Opti-Core® Fiber Optic Patch Cords and Pigtails SPECIFICATION SHEET technical information Fiber optic patch cords and pigtails provide interconnect and cross-connect of applications over installations in entrance facilities, telecommunications rooms, data centers and at the desk. Patch cords support network applications in main, horizontal and equipment distribution areas and are available in riser (OFNR), and low smoke zero halogen (LSZH) rated jacket materials to comply with local cabling ordinances. Pre-terminated fiber optic pigtails support fusion splice field termination applications. Fiber optic patch cords and pigtails are available in OM4, OM3, OM2, OM1, or OS1/ OS2 fiber types to meet the demands of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fibre Channel. application Provide interconnect and cross-connect of applications in entrance facilities, telecommunications rooms, data centers, at the desk and network applications to interconnect pre-terminated cassettes in main distribution, horizontal distribution, and equipment distribution areas. construction physical properties Fiber count: Cable outside diameter (OD): 1.6mm duplex 3mm simplex 900 micron Simplex (1-fiber) jacketed Duplex (2-fiber) jacketed zipcord Tight buffered Cable Riser (OFNR) jacket ratings: Low Smoke Zero Halogen (LSZH) per: IEC 60332-1-2, IEC 60332-3-24, IEC 60754-1, IEC 60754-2, IEC 61034-2 Fiber types: Singlemode: OS1/OS2 9/125µm Multimode: O M1 62.5/125µm OM2 50/125µm OM3 50/125µm OM4 50/125µm Connector types end ‘A’: Simplex or duplex LC, SC Jacket color: OS1/OS2: Yellow OM1: Orange OM2: Orange OM3: Aqua OM4: Aqua Buffered fiber (pigtail): Blue Connector types end ‘B’: Simplex or duplex LC, SC Connector cable retention: 50N @ 0°C 19.4N @ 90°C Connector durability: 500 cycles Bend radius, minimum: 1.6mm: 3mm: 16mm 29mm Note: For hybrid cords, the SC connector is always on End B. optical properties environmental properties Connector insertion loss: 0.25dB max. (Multimode - Standard IL) 0.15db max. (Multimode - Optimized IL) 0.10db max. (Multimode - Ultra IL) 0.35dB max. (LC singlemode) 0.50dB max. (SC singlemode) Storage and shipping temperature: 20dB min. (OM1 and OM2) 26dB min. (OM3 and OM4) 55dB min. (OS1/OS2) standards Connector return loss: Operating and installation temperature: Riser: -20°C to 70°C Plenum: 0°C to 60°C Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-3 (FOCIS-3), TIA-604-10 (FOCIS-10) Restriction of Hazardous Substances (RoHS) Compliance: w w w. p a n d u it.c o m -40°C to 70°C All patch cord components meet the requirements of Directive 2002/95/EC. Opti-Core® Fiber Optic Patch Cords and Pigtails part number Example: FZ2ERLNSNSNM005 = Fiber OM4, 2-fiber, 1.6mm cable, riser rated, LC duplex to SC duplex, standard IL, 5 meters Character 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Example F Z 2 E R L N S N S N M 0 0 5 1 – Fiber Product F = Fiber 2 – Fiber Type 6 = OM1 62.5/125µm 5 = OM2 50/125µm X = OM3 50/125µm Z = OM4 50/125µm 9 = OS1/OS2 9/125µm 3 – Fiber Count 1 = 1 fiber 2 = 2 fibers 4 – Cable Type B = 900µm buffer E = 1.6mm 3 = 3.0mm (For SC to SC cords) 5 – Jacket Type L = LSZH (Low Smoke Zero Halogen) N = (No Jacket) 900µm Buffered Fiber R = OFNR (Riser) 6 – Connector Type - End A 1 = LC 3 = SC L = LC duplex S = SC duplex 7 – Connector Variant N = No variant 8 – Connector Type - End B = LC 1 3 = SC L = LC duplex N = None; pigtail S = SC duplex 9 – Connector Variant N = No variant 10 – Performance/Construction = Standard IL (A-B) S O = Optimized (A-B) N = Ultra (A-B) 11 – Other N = No variant 12 – Unit of Length M = Meters 13, 14, 15 – Length 001-050 Note: For hybrid cords, the SC connector is always on End B. fiber optic patch cord detail Patch Cord Length Other options are available as follows; contact Panduit for part number: Fiber Type: OM4+(50/125µm Signature Core™) Cable Type: 3.0mm Jacket Type: OFNG (General Rated) Connector Type: ST, FC, SC/APC, E2000, MTRJ Female, FJ Jack Keyed, FJ Plug Keyed, LC Keyed, FJ Jack, FJ Plug, MTRJ Male Performance/Construction: Optimized IL – Straight Thru (A-B), Optimized IL – Flipped (A-A), Standard IL – Flipped (A-A) Other: Non-standard colored cable WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2016 Panduit Corp. ALL RIGHTS RESERVED. FBSP54--WW-ENG 4/2016