LC OptiCam ® Pre-Polished Fiber Optic Connectors SPECIFICATION SHEET specifications LC small form factor (SFF) pre-polished connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible and contain a factory-terminated fiber, eliminating field polishing and adhesive. LC pre-polished connectors shall have an average insertion loss of 0.3dB per mated pair for multimode and singlemode fiber. LC pre-polished connectors shall captivate fiber and buffer in one action allowing for up to two re-terminations with no degradation in performance. technical information Standards requirements: TIA/EIA-604 FOCIS-10 compatible; exceeds TIA/EIA-568-B.3 requirements Fiber compatibility: 62.5/125µm OM1, 50/125µm OM2, 10Gig ™ 50/125µm laser optimized OM3/OM4 and 9/125µm OS1/OS2 Fiber cable type: 900µm tight-buffered cable only Fiber cable size: 1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots Ferrule type: Zirconia ceramic with a pre-polished fiber stub Insertion loss: Ceramic: 0.3dB average (multimode and singlemode) Return loss: Ceramic: >20dB (multimode), >26dB (10Gig multimode), >50dB (singlemode) ™ LC OptiCam Connectors ® Factory pre-polished fiber stub endface Eliminates inconsistent and time-consuming field polishing to deliver required optical performance; reduces termination time (less than half the time of field polish connectors) and the number of installation tools required Dual cam design with fiber and buffer clamps Secures both the fiber and the buffer during the camming step to facilitate consistent termination results; reduces the termination time compared to conventional termination methods Allows up to two re-terminations to achieve optimum termination results; reduces the number of rejected connectors and terminations to provide yield rates approaching 100% for lower installed costs Translucent housing assembly Facilitates inspection of the fiber termination quality; results in rapid installations, improved termination yields, and lower installed costs Non-optical disconnect Maintains data transmission under tensile loads for jacketed cable Mechanical cable retention Consistently provides higher than industry standard cable retention; requires no adhesive, speeding installation Provide the highest durability for repeated matings OptiCam ® Termination Tool Universal termination tool Secures both fiber and buffer in one action for all OptiCam ® Connectors with connector specific cradles (included); ensures fast, consistent, and optimal terminations Integrated visual Offers visual indication of proper termination after the cam step termination indicator (VTI) has been completed; virtually eliminates operator error to deliver a lower installed cost applications LC fiber optic connectors are widely used in fiber optic backbone and horizontal applications for high-speed data transmission. Typical applications for LC OptiCam ® Connectors include maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect. w w w. p a n d u i t . c o m OptiCam ® 1.6/2.0mm Boots 10Gig™ multimode (aqua): FMCBT2AQ-X* Multimode (black): FMCBT2BL-X Singlemode (blue): FSCBT2BU-X OptiCam ® 3.0mm Boots 10Gig™multimode (aqua): FMCBT3AQ-X* Multimode (black): FMCBT3BL-X Singlemode (blue): FSCBT3BU-X *X = Bag of 10 Boots; 100 per carton. key features and benefits Zirconia ceramic ferrules LC OptiCam ® Pre-Polished Connectors with Zirconia Ceramic Ferrules 10Gig ™ 50/125µm (laser optimized) simplex: FLCSMCXAQY▲ ™ 10Gig 50/125µm (laser optimized) duplex: FLCDMCXAQY 50/125µm simplex: FLCSMC5BLY▲ 50/125µm duplex: FLCDMC5BLY 62.5/125µm simplex: FLCSMC6BLY▲ 62.5/125µm duplex: FLCDMC6BLY 9/125µm simplex: FLCSSCBUY▲ 9/125µm duplex: FLCDSCBUY LC OptiCam Connectors eliminate the need for end face polishing and adhesive providing easier, faster installation, especially in remote areas and confined spaces. The hand-held OptiCam ® Termination Tool gives installers the flexibility to terminate in very close proximity to the application without having to switch tools or find benchtop space. ® OptiCam ® Termination Tooling OptiCam ® Termination Kit: FCAMKIT OptiCam ® Conversion Kit (upgrades Opti-Crimp ® Kit to also terminate OptiCam ® Connectors): FPPKIT-CVY Field Polish Kit Upgrade (upgrades Field Polish Kit to also terminate OptiCam ® Connectors): FIELDKITUPG LC cradles (2 per pkg.): FLCC LC Fiber Optic Adapters 10Gig™ multimode: FADJLCAQ-L* Multimode: FADJLCEI-L Singlemode: FADJLCZBU-L *L = Bag of 50 adapters; 100 per carton. Mini-Com ® LC Adapter Modules 10Gig™ multimode: CMDJAQLC** Multimode: CMDJEILC** Singlemode: CMDJLCZBU **Substitute for module color: EI = Electric Ivory, BU = Blue, BL = Black, IW = Off White, AW = Arctic White Opticom ® LC Fiber Adapter Panels 6 duplex MM adapters: FAP6WEIDLC 6 duplex SM adapters: FAP6WBUDLCZ 12 duplex MM adapters: FAP12WEIDLC 12 simplex SM adapters: FAP12WBULCZ Opti-Core ® LC Patch Cords Duplex LC to LC: F^E10-10M‡Y Simplex LC to LC: F^F10-10M‡Y Duplex SC to LC: F^E3-10M‡Y Simplex SC to LC: F^F3-10M‡Y LC Lock-in Duplex Clip LC lock-in duplex clip: FLCCLIW-X ▲ Add -C to simplex connector part numbers for bulk packs of 100 connectors. ^Substitute for fiber type: 6 = 62.5/125µm OM1, 5 = 50/125µm OM2, X = 10Gig™ 50/125µm OM3/OM4 or 9 = 9/125µm OS1/OS2. ‡Substitute for length in meters: 1, 2, 3, 5 or 10. Contact Customer Service for other available lengths. LC OptiCam ® Pre-Polished Fiber Optic Connectors performance information Description Test Parameter Result Qualification test suite (TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental, and optical test sequences Exceeds TIA/EIA-568-B.3 requirements Connector intermatability Dimensional and material compliance to TIA/EIA standards All connectors are FOCIS compatible with TIA/EIA-604-10 Repeated mating 500 mate/unmate cycles Max. insertion loss: 0.75dB Min. return loss: 20dB Exceeds TIA/EIA-568-B.3 test requirements: <0.1dB additional insertion loss Cable retention (straight pull): TIA/EIA-568-B.3 requirement: Exceeds TIA/EIA-568-B.3 requirements: 900µm tight-buffered fiber 0.5 lbs. load applied with <0.5dB increase in insertion loss after test 1.0 lbs. avg. load applied with <0.2dB increase in insertion loss after test Jacketed cable 11.24 lbs. load applied with <0.5dB increase in insertion loss after test 11.24 lbs. load applied with <0.1dB increase in insertion loss after test* *Jacketed cable retention tensile load may vary based on specific manufacturer's jacketed cable diameter and aramid yarn count. selection information Part Number Connector Type FLCSMCXAQY Simplex FLCDMCXAQY Duplex FLCSMC5BLY Simplex FLCDMC5BLY Duplex FLCSMC6BLY Simplex FLCDMC6BLY Duplex FLCSSCBUY Simplex FLCDSCBUY Duplex Ferrule Material Fiber Ferrule Finish Backbone Color Boot Color Average Insertion Loss** Return Loss Zirconia Ceramic 10 GbE 50/125µm (laser optimized) OM3/OM4 SPC Aqua Aqua 0.3dB >26dB Zirconia Ceramic 50/125µm OM2 SPC Black Black 0.3dB >20dB Zirconia Ceramic 62.5/125µm OM1 SPC Electric Ivory Black 0.3dB >20dB Zirconia Ceramic 9/125µm OS1/OS2 UPC Blue Blue 0.3dB >50dB **All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. LC OptiCam ® Pre-Polished Duplex Connector LC OptiCam ® Pre-Polished Simplex Connector OptiCam ® Termination Tool LC Lock-In Duplex Clip OCTT FLCCLIW-X .25 [6.35] 2.23 2.23 [56.6] (56.6) .25 (6.35) 2.23 2.23 [56.6] (56.6) FLCDMC***Y FLCSMC***Y (Patch cords available separately or in termination kits) ***Substitute for fiber type: For multimode, insert XAQ for 10Gig™ 50/125µm, 5BL for 50/125µm, 6BL for 62.5/125µm. For singlemode, insert BU for 9/125µm, and replace M with S. Dimensions are in inches [Dimensions in brackets are in millimeters] WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Jalisco, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800-777-3300 and reference FBSP19 ©2009 Panduit Corp. ALL RIGHTS RESERVED. WW-FBSP19 9/2009