NetKey ® Fiber Optic Connectors – Pre-Polished Cam Termination DATA SHEET Pre-polished fiber optic connectors are TIA/EIA-604 FOCIS compliant and contain a factory-terminated fiber, eliminating field polishing and adhesive. Pre-polished fiber optic connectors captivate fiber and buffer in one action allowing for up to two re-terminations with no degradation in performance. NetKey ® SC OptiCam ® Pre-Polished Connectors with Composite Ferrule technical information Standards compliance: ST Opticam ® Connectors SC Opticam ® Connectors TIA/EIA-604 FOCIS-2 compliant; exceeds TIA/EIA-568-B.3 requirements TIA/EIA-604 FOCIS-3 compliant exceeds TIA/EIA-568-B.3 requirements Fiber 62.5/125µm OM1, 50/125µm OM2, 10Gig™ 50/125µm laser optimized compatibility: OM3/OM4 and 9/125µm OS1/OS2 Fiber size and type: 900µm tight-buffered fiber; 250µm coated fiber, by using F250BT-C 250 micron fiber build-up tube kit or FO6CB or FO12CB fan-out kit Performance: Insertion loss: Return loss: Composite 0.3dB average (multimode) Composite >20dB (multimode) key features and benefits ST Opticam ® Connectors SC Opticam ® Connectors Factory pre-polished fiber stub end face Eliminates inconsistent and time-consuming field polishing to deliver required optical performance; reduces termination time (less than half the time of field polish connectors) and the number of installation tools required Dual cam design with fiber and buffer clamps Secures both the fiber and the buffer during the camming step to facilitate consistent termination results; reduces the termination time compared to conventional termination methods Allows up to two re-terminations to achieve optimum termination results; reduces the number of rejected connectors and terminations to provide yield rates approaching 100% for lower installed cost Translucent housing assembly Facilitates inspection of the fiber termination quality; results in rapid installations, improved termination yields, and lower installed costs Consistently provides higher than industry standard cable retention; requires Mechanical cable retention no adhesive, speeding installation Non-optical disconnect – Maintains data transmission under tensile loads for jacketed cable ® Opticam Termination Tool Universal termination Secures both fiber and buffer in one action for all OptiCam ® Connectors with connector specific cradles (included); ensures fast, consistent, and optimal terminations Integrated Offers visual indication of proper termination after the cam step has been visual completed; virtually eliminates operator error to deliver a higher yield for a termination lower installed cost indicator (VTI) applications • Fiber optic backbone and horizontal applications • Maintenance or emergency restoration of fiber networks w w w. p a n d u i t . c o m • Retrofit/initial install in both behind-the-wall (BTW) permanent side of panelized interconnect and cross-connect • Remote areas and confined spaces • OptiCam ® Termination Tool gives installers the flexibility to terminate in very close proximity to the application 50/125µm mm simplex: NKFSCMPC5BL 50/125µm mm simplex (100 pk.): NKFSCMPC5BL-C 62.5/125µm mm simplex: NKFSCMPC6EI 62.5/125µm mm simplex (100 pk.): NKFSCMPC6EI-C NetKey ® ST OptiCam ® Pre-Polished Connectors with Composite Ferrule 50/125µm mm simplex: NKFSTMPC5BL 50/125µm mm simplex (100 pk.): NKFSTMPC5BL-C 62.5/125µm mm simplex: NKFSTMPC6EI 62.5/125µm mm simplex (100 pk.): NKFSTMPC6EI-C OptiCam ® 1.6/2.0mm Boot Assemblies 10Gig ® multimode (Aqua): FMCBT2AQ-X* Multimode (Black): FMCBT2BL-X* Singlemode (Blue): FSCMT2UB-X* *X = Bag of 10 boots; 100 per carton OptiCam ® 3.0mm Boot Assemblies 10Gig ® multimode (Aqua): FMCBT3AQ-X* Multimode FMCBT3BL-X* (Black): Singlemode (Blue): FSCMT3UB-X* *X = Bag of 10 boots; 100 per carton OptiCam ® Termination Tooling OptiCam ® Termination Kit: FCAMKIT OptiCam ® Conversion Kit (upgrades OptiCrimp ® to also terminate OptiCam ® Connectors): FPPKIT-CVY Field polish kit upgrade (upgrades field polish kit to also terminate OptiCam ® Connectors): FIELDKITUPG ST cradles (2 per pkg.): FSTC SC cradles (2 per pkg.): FSCC NetKey ® Fiber Optic Connectors – Pre-Polished Cam Termination NetKey ® SC OptiCam ® Pre-Polished Simplex Connector 2.23 [56.6] NetKey ® ST OptiCam ® Pre-Polished Simplex Connector 2.36 [59.9] OptiCam ® Termination Tool Dimensions are in inches. [Dimensions in brackets are metric]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Jalisco, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800-777-3300 and reference NKDS17 ©2010 Panduit Corp. ALL RIGHTS RESERVED. WW-NKDS17 2/2010