Pan-Way ® T-70 Surface Raceway System SPECIFICATION SHEET specifications Pan-Way ® T-70 Raceway T-70 non-metallic multi-channel capable surface raceway shall be used to route, protect, and conceal data, voice, video, fiber optic and power cabling. The raceway shall be listed as suitable for use in applications up to 600 volts between conductors by Underwriters Laboratories, Inc. per standard 5A, and by Canadian Standards Association, Inc. per 22.2 no. 62.1-03, when screw secured and installed per instructions. A full complement of fittings with a 1” minimum bend radius compliant with TIA/EIA-568-B, must be available as well as device brackets and internal junction boxes to install a variety of communication and electrical devices. Divider walls must be available to form separate channels in the multi-channel raceway. “Snap-on” faceplates for data and power terminations shall be available. An offset box shall be available, with versions for Panduit “snap-on” as well as “screw mount” faceplates, for mounting the power receptacle outside of the raceway channel. T-70 raceway will be manufactured from impact-resistant material with flammability rating of V-0. T-70 raceway must be tamper resistant yet, also allow access for moves, adds and changes. T-70 raceway finish shall be pure color and will resist scratches and dents and will not peel or corrode. T-70 raceway shall be available in four standard colors and shall be optimized for use with the Panduit® Pan-Net ® Communication System. Raceway Base 6 feet: 8 feet: 10 feet: T70BIW6 T70BIW8 T70BIW10 Raceway Cover 6 feet: 8 feet: 10 feet: T70CIW6 T70CIW8 T70CIW10 Divider Wall 6 feet: 8 feet: 10 feet: T70DW6 T70DW8 T70DW1 T-70 Raceway Fittings and Accessories Base coupling: T70BCIW-X Cover coupling: T70CCIW-X Outside corner fitting: T70OCIW technical information Inside corner fitting: T70ICIW Material: Rigid PVC Flammability: UL94V-0; FT4 Voltage rating: UL-5A 600VAC; CSA C22.2 No. 62.1-03 600V Approvals: UL Listed 95425 (raceway); UL Listed E116129 (fittings) NEC: Article 388 Color: Off White (IW), Electrical Ivory (EI), White (WH). International Gray (IG) available in 8' lengths only. CSI spec form: LP-CSISPEC-T70-1 Right angle fitting: T70RAIW End cap fitting: T70ECIW Entrance end fitting: T70EEIW Tee fitting: T70TIW key features and benefits Transition fitting cover only: 1” bend radius control fittings Cables in the raceway will satisfy the minimum 1” bend radius requirement, preventing the potential degradation of cable performance; meets TIA/EIA standard and many warranty requirements Device bracket: T70DB-X Snap-on faceplates Faceplates snap directly onto the raceway base; cabling can be quickly accessed by removing only the faceplate, which requires less labor and lowers the cost of maintenance Standard faceplate bracket: T70SDB-X Three sided hanging box: T70HB3-X GFCI three sided hanging box: T70HB3GFCI-X Hanging box: T70HB-X Workstation Outlet Center ™ Offset Box: T70WCIW Workstation Outlet Center ™ Offset Box: T70WC2IW Insert for tee fitting: T70TD Transition fitting base/cover: T70TRIW T70TRCIW Wire retainer:T70WR-X Channel has a 70mm opening Accepts any manufacturer’s NEMA standard snap-on or screw-on power or communication faceplates Highly tamper resistant Very difficult for untrained personnel to enter the raceway or remove faceplates; provides maximum security for communication cabling and maximum safety for power cabling Non-metallic construction Lightweight reduces installer fatigue; solid color throughout profile will not chip peel, rust, corrode, or scratch; easy to cut reducing the need for special cutting devices; high impact resistance; durable Designer profile Aesthetically pleasing and matches a wide variety of decors Backfeed fitting: T70BFIW Available in four standard colors Matches a variety of colors for various applications Backfeed fitting insert: T70BFI Fiberspool bracket (two halves): T70FSB applications Pan-Way T-70 Non-Metallic Surface Raceway is a multi-channel channel raceway which provides solutions for routing low voltage, fiber optic and/or power cabling along perimeter walls. T-70 raceway can mount NEMA standard screw-on faceplates or ® w w w. p a n d u it.c o m superior Pan-Way Snap-On Faceplates directly to the channel. T-70 features the Workstation Outlet Center ™ Offset Box, which provides an offset solution to maximize channel capacity and outlet density. ® For standard colors other than IW (Off White), replace IW in part number with EI (Electrical Ivory), WH (White) or IG (International Gray). IG (International Gray) is available in 8' lengths only. Pan-Way ® T-70 Surface Raceway System Wire Fill Electrical Cables Data Grade Cables 14 12 10 AWG AWG AWG 24 AWG 24 AWG THHN/THWN/T90 Cat. 5e Plenum Cat. 5e Riser Cat. 6 Cat. 6A 0.111 0.130 0.164 DIA = 0.193 DIA = 0.225 DIA = 0.240 DIA = 0.289 FILL FILL FILL FILL FILL FILL 24 AWG 24 AWG Fiber Optic Cable Coax Cables 24 AWG 24 AWG 24 AWG Cat. 6A Cat. 6A Cat. 6A (SD) RG6 RG59/u 2 Strand DIA = 0.300 DIA = 0.330 DIA = 0.240 DIA = 0.275 DIA = 0.242 DIA = 0.175 FILL FILL FILL FILL FILL Raceway Fill MAX MAX MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX Type and Area Configuration (in²) (UL Temp Rise Test) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) T-70: No devices 5.15 24 20 15 70 105 51 77 45 68 31 47 29 43 24 36 45 68 34 52 44 67 85 128 0.86 14 11 7 ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 1.72 ** ** ** 23 35 17 25 15 22 10 15 9 14 8 12 15 22 11 17 14 22 28 42 T-70: Data only (Screw-On 3.67 Faceplates) ** ** ** 50 75 36 55 32 48 22 33 20 31 17 25 32 48 24 37 31 47 61 91 T-70: Data only (Snap-On 4.71 Faceplates) ** ** ** 64 96 47 71 41 62 28 43 26 39 22 33 41 62 31 47 40 61 78 117 14 11 7 ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 42 63 31 47 27 41 19 28 17 26 14 21 27 41 21 31 27 40 51 77 T-70: Power and data using the three-sided hanging box and device bracket T-70: Power 0.91 and data using the Workstation Outlet Center™ 3.12 Offset Box T-70 Internal Area = 5.15 Sq. In. T-70 Raceway T70B T70C Pan-Way ® T-70 Surface Raceway System Fittings and Accessories T70BC-X T70T T70HB-X T70CC-X T70OC T70TD T70WR-X T70DW T70TR T70TRC T70WC T70WC2 T70IC T70BF T70BFI T70RA T70DB-X T70TRI T70EC T70HB3-X T70SDB-X T70EE T70HB3GFCI-X T70FSB WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. SRSP22--WW-ENG Replaces WW-SRSP12 1/2015