SC OptiCam® Pre-Polished Fiber Optic Connectors S P E C I F I C AT I O N S H E E T specifications LC OptiCam ® Pre-Polished Connectors with Zirconia Ceramic Ferrules SC pre-polished fiber optic connectors shall be TIA/EIA-604 FOCIS-3 compliant and contain a factory-terminated fiber, eliminating field polishing and adhesive. SC pre-polished connectors shall have an average insertion loss of 0.3dB per mated pair for multimode and singlemode fiber. SC pre-polished connectors shall captivate fiber and buffer in one action allowing for up to two re-terminations with no degradation in performance. 10Gig™ 50/125μm (laser optimized) simplex: FSCMCXAQ^^ 10Gig™ 50/125μm (laser optimized) duplex: FSCDMCXAQ 50/125μm simplex: FSCMC5BL^^ 50/125μm duplex: FSCDMC5BL 62.5/125μm simplex: FSCMC6BL^^ 62.5/125μm duplex: FSCDMC6BL 9/125μm simplex: FSCSCBU^^ SC OptiCam ® Pre-Polished Connectors with Composite Ferrules technical information Standards requirements: TIA/EIA-604 FOCIS-3 compliant; exceeds TIA/EIA-568-B.3 requirements Fiber compatibility: 62.5/125µm OM1, 50/125µm OM2, 10Gig™ 50/125µm laser optimized OM3/OM4 and 9/125µm OS1/OS2 Fiber cable type: 900µm tight-buffered cable only Fiber cable size: 1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots Ferrule type: Zirconia ceramic or composite ferrule with a pre-polished fiber stub Insertion loss: Ceramic: 0.3dB average (multimode and singlemode) Composite: 0.3dB average (multimode) Return loss: Ceramic: >20dB (multimode), >26dB (10Gig™ multimode), >50dB (singlemode) Composite: >20dB (multimode) key features and benefits SC OptiCam ® Connectors Factory pre-polished fiber stub endface Eliminates inconsistent and time-consuming field polishing to deliver required optical performance; reduces termination time (less than half the time of field polish connectors) and the number of installation tools required Dual cam design with fiber and buffer clamps Secures both the fiber and the buffer during the camming step to facilitate consistent termination results; reduces the termination time compared to conventional termination methods Allows up to two re-terminations to achieve optimum termination results; reduces the number of rejected connectors and terminations to provide yield rates approaching 100% for lower installed costs Translucent housing assembly Facilitates inspection of the fiber termination quality; results in rapid installations, improved termination yields, and lower installed costs Non-optical disconnect Maintains data transmission under tensile loads for jacketed cable Mechanical cable retention Consistently provides higher than industry standard cable retention; requires no adhesive, speeding installation Choice of Zirconia ceramic or composite ferrules Provides material option with comparable performance to meet application requirements; zirconia ceramic provides the highest durability for repeated matings OptiCam ® Termination Tool Universal termination tool Secures both fiber and buffer in one action for all OptiCam ® Connectors with connector specific cradles (included); ensures fast, consistent, and optimal terminations Integrated visual termination indicator (VTI) Offers visual indication of proper termination after the cam step has been completed; virtually eliminates operator error to deliver a higher yield for a lower installed cost applications SC fiber optic connectors are widely used in fiber optic backbone and horizontal applications for high-speed data transmission. Typical applications for SC OptiCam® Connectors include maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect. w w w. p a n d u it.co m SC OptiCam® Connectors eliminate the need for end face polishing and adhesive providing easier, faster installation, especially in remote areas and confined spaces. The hand-held OptiCam® Termination Tool gives installers the flexibility to terminate in very close proximity to the application without having to switch tools or find benchtop space. 50/125µm simplex:FSCMPC5BL^^ 62.5/125µm simplex:FSCMPC6BL^^ OptiCam ® 1.6/2.0mm Boot Assemblies 10Gig™multimode (aqua): FMCBT2AQ-X* Multimode (black): FMCBT2BL-X Singlemode (blue): FSCBT2BU-X OptiCam ® 3.0mm Boot Assemblies 10Gig™ multimode (aqua):FMCBT3AQ-X* Multimode (black):FMCBT3BL-X Singlemode (blue):FSCBT3BU-X *X = Bag of 10 Boots; 100 per carton. OptiCam ® Termination Tooling OptiCam ® Termination Kit: FCAMKIT OptiCam ® Conversion Kit (upgrades Opti-Crimp ® Kit to also terminate OptiCam ® Connectors): FPPKIT-CVY Field Polish Kit Upgrade (upgrades Field Polish Kit to also terminate OptiCam ® Connectors): FIELDKITUPG SC cradles (2 per pkg.): FSCC SC Fiber Optic Adapters 10Gig™multimode: Multimode: Singlemode: FADSCAQ-L* FADSCEI-L FADSCZBU-L *L = Bag of 50 adapters; 100 per carton. Mini-Com ® SC Adapter Modules 10Gig™multimode: Multimode: Singlemode: CMDAQSC** CMDEISC** CMSBUSCZ** **Substitute for module color: EI = Electric Ivory, BU = Blue, BL = Black, IW = Off White, AW = Arctic White Opticom ® SC Fiber Adapter Panels 3 duplex MM adapters: FAP3WEIDSC 3 duplex SM adapters: FAP3WBUDSCZ 6 simplex MM adapters: FAP6WEISC 6 simplex SM adapters: FAP6WBUSCZ Opti-Core ® SC Patch Cords Duplex LC to LC: Simplex LC to LC: Duplex SC to LC: Simplex SC to LC: F^D3-3M‡Y F^S3-3M‡Y F^D3-10M‡Y F^S3-10M‡Y ▲ Add -C to simplex connector part numbers for bulk packs of 100 connectors. ^Substitute for fiber type: 6 = 62.5/125μm OM1, 5 = 50/125μm OM2, X = 10Gig™ 50/125μm OM3/OM4 or 9 = 9/125μm OS1/OS2. ‡Substitute for length in meters: 1, 2, 3, 5 or 10.Contact Customer Service for other available lengths. SC OptiCam® Pre-Polished Fiber Optic Connectors performance information Test Parameter Description Result Qualification test suite (TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental and optical test sequences Exceeds TIA/EIA-568-B.3 requirements Connector intermatability Dimensional and material compliance to TIA/EIA standards All connectors are FOCIS compatible with TIA/EIA-604-3 Repeated mating 500 mate/unmate cycles Max. insertion loss: 0.75dB Min. return loss: 20dB Exceeds TIA/EIA-568-B.3 test requirements: <0.1dB additional insertion loss Cable retention (straight pull): TIA/EIA-568-B.3 requirement: Exceeds TIA/EIA-568-B.3 requirements: Jacketed cable 11.24 lbs. load applied with <0.5dB increase in insertion loss after test 11.24 lbs. load applied with <0.1dB increase in insertion loss after test* 900μm tight-buffered fiber 0.5 lbs. load applied with <0.5dB increase in insertion loss after test 1.0 lbs. avg. load applied with <0.2dB increase in insertion loss after test *Jacketed cable retention tensile load may vary based on specific manufacturer’s jacketed cable diameter and aramid yarn count. selection information Part Number Connector Type Ferrule Material Fiber Ferrule Finish Backbone Color Boot Color Average Insertion Loss** Return Loss FSCMCXAQ Simplex FSCDMCXAQ Duplex Zirconia Ceramic 10 GbE 50/125μm (laser optimized) OM3/OM4 SPC Aqua Aqua 0.3dB >26dB FSCMC5BL Simplex FSCDMC5BL Duplex 50/125μm OM2 SPC Black Black 0.3dB >20dB FSCMPC5BL Simplex FSCMC6BL Simplex FSCDMC6BL Duplex Zirconia Ceramic 62.5/125μm OM1 SPC Electric Ivory Black 0.3dB >20dB FSCMPC6BL Duplex Composite FSCSCBU Simplex Zirconia Ceramic 9/125μm OS1/OS2 UPC Blue Blue 0.3dB >50dB Zirconia Ceramic Composite *All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. ® ® ® OptiCam Termination Tool SC OptiCam Pre-Polished Duplex Connector SC OptiCam Pre-Polished Simplex Connector .50 [12.7] 2.23 [56.6] 2.23 [56.6] FSCMC*** FSCDMC*** OCTT ***Substitute for fiber type: For multimode, insert XAQ for 10Gig 50/125µm, 5BL for 50/125µm, or 6BL for 62.5/125µm. For composite ferrules, insert a P after the M in the part number. For singlemode, insert BU for 9/125µm, and replace M with S. ™ (Patch cords available separately or in termination kits) Dimensions are in inches [Dimensions in brackets are in millimeters]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. FBSP17--WW-ENG 3/2015