TYPE T70 RACEWAY SYSTEM FOR USE WITH PANDUIT SURFACE RACEWAY ROUTING SYSTEM Part Number(s):T70B, T70C, T70DW, T70WR, T70HB, T70DB, T70BC, T70CC, T70IC, T70RA, T70OC, T70EC INSTALLATION INSTRUCTIONS © Panduit Corp. 2013 RW55B ** Electrical Cables See Fig. Raceway Type 14 AWG 12 AWG 10 AWG 0.105 T70 with Divider Wall and A Wire Retainer T70 with Hanging Box 14 B C 0.122 11 14 C B D 7 * D A 0.153 * * 11 7 * * * T70 with Device Bracket and Device E 24 20 15 T70 with Wire Retainers F 24 20 15 F E * COMMUNICATION CONDUCTORS ONLY. ** WIRES NOT BUNDLED BASE & COVER 2 1a 3 1 The mounting hardware used to secure the raceway shall be appropriate for the mounting surface. 16”(406.4mm) 1.5”(38.1mm)MAXIMUM FITTINGS BASE COUPLER 3 4 2 1 COVER COUPLER 1 2 3 For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 4 INSTALLATION INSTRUCTIONS © Panduit Corp. 2013 RW55B INSIDE CORNER 1 5 4 3 2 OUTSIDE CORNER 1 3 2 4 5 RIGHT ANGLE 1 5/8”(16mm) 2 3 4 5 5/8”(16mm) For Technical Support: www.panduit.com/resources/install_maintain.asp Page 2 of 4 INSTALLATION INSTRUCTIONS © Panduit Corp. 2013 RW55B END CAP 3 4 1 2 END CAP WITH CONDUIT CONNECTOR 3 1 4 2 6 7 5 ACCESSORIES DIVIDER WALL 1 2 WIRE RETAINER 1 2a 2 2b 18”(457.2mm)-24”(609.6mm) 3 For Technical Support: www.panduit.com/resources/install_maintain.asp Page 3 of 4 INSTALLATION INSTRUCTIONS © Panduit Corp. 2013 RW55B HANGING DEVICE BRACKET 2 1 2b 2a 4 3 6 5 HANGING BOX 2a 2 1 3 2b 5 4 7 6 8 E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 4 of 4 Fax: 866-405-6654 Rev. 10