UNISONIC TECHNOLOGIES CO., LTD UCD4071B CMOS IC QUAD 2-INPUT OR BUFFERED B SERIES GATE DESCRIPTION The UTC UCD4071B contains four independent 2-input OR gates and they perform the function Y=A+B in positive logic. SOP-14 FEATURES * 5V-10V-15V Parametric Ratings * Quad 2-Input OR Gate * Symmetrical Output Characteristics * Maximum Input Current of 1uA at 15V Over Full Package Temperature * Low Power TTL: Fan Out of 2 Driving 74L or 1 Driving 74LS Compatibility ORDERING INFORMATION Ordering Number Lead Free UCD4071BL-S14-T UCD4071BL-S14-R Halogen Free UCD4071BG-S14-T UCD4071BG-S14-R Package Packing SOP-14 SOP-14 Tube Tape Reel MARKING 14 13 12 11 10 9 8 6 7 UTC UCD4071B 1 2 3 4 5 Date Code L: Lead Free G: Halogen Free Lot Code www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-520.D UCD4071B PIN CONFIGURATION 1A 1 14 VDD 1B 2 13 4B 1Y 3 12 4A 2Y 4 11 4Y 10 3Y 2A 5 2B 6 9 3B VSS 7 8 3A FUNCTION TABLE (each gate) INPUT(A) H H L L CMOS IC INPUT(B) H L H L OUTPUT(Y) H H H L LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-520.D UCD4071B CMOS IC ABSOLUTE MAXIMUM RATING(TA=25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VDD -0.5 ~ 18 V Input Voltage V(nA,nB) -0.5 ~ VDD +0.5 V Output Voltage V(nY) -0.5 ~ VDD +0.5 V Storage Temperature TSTG -65 ~ + 150 °С Lead Temperature(Soldering,10s) TL 260 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Operating Temprature SYMBOL VDD TOP RATINGS 3 ~ 15 -40 ~ +125 UNIT V °С ELECTRICAL CHARACTERISTICS(TA=25°С, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS VDD= 5V, VO=0.5V High-Level Input Voltage VIH VDD= 10V, VO=1.0V VDD= 15V, VO=1.5V VDD= 5V, VO=4.5V Low-Level Input Voltage VIL VDD= 10V, VO=9.0V VDD= 15V, VO=13.5V VDD= 5V, IOH=1µA High-Level Output Voltage VOH VDD= 10V, IOH=1µA VDD= 15V, IOH=1µA VDD= 5V, IOL=1µA Low-Level Output Voltage VOL VDD= 10V, IOL=1µA VDD= 15V, IOL=1µA VDD= 5V, VO=4.6V High-Level Output Current IOH VDD= 10V, VO=9.5V (NOTE) VDD= 15V, VO=13.5V VDD= 5V, VO=0.4V Low-Level Output Current IOL VDD= 10V, VO=0.5V (NOTE) VDD= 15V, VO=1.5V Input Leakage Current II(LEAK) VDD= 15V ,VIN = VDD or GND VDD= 5V, VIN = VDD or VSS, IOUT = 0 Quiescent Supply Current IQ VDD= 10V, VIN = VDD or VSS, IOUT = 0 VDD= 15V, VIN = VDD or VSS, IOUT = 0 Note: IOL and IOH are tested one output at a time UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 3.5 7.0 11.0 4.95 9.95 14.95 -0.51 -1.3 -3.4 0.51 1.3 3.4 TYP 3 6 9 2 4 6 5 10 15 0 0 0 -0.88 -2.25 -8.8 0.88 2.25 8.8 0.004 0.005 0.006 MAX UNIT V 1.5 3.0 4.0 V V 0.05 0.05 0.05 V mA 0.1 0.25 0.5 1.0 µA µA 3 of 5 QW-R502-520.D UCD4071B CMOS IC SWITCHING CHARACTERISTICS(TA=25°С, Input: tR=tF=20ns, unless otherwise specified) PARAMETER SYMBOL tPLH Propagation delay from Input(A or B) to Output(Y) tPHL Transition Time tTLH tTHL TEST CONDITIONS VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ MIN TYP 90 40 30 100 40 30 90 50 40 MAX 250 100 70 250 100 70 200 100 80 UNIT TYP 5 18 MAX 7.5 UNIT ns ns OPERATING CHARACTERISTICS(TA=25°С, unless otherwise specified) PARAMETER Average Input Capacitance Power Dissipation Capacitance SYMBOL CIN Cpd TEST CONDITIONS Any Input Any Gate UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN pF 4 of 5 QW-R502-520.D UCD4071B CMOS IC TEST CIRCUIT AND WAVEFORMS Output CL 50pF RL 200kΩ VCC V 50% 50% 0V Vo VOH 50% 50% VOL Note: CL includes probe and jig capacitance. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-520.D