UNISONIC TECHNOLOGIES CO., LTD UD22K Preliminary DUAL TRANSISTOR DIGITAL TRANSISTOR (BUILT-IN RESISTORS) DESCRIPTION The UTC UD22K is a dual transistor, including an NPN transistor and a PNP transistor. FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input. EQUIVALENT CIRCUITS ORDERING INFORMATION Ordering Number Note: UD22KG-AL6-R Pin Assignment: G: GND I: IN UD22KG-AL6-R Package SOT-363 1 G1 Pin Assignment 2 3 4 5 I1 O2 G2 I2 6 O1 Packing Tape Reel O: OUT (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AL6: SOT-363 (3)Green Package (3) G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R221-020.b UD22K Preliminary DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise noted) PARAMETER SYMBOL LIMITS TR1 50 -5 ~ + 30 100 100 UNIT TR2 -50 -30 ~ + 5 -100 -100 Collector-Emitter Voltage VCEO V Collector-Base Voltage VCBO V Emitter-Base Voltage VEBO mA Collector Current - Continuous IC mA Junction Temperature TJ 150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL θJA RATINGS 415 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise noted) TR1 PARAMETER OFF CHARACTERISTICS Input Voltage Output Voltage Input Current Output Current ON CHARACTERISTICS DC Current Gain SMALL SIGNAL CHARACTERISTICS Transition Frequency Input Resistance Resistance Ratio SYMBOL VIN(OFF) VIN(ON) VOUT(ON) IIN IO(OFF) TEST CONDITIONS IC=100µA, IB=0 IC=10µA, IE=0 IE=10µA, IC=0 VIN=5V VCC=50V, VIN=0V hFE VOUT=5V, IOUT=10mA fT VCE=-10V, IE=-5mA, f=100MHz (Note 1) R1 R2/R1 MIN TYP MAX UNIT 0.5 1.3 0.1 0.3 1.8 0.5 V V V mA µA 80 250 MHz 3.29 8 4.7 10 6.11 12 KΩ MIN TYP MAX UNIT TR2 PARAMETER OFF CHARACTERISTICS Input Voltage Output Voltage Input Current Output Current ON CHARACTERISTICS DC Current Gain SMALL SIGNAL CHARACTERISTICS Transition Frequency Input Resistance Resistance Ratio Note: Transition frequency of the device. SYMBOL VIN(OFF) VIN(ON) VOUT(ON) IIN IO(OFF) VCC=-5V, IOUT=-100μA VOUT=-0.3V, IOUT=-5mA IOUT/IIN=-5mA/-0.25mA VIN=-5V VCC=-50V, VIN=0V hFE VOUT=5V, IOUT=10mA fT VCE=-10V, IE=-5mA, f=100MHz (Note 1) R1 R2/R1 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS -0.5 -1.3 -0.1 -0.3 -1.8 -0.5 V V V mA µA 80 250 3.29 8 3.7 10 MHz 6.11 12 KΩ 2 of 3 QW-R221-020.b UD22K Preliminary DUAL TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R221-020.b