UNISONIC TECHNOLOGIES CO., LTD DTC144V Advance NPN SILICON TRANSISTOR NPN DIGITAL TRANSISTOR (BUILT- IN BIAS RESISTORS) FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow negative input. EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number DTC144VG-AE3-R DTC144VG-AL3-R Note: Pin Assignment: B: Base C: Collector Package SOT-23 SOT-323 Pin Assignment 1 2 3 E B C E B C Packing Tape Reel Tape Reel E: Emitter MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1of 3 QW-R221-035 .a DTC144V Advance NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA= 25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT VCC 50 V VIN -10 ~ +40 V IOUT 100 mA Output Current 100 mA IOUT(MAX) Power Dissipation PD 200 mW Junction Temperature TJ +150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage Input Voltage ELECTRICAL CHARACTERISTICS (TA= 25°C, unless otherwise specified) PARAMETER Input Voltage Output Voltage Input Current Output Current DC Current Gain Input Resistance Resistance Ratio Transition Frequency SYMBOL VIN(OFF) VIN(ON) VOUT(ON) IIN IOUT(OFF) hFE R1 R2 fT TEST CONDITIONS VCC= 5V, IOUT=100μA VOUT= 0.3V, IOUT= 20mA IOUT/IIN= 10mA / 0.5mA VIN= 5V VCC= 50V , VIN=0V VOUT= 5V, IOUT= 5mA VCE= 10V, IE= -5mA, f=100MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.5 V 0.1 0.3 0.18 0.5 V mA μA 47 10 250 61.1 kΩ kΩ MHz 3 33 32.9 2 of 3 QW-R221-035.a DTC144V Advance NPN SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R221-035.a