UNISONIC TECHNOLOGIES CO., LTD U74AHCT4066 CMOS IC QUADRUPLE BILATERAL ANALOG SWITCH DESCRIPTION The U74AHCT4066 is a quadruple bilateral analog switch which has 4 channels. FEATURES * Inputs Are TTL-Voltage Compatible * Max tPD of 6ns at 5 V * Low Power Dissipation: ICC=2μA(Max) * Low Input Current: IIN=1μA(Max) ORDERING INFORMATION Ordering Number U74AHCT4066G-S14-R Package SOP-14 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 6 QW-R502-420.C U74AHCT4066 CMOS IC PIN CONFIGURATION 1A 1 14 VCC 1B 2 13 1C 2B 3 12 4C 2A 4 11 4A 2C 5 10 4B 3C 6 9 3B GND 7 8 3A FUNCTION TABLE INPUTS CONTROL (C) SWITCH H ON L OFF Note: H: HIGH voltage level; L: LOW voltage level. LOGIC DIAGRAM One Of Four Switches UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-420.C U74AHCT4066 CMOS IC ABSOLUTE MAXIMUM RATING (TA=25°C,unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage Range VCC -0.5 ~ +7 V Input Voltage Range VC -0.5 ~ +7 V Switch I/O Voltage Range VIO -0.5 ~ VCC +0.5 V VCC or GND Current ICC ±50 mA I/O Diode Current IIOK ±50 mA Control Input Clamp Current IIK -20 mA On-state Switch Current IT ±25 mA Operating Temperature TOPR -40 ~ + 85 °С Storage Temperature TSTG -65 ~ + 150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient RATINGS 86 UNIT °С/W RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage High-Level Input Voltage Low-Level Input Voltage Control Input Voltage Input/Output Voltage Input Transition Rise or Fall Rate SYMBOL θJA SYMBOL TEST CONDITIONS VCC VIH VCC=4.5V to 5.5V VIL VCC=4.5V to 5.5V VC VIO tR / tF VCC=4.5V to 5.5V MIN 4.5 2 TYP 0.8 5.5 VCC 20 UNIT V V V V V ns/V TYP 21 31 MAX 75 100 UNIT Ω Ω 2 15 Ω ±0.1 ±0.1 μA μA ±0.1 μA 2 μA pF pF pF 0 0 0 MAX 5.5 ELECTRICAL CHARACTERISTICS (TA=25°C,unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS On-state Switch Resistance RON Peak On-state Resistance RON(P) VCC=4.5V, IT=-1mA, VIN=GND or VCC, VCC= VIH Difference In On-state Resistance ∆RON Between Switches Control Input Current II(CTL) VCC=5.5V, VC= 5.5V or GND On-state Switch Leakage Current IS(ON) VCC=5.5V, VI= VCC or GND, VC= VIH VCC=5.5V, VI= VCC and VO=GND, or Off-state Switch Leakage Current IS(OFF) VI=GND and VO= VCC, VC= VIL Quiescent Supply Current IQ VCC=5.5V, VC=VCC or GND Control Input Capacitance CIC Feed-through Capacitance CF Switch Input/Output Capacitance CIO UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.5 0.5 5.5 3 of 6 QW-R502-420.C U74AHCT4066 CMOS IC SWITCHING CHARACTERISTICS (TA=25°C, SEE TEST CIRCUIT AND WAVEFORMS) PARAMETER Propagation Delay Time, From (A) to (B) Or (B) to (A) SYMBOL tPLH/tPHL Switch Turn-on Time, From (C) to (A) or (B) tPZL/tPZH Switch Turn-off Time, From (C) to (A) or (B) tPLZ/tPHZ TEST CONDITIONS CL =15pF CL =50pF CL =15pF VCC=5V±0.5V CL =50pF CL =15pF CL =50pF MIN TYP MAX UNIT 0.3 4 ns 0.6 6 ns 1.6 7 ns 2.1 12 ns 3.2 7 ns 5.1 12 ns ANALOG SWITCHING CHARACTERISTICS (TA=25°C,unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN CL=50pF, RL=600Ω, fin=1MHZ, Frequency Response(Switch On), From A to B Or B to A 20log10 (VO/VI)=-3dB Crosstalk(Between Any Switches), From A to B Or B to A VCC=4.5V Crosstalk(Control Input To Signal CL=50pF, RL=600Ω, fin=1MHZ Output), From C to A or B Feed-Through Attenuation (Switch Off), From A to B Or B to A VCC=4.5V, Sine-Wave Distortion CL=50pF, RL=10KΩ, fin=1KHZ VI=4 VP-P TYP MAX UNIT 50 MHZ -45 dB 50 mV -40 dB 0.1 % OPERATING CHARACTERISTICS (TA=25°C,unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS CPD CL =50pF,f=1MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 4.5 pF 4 of 6 QW-R502-420.C U74AHCT4066 CMOS IC TEST CIRCUIT AND WAVEFORMS Test circuit for measuring ON-state resistance RON Test circuit for measuring OFF-state current Test circuit for measuring ON-state current UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-420.C U74AHCT4066 CMOS IC TEST CIRCUIT AND WAVEFORMS(Cont.) Test circuit for measuring propagation delay time, switching time Waveforms showing the Input(VI) to Output(VO) propagation delays Waveforms showing the turn-on and turn-off times Note: CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤1MHz, Zo = 50Ω, tr ≤3ns, tf ≤3ns. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-420.C