Datasheet

UNISONIC TECHNOLOGIES CO., LTD
13003ADG
Preliminary
NPN SILICON TRANSISTOR
NPN SILICON POWER
TRANSISTOR
„
DESCRIPTION
These devices are designed for high-voltage, high-speed
power switching inductive circuits where fall time is critical. They
are particularly suited for 115 and 220V applications in switch
mode.
„
FEATURES
* Reverse biased SOA with inductive load @ TC=100°C
* Inductive switching matrix 0.5 ~ 1.5 Amp, 25 and 100°C
Typical tC = 290ns @ 1A, 100°C.
* 700V blocking capability
„
APPLICATIONS
* Switching regulator’s, inverters
* Motor controls
* Solenoid/relay drivers
* Deflection circuits
„
EQUIVALENT CIRCUIT
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
13003ADGL-TM3-T
13003ADGP-TM3-T
13003ADGL-T60-F-K
13003ADGP-T60-F-K
13003ADGL-T92-F-B
13003ADGP-T92-F-B
13003ADGL-T92-F-K
13003ADGP-T92-F-K
Note: Pin Assignment: B: Base C: Collector
E: Emitter
Package
TO-251
TO-126
TO-92
TO-92
Pin Assignment
1
2
3
B
C
E
B
C
E
B
C
E
B
C
E
Packing
Tube
Bulk
Tape Box
Bulk
13003ADGL-T60-F-B
(1)Packing Type
(1) T: Tube, B: Bluk, K: Bulk
(2)Pin Assignment
(2) refer to Pin Assignment
(3)Package Type
(3) TM3: TO-251, T60: TO-126, T92: TO-92
(4)Lead Free
(4) L: Lead Free, P: Halogen Free
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 5
QW-R223-023.c
13003ADG
„
Preliminary
NPN SILICON TRANSISTOR
MARKING
PACKAGE
MARKING
TO-251
TO-126
TO-92
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R223-023.c
13003ADG
„
Preliminary
NPN SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Collector-Emitter Voltage
Collector-Base Voltage
Emitter Base Voltage
SYMBOL
VCEO(SUS)
VCBO
VEBO
IC
ICM
IB
IBM
IE
IEM
RATINGS
400
700
9
Continuous
1.5
Collector Current
Peak (1)
3
Continuous
0.75
Base Current
Peak (1)
1.5
Continuous
2.25
Emitter Current
Peak (1)
4.5
1.4
TO-126
TA=25°C
TO-92
1.1
TO-251
1.56
Power Dissipation
PD
TO-126
20
TC=25°C
TO-92
1.5
TO-251
25
Junction Temperature
TJ
+150
Storage Temperature
TSTG
-55 ~ +150
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
UNIT
V
V
V
A
A
A
W
W
W
W
W
W
°C
°C
3 of 5
QW-R223-023.c
13003ADG
„
Preliminary
NPN SILICON TRANSISTOR
ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified.)
PARAMETER
OFF CHARACTERISTICS (Note)
Collector-Emitter Sustaining Voltage
Collector Cutoff Current
SYMBOL
VCEO(SUS)
TC=25°C
TC=100°C
Emitter Cutoff Current
SECOND BREAKDOWN
Second Breakdown Collector Current with bass
forward biased
Clamped Inductive SOA with base reverse biased
ON CHARACTERISTICS (Note)
ICEO
IEBO
IC=10mA , IB=0
VCEO=Rated Value,
VBE(OFF)=1.5 V
VEB=9V, IC=0
MIN TYP MAX UNIT
400
V
1
5
1
Is/b
See Fig.5
RBSOA
See Fig.6
IC=0.5A, VCE=5V
IC=1A, VCE=5V
IC=0.5A, IB=0.1A
IC=1A, IB=0.25A
IC=1.5A, IB=0.5A
IC=1A, IB=0.25A, TC=100°C
IC=0.5A, IB=0.1A
IC=1A, IB=0.25A
IC=1A, IB=0.25A, TC=100°C
14
5
fT
COB
IC=100mA, VCE=10V, f=1MHz
VCB=10V, IE=0, f=0.1MHz
4
tD
tR
tS
tF
VCC=125V, IC=1A, B1=IB2=0.2A,
tP=25μs, Duty Cycle≤1%
hFE1
hFE2
DC Current Gain
Collector-Emitter Saturation Voltage
VCE(SAT)
Base-Emitter Saturation Voltage
VBE(SAT)
DYNAMIC CHARACTERISTICS
Current-Gain-Bandwidth Product
Output Capacitance
SWITCHING CHARACTERISTICS
Resistive Load (Table 1)
Delay Time
Rise Time
Storage Time
Fall Time
Inductive Load, Clamped (Table 1)
Storage Time
Crossover Time
Fall Time
Diode Forward Voltage
Note: Pulse Test: PW=300μs, Duty Cycle≤2%
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
tSTG
tC
tF
VF
IC=1A, VCLAMP=300V, IB1=0.2A,
VBE(OFF)=5VDC, TC=100°C
IF=0.5A
mA
mA
57
30
0.5
1
3
1
1
1.2
1.1
10
21
0.05
0.5
2
0.4
V
V
MHz
pF
0.1
1
4
0.7
μs
μs
μs
μs
1.7
4
0.29 0.75
0.15
1.5
μs
μs
μs
V
4 of 5
QW-R223-023.c
13003ADG
Preliminary
NPN SILICON TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R223-023.c