ST OptiCam™ Pre-Polished Fiber Optic Connectors SPECIFICATION SHEET specifications ST OptiCam ™ Pre-Polished Connectors with Zirconia Ceramic Ferrules ST pre-polished fiber optic connectors shall be TIA/EIA-604 FOCIS-2 compliant and contain a factory-terminated fiber, eliminating field polishing and adhesive. ST pre-polished connectors shall have an average insertion loss of 0.3dB per mated pair for multimode and singlemode fiber. ST pre-polished connectors shall captivate fiber and buffer in one action allowing for up to two re-terminations with no degradation in performance. 10Gig 50/125µm (laser optimized) simplex: 50/125µm simplex: 62.5/125µm simplex: 9/125µm simplex: FSTMCXAQs FSTMC5BLs FSTMC6BLs FSTSCBUs technical information ST OptiCam ™ Pre-Polished Connectors with Composite Ferrules Standards requirements: TIA/EIA-604 FOCIS-2 compliant; exceeds TIA/EIA-568-B.3 requirements 50/125µm simplex: 62.5/125µm simplex: Fiber compatibility: 62.5/125µm OM1, 50/125µm OM2, 10Gig 50/125µm laser optimized OM3/OM4 and 9/125µm OS1/OS2 OptiCam ™ 1.6/2.0mm Boot Assemblies Fiber size and type: 900µm tight-buffered fiber 250µm coated fiber, by using F250BT-C 250 micron fiber build-up tube kit or FO6CB or FO12CB fan-out kit 10Gig multimode (aqua): FMCBT2AQ-X* Multimode (black): FMCBT2BL-X Singlemode (blue): FSCBT2BU-X Jacketed cable size: 1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots OptiCam ™ 3.0mm Boot Assemblies Ferrule type: Zirconia ceramic or composite ferrule with a pre-polished fiber stub Insertion loss: Ceramic: 0.3dB average (multimode and singlemode) Composite: 0.3dB average (multimode) 10Gig multimode (aqua):FMCBT3AQ-X* Multimode (black): FMCBT3BL-X Singlemode (blue): FSCBT3BU-X Return loss: Ceramic: >20dB (multimode), >26dB (10Gig multimode), >50dB (singlemode) Composite: >20dB (multimode) FSTMPC5BLs FSTMPC6BLs *X = Bag of 10 Boots; 100 per carton. OptiCam ™ Termination Tooling key features and benefits ST OptiCam ™ Connectors Factory pre-polished fiber stub endface Eliminates inconsistent and time-consuming field polishing to deliver required optical performance; reduces termination time (less than half the time of field polish connectors) and the number of installation tools required Dual cam design with fiber and buffer clamps Secures both the fiber and the buffer during the camming step to facilitate consistent termination results; reduces the termination time compared to conventional termination methods Allows up to two re-terminations to achieve optimum termination results; reduces the number of rejected connectors and terminations to provide yield rates approaching 100% for lower installed costs Translucent housing assembly Facilitates inspection of the fiber termination quality; results in rapid installations, improved termination yields, and lower installed costs Mechanical cable retention Consistently provides higher than industry standard cable retention; requires no adhesive, speeding installation Choice of zirconia ceramic or composite ferrules Provides material option with comparable performance to meet application requirements; zirconia ceramic provides the highest durability for repeated matings OptiCam ™ Termination Kit: FCAMKIT OptiCam ™ Conversion Kit (upgrades Opti-Crimp ™ Kit to also terminate OptiCam ™ Connectors): FPPKIT-CVY Field Polish Kit Upgrade (upgrades Field Polish Kit to also terminate OptiCam ™ Connectors): FIELDKITUPG ST cradles (2 per pkg.): FSTC Mini-Com ™ ST Adapter Modules Multimode: Singlemode: CMST** CMSTZ** **Substitute for module color: EI = Electric Ivory, BU = Blue, BL = Black, IW = Off White, AW = Arctic White. Opticom ™ ST Fiber Adapter Panels 6 simplex MM adapters: FAP6WST 6 simplex SM adapters: FAP6WSTZ 8 simplex MM adapters: FAP8WST 8 simplex SM adapters: FAP8WSTZ Opti-Core ™ ST Patch Cords OptiCam ™ Termination Tool Universal termination tool Secures both fiber and buffer in one action for all OptiCam Connectors with connector specific cradles (included); ensures fast, consistent, and optimal terminations Integrated visual termination indicator (VTI) Offers visual indication of proper termination after the cam step has been completed; virtually eliminates operator error to deliver a higher yield for a lower installed cost ™ applications ST fiber optic connectors are widely used in fiber optic backbone and horizontal applications for high-speed data transmission. Typical applications for ST OptiCam ™ Connectors include maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect. w w w . pa n d u it.c om ST OptiCam ™ Connectors eliminate the need for end face polishing and adhesive providing easier, faster installation, especially in remote areas and confined spaces. The hand-held OptiCam ™ Termination Tool gives installers the flexibility to terminate in very close proximity to the application without having to switch tools or find benchtop space. Duplex ST to ST: Simplex ST to ST: Duplex ST to SC: Simplex ST to SC: F^D2-2M‡Y F^S2-2M‡Y F^D2-3M‡Y F^S2-3M‡Y Add -C to simplex connector part numbers for bulk packs of 100 connectors. s ^Substitute for fiber type: 6 = 62.5/125µm OM1, 5 = 50/125µm OM2, X = 10Gig 50/125µm OM3/OM4 or 9 = 9/125µm OS1/OS2. ‡Substitute for length in meters: 1, 2, 3, 5, or 10. Contact Customer Service for other available lengths. ST OptiCam ™ Pre-Polished Fiber Optic Connectors performance information Description Test Parameter Result Qualification test suite (TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental, and optical test sequences Exceeds TIA/EIA-568-B.3 requirements Connector intermatability Dimensional and material compliance to TIA/EIA standards All connectors are FOCIS compliant with TIA/EIA-604-2-A Repeated mating 500 mate/unmate cycles Max. insertion loss: 0.75dB Min. return loss: 20dB Exceeds TIA/EIA-568-B.3 test requirements: <0.1dB additional insertion loss TIA/EIA-568-B.3 requirement: Cable retention (straight pull): Exceeds TIA/EIA-568-B.3 requirements: 900µm tight-buffered fiber 0.5 lbs. load applied with <0.5dB increase in insertion loss after test 1.0 lbs. avg. load applied with <0.2dB increase in insertion loss after test Jacketed cable 11.24 lbs. load applied with <0.5dB increase in insertion loss after test 11.24 lbs. load applied with <0.1dB increase in insertion loss after test* *Jacketed cable retention tensile load may vary based on specific manufacturer’s jacketed cable diameter and aramid yarn count. selection information Part Number Connector Type Ferrule Material Fiber Ferrule Finish Backbone Color Boot Color Average Insertion Loss** Return Loss FSTMCXAQ Simplex Zirconia Ceramic 10 GbE 50/125µm (laser optimized) OM3/ OM4 SPC Aqua Aqua 0.3dB >26dB FSTMC5BL Simplex Zirconia Ceramic 50/125µm OM2 SPC Black Black 0.3dB >20dB FSTMPC5BL Simplex Composite FSTMC6BL Simplex Zirconia Ceramic 62.5/125µm OM1 SPC Electric Ivory Black 0.3dB >20dB 9/125µm OS1/OS2 UPC Blue Blue 0.3dB >50dB FSTMPC6BL Simplex Composite FSTSCBU Simplex Zirconia Ceramic **All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. OptiCam ™ Boot Assemblies For 1.6/2.0mm Jacketed Cable ST OptiCam Pre-Polished Simplex Connector OptiCam ™ Termination Tool ™ 0.95 [24.1] FSCBT2BU-X For 3.0mm Jacketed Cable 2.23 [56.6] 0.95 [24.1] FSTMC*** OCTT (Patch cords available separately or in termination kits) FSCBT3BU-X ***Substitute for fiber type: For multimode, insert XAQ for 10Gig 50/125µm, 5BL for 50/125µm, or 6BL for 62.5/125µm. For composite ferrules, insert a P after the M in the part number. For singlemode, insert BU for 9/125µm, and replace M with S. Singlemode boot assembly part numbers (blue) are shown. For multimode boot assemblies, replace S (Singlemode) in part number with M (Multimode) and replace BU (Blue) with AQ (Aqua) or BL (Black). Dimensions are in inches. [Dimensions in brackets are in millimeters.] WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. FBSP22--WW-ENG 3/2015