QuickNet Harness and Staggered Cable Assemblies: FBSP56--WW-ENG

QuickNet™ Harness and
Staggered Harness Cable Assemblies
S p e c i f i ca t i o n S H EET
technical information
QuickNet™ Harness (Hydra) and Staggered Harness Cable Assemblies allow for rapid
deployment of high-density, multi-port patch field connectivity for Storage Area Network
(SAN) applications. QuickNet™ Harness Cable Assemblies optimize SAN patch field
organization, ensuring efficient use of horizontal and vertical rack pathways. These
assemblies, built with modular MPO connectivity and traditional connectivity provide
compatibility, flexibility, and system performance in high-density LAN/SAN switch
Equipment Distribution Area (EDA) patch field applications.
QuickNet™ Harness and Staggered Harness Cable Assemblies are factory terminated and
tested to deliver verified optical performance and reliability for improved network integrity.
10Gig versions provide 10 Gb/s network performance up to 300 meters for OM3 and up to
550 meters for OM4 per IEEE 802.3ae 10 GbE standard while maintaining compatibility
with legacy systems.
application
Storage Area Network (SAN), Local Area Network (LAN) switch, Equipment Distribution Area (EDA) patch field applications
construction
physical properties
Cable type:
Indoor flat ribbon
Plenum OFNP
Low Smoke Zero Halogen (LSZH)
Cable outside
dimensions (OD):
2.5 x 5mm
Cable
jacket ratings:
Minimum bend radius:
20 x Cable OD (installation)
Fiber types:
Singlemode: OS1/OS2 9/125
Multimode: OM3 50/125µm
OM4 50/125µm
Cable tensile strength:
660N
Cable compressive load:
35N/cm
Connector types, MPO female
end ‘A’:
MPO male
Cable flex:
25 cycles
Cable twist:
10 cycles
Fiber count:
8 or 12
Connector cable retention:
50N
Jacket color:
OS1/OS2: Yellow
OM3:Aqua
OM4:Aqua
Connector
durability-singlemode:
MPO – 500 mating cycles
Breakout outside diameter:
13.0mm
Bend radius installation:
Installation:76.2mm
Long term: 38.1mm
Cable tensile strength:
Installation: 440N
Long term: 18N
Connector types, LC duplex
end ‘B’:
optical properties
environmental properties
Maximum cable
attenuation:
OS1/OS2 0.75dB/km at 1310/1550nm
OM3 3.5dB/km at 850nm, 1.5dB/km
at 1300nm
OM4 3.5dB/km at 850nm, 1.5dB/km
at 1300nm
Operating temperature:
Maximum
connector
insertion loss:
Per mated pair: 0.50dB typical, 0.75dB max.
Minimum
connector
insertion loss:
Singlemode: 55dB minimum
Multimode: OM3 26dB minimum
OM4 26dB minimum
w w w. p a n d u it.c o m
Storage and shipping
temperature:
Installation temperature:
0°C to 50°C
-40°C to 65°C
0°C to 50°C
standards
Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3,
TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1
RoHS Compliant
QuickNet™ Harness and Staggered Harness Cable Assemblies
part number
Example: FZTHP6NLSSNM001 = Fiber OM4, 12-fiber, flat ribbon, plenum rated, MPO male to LC harness with 61cm equal breakout, standard IL,
no pulling eye, 1 meter
Character
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Example
F
Z
T
H
P
6
N
L
S
S
N
M
0
0
1
1 – Fiber Product
F = Fiber
2 – Fiber Type
9 = OS1/OS2 9/125µm
X = OM3 50/125 µm
Z = OM4 50/125 µm
3 – Fiber Count
8 = 8-fiber
T = 12-fiber
4 – Cable Type
H = Flat ribbon
5 – Jacket Type
L = Low Smoke Zero Halogen (LSZH)
P = Optical Fiber Nonconductive Plenum (OFNP)
6 – Connector Type End “A”
5 = MPO female
6 = MPO male
7 – Connector Variant
N = No variant
8 – Connector Type End “B”
L = LC duplex
9 – Connector Variant
D = 1m equal breakout
S = 61cm equal breakout
N = No variant
F = Staggered pair 1 longest breakout
G = Staggered pair 1
shortest breakout
H = Staggered pairs 1 and 2 longest breakouts
J = Staggered pairs 1 and 2 shortest breakouts
10 – Construction/Performance
S = Standard IL – straight thru (MPO - Discrete)
11 – Other
N = No variant
12 – Unit of Length
F = Feet
M = Meters
13, 14, 15 – Length
1 – 30m
3 – 100 feet
Other options are available as follows:
Fiber Type: OM1 62.5/125, OM2 50/125, OM4+ 50/125 Sig Core
Jacket Type: Riser OFNR
Connector Type: LC, ST, SC, FC, SC/APC, mSFP, LC duplex, E2000, MTRJ Female, FJ Jack, MTRJ Male, FJ plug, SC duplex
Connector Variant: 46cm (18") equal breakout, 76cm (30") equal breakout, 91cm (36") equal breakout
Performance/Construction: Optimized performance/standard polarity, Optimized performance/flipped pair, standard performance/flipped pair
harness assembly detail
Fiber 12
Fiber 1
(on same side
as white dot)
Multi-Fiber Cable
MPO Connector (Male)
Key Down
Fiber 1
Breakout Length: 61cm Std.
Cable Assembly Length
w w w. pa n d u it.c o m
QuickNet™ Harness and Staggered Harness Cable Assemblies
staggered harness assembly detail
Dual Pair Stagger Pairs 1 and 2 Shortest
Fiber 12
MPO Connector
Key down
Fiber 1
LC Connector Pairs 1 and 2
190mm
LC Connector Pairs 3 and 4
205mm
Fiber 1
(on same side
as white dot)
Dual Pair Stagger Pairs 1 and 2 Longest
LC Connector Pairs 6
220mm
LC Connector Pairs 1 and 2
220mm
LC Connector Pairs 3 and 4
205mm
LC Connector Pairs 5 and 6
190mm
Fiber 12
MPO Connector
Key down
Fiber 1
w w w. p a n d u it.c o m
QuickNet™ Harness and Staggered Harness Cable Assemblies
staggered harness assembly detail
Fiber 12
Stagger Pair 1 Shortest
Connector A = MPO
(Male) Standard
Key down
12 Fiber Jacketed
Ribbon Cable
Fiber 1
LC Connector Pair 1
145mm
LC Connector Pair 2
160mm
LC Connector Pair 3
175mm
LC Connector Pair 4
190mm
LC Connector Pair 5
205mm
LC Connector Pair 6
220mm
Fiber 1
(on same side
as white dot)
Stagger Pair 1 Longest
LC Connector Pair 6
220mm
LC Connector Pair 5
205mm
LC Connector Pair 4
190mm
LC Connector Pair 3
175mm
LC Connector Pair 2
160mm
LC Connector Pair 1
145mm
Fiber 12
Connector A = MPO
(Male) Standard
Key down
12 Fiber Jacketed
Ribbon Cable
Fiber 1
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300 and reference FBSP56
©2012 Panduit Corp.
All rights reserved.
FBSP56--WW-ENG
11/2012