412E4:1LF PEN4-2415E4:1LF PEN4-483R3E4:1LF PEN4-4805E4:1LF PEN4-487R2E4:1LF PEN4-4812E4:1LF PEN4-4815E4:1LF 3 3.3 4 4 4 3 3.3 4 4 4 9 - 36 9 - 36 9 - 36 9 - 36 9 - 36 18 - 72 18 - 72 18 - 72 18 - 72 18 - 72 3.3 5 7.2 12 15 3.3 5 7.2 12 15 900 660 555 330 265 900 660 555 330 265 77 81 79 83 83 78 82 82 85 85 680 100 100 100 220 680 1000 470 1000 47 DUAL OUTPUT PEN4-243R3Z4:1LF PEN4-2405Z4:1LF PEN4-247R2Z4:1LF PEN4-2412Z4:1LF PEN4-2415Z4:1LF PEN4-483R3Z4:1LF PEN4-4805Z4:1LF PEN4-487R2Z4:1LF PEN4-4812Z4:1LF PEN4-4815Z4:1LF 4 3 4 4 4 4 3 4 4 4 9 - 36 9 - 36 9 - 36 9 - 36 9 - 36 18 - 72 18 - 72 18 - 72 18 - 72 18 - 72 ± 3.3 ±5 ± 7.2 ± 12 ± 15 ± 3.3 ±5 ± 7.2 ± 12 ± 15 ± 606 ± 300 ± 277 ± 165 ± 130 ± 606 ± 300 ± 277 ± 165 ± 130 75 80 79 83 83 78 82 79 85 85 ± 470 ± 220 ± 47 ± 47 ± 10 ± 680 ± 220 ± 47 ± 100 ± 100 Order # If you need other specifications, please enquire. PEN-Series – PEN4-xxxxE/Z4:1LF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/3 Package / Pinning / Derating 27.94 (1.10) 1 All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Standard Drawing For exact pinning please see connection table! Specification may change without notice. 12 Bottom View 24 13 2.54 (0.10) DIP24 – METAL CASE 2.00 (0.08) 10.16 (0.40) PEAK Modelcode Datecode 31.75 (1.25) 3.05 (0.12) PIN CONNECTIONS # SINGLE DUAL 2 - Vin - Vin 3 - Vin - Vin 9 Omitted Common 11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin others Omitted Omitted App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Test by nominal input voltage and constant resistor load. ³ = It’s recommended to add C1(68mF), C2(33mF), L(12mH) in input end to achieve EN55022 conducted Class A. EMC SPECIFICATIONS Radiated Emissions Conducted Emissions³ ESD RS EFT CS PFMF EN 55022 CLASS A EN 55022 CLASS A IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-6 IEC 61000-4-8 Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria A PEN-Series – PEN4-xxxxE/Z4:1LF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/3