Pan-Way ® Twin-70 Surface Raceway System S P E C I F I C AT I O N S H E E T specifications Twin-70 non-metallic, multi-channel surface raceway is used to route, protect, and conceal data, voice, fiber optic, and power cabling. The raceway is listed as suitable for use in applications up to 600 volts between connectors when screw secured and installed per instructions. A full complement of fittings with a 1" minimum bend radius is available as well as device brackets and internal junction boxes to install a variety of communication and electrical devices. The raceway provides two separate covers to maintain total separation of power and low voltage cabling. The Twin-70 raceway finish is pure in color and will resist scratches and dents, and will not peel or corrode. Twin-70 raceway is available in three standard colors and is optimized for use with the Panduit® Pan-Net® Communication System. technical information Material: Rigid PVC Flammability: UL94V-0; FT4 Voltage rating: UL 600V / CSA 600V Safety compliance: UL Listed 95425 (raceway); UL Listed E116129 (fittings) NEC: Article 388 Capacity: Multi-channel Operating and storage temperature: 0° to 50°C Pan-Way ® Twin-70 Raceway Raceway Bases 8 feet: 10 feet: Raceway Covers 8 feet: 10 feet: Divider Walls 8 feet: 10 feet: T702BIW8 T702BIW10 T70CIW8 T70CIW10 T70DW8 T70DW10 Twin-70 Raceway Fittings Base coupler: Cover coupler: Outside corner: Inside corner: Right angle: End cap: Entrance end: Tee fitting: Transition to T-70: Transition to LD/T-45: Transition divider insert: T702BCIW-X T70CCIW-X T702OCIW T702ICIW T702RAIW T702ECIW T702EEIW T702TIW T702TRIW T702TRLIW T702TRI Twin-70 Accessories key features and benefits Separate covers throughout the system Maintains complete separation of power and data cabling systems and provides maximum safety during installation for moves, adds, and changes 1" bend radius control fittings Cables in the raceway will satisfy the minimum 1" bend radius requirement, preventing the potential degradation of cable performance Snap-on faceplates Faceplates snap directly onto the raceway base; cabling can be quickly accessed by removing only the faceplate, requiring less labor and lowers the cost of maintenance Designer profile Maintains the same aesthetically pleasing profile of Panduit T-45, T-70, and TG-70 raceway which allows all four systems to work together or independently Non-metallic Lightweight, reducing installer fatigue and labor required to install the raceway. Easy to cut with standard saws and saw blades, eliminating the need for special cutting devices Available in different lengths, and colors Available lengths – 8', 10' Available colors – IW, EI, WH Raceway is field paintable to match walls and surrounding décor. applications Pan-Way ® Twin-70 Surface Raceways are designed to provide easy and economical solutions for routing power and low voltage cable in independent channels along perimeter walls, baseboards or ceilings. w w w. p a n d u it.c o m This raceway is a perfect solution for schools, hospitals, offices or anywhere high cable capacity is required. Wire retainer: Device bracket: Standard faceplate bracket: Three sided hanging box: GFCI three sided hanging box: Hanging box: Spacer plate: Fiber spool bracket: T70WR-X T70DB-X T70SDB-X T70HB3-X T70HB3GFCI-X T70HB-X T70S-X T70FSB For standard colors other than IW (Off White), replace IW in part number with EI (Electrical Ivory) or WH (White). Pan-Way ® Twin-70 Surface Raceway System Wire Fill TWIN-70 Left Internal Area = 4.59 Sq. In. Right Inrenal Area = 4.59 Sq. In. Electrical Cables 14 AWG 12 AWG Data Grade Cables 10 AWG THHN/THWN/T90 Raceway Type and Configuration Fill Area (in²) 0.111 0.130 0.164 MAX MAX MAX (UL Temp Rise Test) Twin-70: Power and data (no terminations) 24 AWG 23 AWG 26 AWG 23 AWG Cat. 5e Cat. 6 Cat. 6A (SD) Cat. 6A DIA = 0.193 DIA = 0.240 DIA = 0.240 FILL FILL FILL FILL Fiber Optic Cable Coax Cables RG6 RG59/u 2 Strand DIA = 0.300 DIA = 0.275 DIA = 0.242 DIA = 0.175 FILL FILL FILL FILL SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) 2.05 — — — 28 42 18 27 18 27 11 17 13 20 17 26 34 51 1.43 16 16 15 — — — — — — — — — — — — — — Twin-70: One channel (no devices) 4.59 — — — 62 94 40 60 40 60 25 38 30 46 39 59 76 114 Twin-70: Data only (Screw-On Faceplate) 3.11 — — — 42 63 27 41 27 41 17 26 20 31 27 40 51 77 Twin-70: Power only (Screw-On Faceplate) 3.32 15 13 13 — — — — — — — — — — — — — — Twin-70: Data only (Snap-On Faceplate) 4.14 — — — 56 84 36 54 36 54 23 35 27 41 36 54 68 103 Twin-70: TVSS Power (Snap-On Faceplate) 2.33 16 16 14 — — — — — — — — — — — — — — Note: Cable diameters shown are industry averages and not necessarily Panduit specific, except for Cat. 6A (SD). Tw i n - 7 0 L i n e a r t T702B T702B ww w . p a n d u it.c o m T70C T70C Pan-Way ® Twin-70 Surface Raceway System Fittings and Accessories T702BC-X T70CC-X T702OC T702IC T702RA T702EC T702EE T702T T702TR T702TRL T702TRI T70WR-X T70DB-X T70SDB-X T70HB3-X T70HB3GFCI-X T70HB-X T70S-X T70FSB WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. SRSP28--WW-ENG Replaces WW-SRSP09 06/2016