10-PZ12NMA080ME02-M347F38Y target datasheet flow MNPC 0 1200 V / 80 mΩ Features flow 0 12mm housing ● Ultrafast switching ● High efficient with SiC MOSFETs ● AlN substrat for M34x Schematic Target applications ● Power Supply ● Solar ● Special Application Types ● 10-PZ12NMA080ME02-M347F38Y Maximum Ratings Tj = 25 °C, unless otherwise specified Parameter Symbol Condition Value Unit 1200 V 24 A 80 A 1000 mJ 87 W Half-Bridge Switch Drain-source voltage VDSS Drain current ID Tj = Tjmax Peak drain current IDM tp limited by Tjmax Avalanche energy, single pulse EAS Total power dissipation Ptot Gate-source voltage VGSS -10/+25 V Maximum Junction Temperature Tjmax 175 °C Copyright Vincotech Ts = 80 °C ID = 20 A VDD = 50 V Tj = Tjmax Ts = 80 °C 1 02 Jun. 2016 / Revision 1 10-PZ12NMA080ME02-M347F38Y target datasheet Maximum Ratings Tj = 25 °C, unless otherwise specified Parameter Symbol Condition Value Unit 650 V 38 A 175 A 119 W Neutral Point Switch Drain-source voltage VDSS Drain current ID Tj = Tjmax TS = 80 °C Peak drain current IDM tp limited by Tjmax Total power dissipation Ptot Tj = Tjmax Gate-source voltage VGSS -4/+22 V Maximum Junction Temperature Tjmax 175 °C VMAX 500 V Top -55…+125 °C Storage temperature Tstg -40…+125 °C Operation temperature under switching condition Tjop -40…(Tjmax - 25) °C 4000 V min. 12,7 mm 9,17 mm TS = 80 °C Capacitor (DC) Maximum DC voltage Operation Temperature Module Properties Thermal Properties Isolation Properties Isolation voltage Visol DC Test Voltage Creepage distance Clearance Comparative Tracking Index Copyright Vincotech CTI tp = 2 s > 200 2 02 Jun. 2016 / Revision 1 10-PZ12NMA080ME02-M347F38Y target datasheet Characteristic Values Parameter Symbol Conditions VCE [V] VGE [V] VDS [V] VGS [V] VF [V] Value IC [A] ID [A] IF [A] Tj [°C] Min Unit Typ Max 76 119 130 98 Half-Bridge Switch MOSFET Static Drain-source on-state resistance rDS(on) Gate-source threshold voltage VGS(th) 20 VGS = VDS 10 Gate to Source Leakage Current IGSS -10/+25 0 Zero Gate Voltage Drain Current IDSS 0 20 25 125 150 0,005 25 125 1200 2,4 3 250 25 100 125 rg 4,6 Gate charge Qg 62 Gate to source charge QGS Gate to drain charge QGD 23 Short-circuit input capacitance Ciss 950 Short-circuit output capacitance Coss Reverse transfer capacitance Crss f=1MHz 0 800 20 1000 V 25 125 Internal gate resistance -5/20 mΩ 25 25 15 80 nA µA Ω nC pF 7,6 Reverse Diode Static Forward voltage VSD 10 VGS = -5 V 25 3,30 V 1,09 K/W Thermal Thermal resistance junction to sink Copyright Vincotech Rth(j-s) Thermal foil thickness=76um Kunze foil KU-ALF5 3 02 Jun. 2016 / Revision 1 10-PZ12NMA080ME02-M347F38Y target datasheet Characteristic Values Parameter Symbol Conditions VCE [V] VGE [V] VDS [V] VGS [V] VF [V] Value IC [A] ID [A] IF [A] Tj [°C] Min Unit Typ Max 34 38 42 37,5 Neutral Point Switch Static Drain-source on-state resistance rDS(on) Gate-source threshold voltage VGS(th) 18 VGS = VDS 27 25 125 150 0,0133 25 2,7 mΩ 5,6 V Gate to Source Leakage Current IGSS -4/+22 0 25 ±100 nA Zero Gate Voltage Drain Current IDSS 0 650 25 10 µA Internal gate resistance rg 7 Gate charge Qg 104 Gate to source charge QGS Gate to drain charge QGD 42 Short-circuit input capacitance Ciss 1526 Short-circuit output capacitance Coss Reverse transfer capacitance Crss 18 f = 1MHz 0 300 27 500 25 25 25 89 Ω nC pF 42 Reverse diode Static Forward voltage Vsd VGS = 0 V Rth(j-s) Thermal foil thickness = 76 µm Kunze foil KU-ALF5 27 25 3,20 V 0,80 K/W Thermal Thermal resistance junction to sink Copyright Vincotech 4 02 Jun. 2016 / Revision 1 10-PZ12NMA080ME02-M347F38Y target datasheet Characteristic Values Parameter Symbol Conditions VCE [V] VGE [V] VDS [V] VGS [V] VF [V] Value IC [A] ID [A] IF [A] Tj [°C] Min Typ Unit Max Capacitor (DC) Capacitance C 270 Tolerance -10 nF +10 % Thermistor Rated resistance R Deviation of R100 ΔR/R Power dissipation 25 R100 = 1484 Ω 100 P Power dissipation constant 22 -5 kΩ 5 % 25 5 mW 25 1,5 mW/K B-value B(25/50) Tol. ±1 % 25 3962 K B-value B(25/100) Tol. ±1 % 25 4000 K Vincotech NTC Reference Copyright Vincotech I 5 02 Jun. 2016 / Revision 1 10-PZ12NMA080ME02-M347F38Y target datasheet Ordering Code & Marking Version without thermal paste 12mm housing with Press-fit pins NN-NNNNNNNNNNNNNN TTTTTTVV WWYY UL VIN LLLLL SSSS Ordering Code 10-PZ12NMA080ME02-M347F38Y Text Datamatrix Name Date code UL & VIN Lot Serial NN-NNNNNNNNNNNNNN-TTTTTTVV WWYY UL VIN LLLLL SSSS Type&Ver Lot number Serial Date code TTTTTTTVV LLLLL SSSS WWYY Outline Pin table [mm] Pin X Y Function 1 0 22,2 S11 2 3,1 22,2 G11 3 12,8 22,2 DC+ 4 15,3 22,2 DC+ 5 22,7 22,2 GND 6 30,1 22,2 S13 7 33,2 22,2 G13 8 33,2 16,4 Ph 9 33,2 13,9 Ph 10 33,2 8,3 Ph 11 33,2 5,8 Ph 12 33,2 0 G14 13 30,1 0 S14 14 22,7 0 GND 15 15,3 0 DC- 16 12,8 0 Dc- 17 3,1 0 G12 18 0 0 S12 19 0 9,55 20 0 12,65 Therm1 Therm2 Copyright Vincotech 6 02 Jun. 2016 / Revision 1 10-PZ12NMA080ME02-M347F38Y target datasheet Pinout Identification ID Component Voltage Current Function T11,T12 MOSFET 1200 V 80 mΩ Half-Bridge Switch 30 mΩ Neutral Point Switch T13,T14 MOSFET 650 V C10,C20 Capacitor 500 V Rt Thermistor Copyright Vincotech Comment Capacitor (DC) Thermistor 7 02 Jun. 2016 / Revision 1 10-PZ12NMA080ME02-M347F38Y target datasheet Packaging instruction Standard packaging quantity (SPQ) 135 >SPQ Standard <SPQ Sample Handling instruction Handling instructions for flow 0 packages see vincotech.com website. Package data Package data for flow 0 packages see vincotech.com website. UL recognition and file number This device is certified according to UL 1557 standard, UL file number E192116. For more information see vincotech.com website. Document No.: Date: 10-PZ12NMA080ME02-M347F38Y-T1-14 02 Jun. 2016 Modification: Pages DISCLAIMER The information, specifications, procedures, methods and recommendations herein (together “information”) are presented by Vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. Vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. No representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. It is reader’s sole responsibility to test and determine the suitability of the information and the product for reader’s intended use. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright Vincotech 8 02 Jun. 2016 / Revision 1