UNISONIC TECHNOLOGIES CO., LTD 13003CDH Preliminary NPN SILICON TRANSISTOR NPN SILICON POWER TRANSISTOR DESCRIPTION These devices are designed for high-voltage, high-speed power switching inductive circuits where fall time is critical. They are particularly suited for 115 and 220V applications in switch mode. FEATURES * Reverse biased SOA with inductive load @ TC=100°C * Inductive switching matrix 0.5 ~ 1.5 Amp, 25 and 100°C Typical tC = 290ns @ 1A, 100°C. * 900V blocking capability APPLICATIONS * Switching regulator’s, inverters * Motor controls * Solenoid/relay drivers * Deflection circuits EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number Lead Free Halogen Free 13003CDHL-TM3-T 13003CDHG-TM3-T 13003CDHL-T60-F-K 13003CDHG-T60-F-K 13003CDHL-T92-F-B 13003CDHG-T92-F-B 13003CDHL-T92-F-K 13003CDHG-T92-F-K Note: Pin Assignment: B: Base C: Collector E: Emitter Package TO-251 TO-126 TO-92 TO-92 Pin Assignment 1 2 3 B C E B C E B C E B C E Packing Tube Bulk Tape Box Bulk 13003CDHL-T60-F-B (1)Packing Type (1) T: Tube, B: Bluk, K: Bulk (2)Pin Assignment (2) refer to Pin Assignment (3)Package Type (3) TM3: TO-251, T60: TO-126, T92: TO-92 (4)Lead Free (4) L: Lead Free, G: Halogen Free www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 5 QW-R223-022.b 13003CDH Preliminary NPN SILICON TRANSISTOR MARKING PACKAGE MARKING TO-251 TO-126 TO-92 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R223-022.b 13003CDH Preliminary NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS PARAMETER Collector-Emitter Voltage Collector-Base Voltage Emitter Base Voltage SYMBOL VCEO(SUS) VCBO VEBO IC ICM IB IBM IE IEM RATINGS UNIT 400 V 900 V 9 V Continuous 1.5 Collector Current A Peak (1) 3 Continuous 0.75 Base Current A Peak (1) 1.5 Continuous 2.25 Emitter Current A Peak (1) 4.5 1.4 W TO-126 TA=25°C TO-92 1.1 W TO-251 1.56 W Power Dissipation PD TO-126 20 W TC=25°C TO-92 1.5 W TO-251 25 W Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R223-022.b 13003CDH Preliminary NPN SILICON TRANSISTOR ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified.) PARAMETER OFF CHARACTERISTICS (Note) Collector-Emitter Sustaining Voltage Collector Cutoff Current SYMBOL VCEO(SUS) TC=25°C TC=100°C Emitter Cutoff Current SECOND BREAKDOWN Second Breakdown Collector Current with bass forward biased Clamped Inductive SOA with base reverse biased ON CHARACTERISTICS (Note) ICEO IEBO IC=10mA , IB=0 VCEO=Rated Value, VBE(OFF)=1.5 V VEB=9V, IC=0 MIN TYP MAX UNIT 400 V 1 5 1 Is/b See Fig.5 RBSOA See Fig.6 IC=0.5A, VCE=5V IC=1A, VCE=5V IC=0.5A, IB=0.1A IC=1A, IB=0.25A IC=1.5A, IB=0.5A IC=1A, IB=0.25A, TC=100°C IC=0.5A, IB=0.1A IC=1A, IB=0.25A IC=1A, IB=0.25A, TC=100°C 14 5 fT COB IC=100mA, VCE=10V, f=1MHz VCB=10V, IE=0, f=0.1MHz 4 tD tR tS tF VCC=125V, IC=1A, B1=IB2=0.2A, tP=25μs, Duty Cycle≤1% hFE1 hFE2 DC Current Gain Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter Saturation Voltage VBE(SAT) DYNAMIC CHARACTERISTICS Current-Gain-Bandwidth Product Output Capacitance SWITCHING CHARACTERISTICS Resistive Load (Table 1) Delay Time Rise Time Storage Time Fall Time Inductive Load, Clamped (Table 1) Storage Time Crossover Time Fall Time Diode Forward Voltage Note: Pulse Test: PW=300μs, Duty Cycle≤2% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS tSTG tC tF VF IC=1A, VCLAMP=300V, IB1=0.2A, VBE(OFF)=5VDC, TC=100°C IF=0.5A mA mA 57 30 0.5 1 3 1 1 1.2 1.1 10 21 0.05 0.5 2 0.4 V V MHz pF 0.1 1 4 0.7 μs μs μs μs 1.7 4 0.29 0.75 0.15 1.5 μs μs μs V 4 of 5 QW-R223-022.b 13003CDH Preliminary NPN SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R223-022.b