UNISONIC TECHNOLOGIES CO., LTD CD4069 CMOS IC INVERTER CIRCUITS DESCRIPTION SOP-14 The UTC CD4069 consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve wide power supply operating range, low power consumption, high noise immunity, and symmetric controlled rise and fall times. All inputs are protected from damage due to static discharge by diode clamps to VDD and VSS. DIP-14 FEATURES * Wide supply voltage range: 3.0V ~ 15V. * High noise immunity: 0.45 VDD typ. * Low Power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS. ORDERING INFORMATION Ordering Number Lead Free CD4069L-D14-T CD4069L-S14-R CD4069L-S14-T Halogen Free CD4069G-D14-T CD4069G-S14-R CD4069G-S14-T www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., LTD Package Packing DIP-14 SOP-14 SOP-14 Tube Tape Reel Tube 1 of 7 QW-R502-020.C CD4069 CMOS IC PIN CONFIGURATION VDD 14 13 12 11 10 9 1 2 3 4 5 6 8 7 VSS BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 7 QW-R502-020.C CD4069 CMOS IC ABSOLUTE MAXIMUM RATINGS PARAMETER DC Supply Voltage Input Voltage Storage Temperature Range RATINGS UNIT -0.5 ~ +18 V -0.5 ~ VDD +0.5 V -65 ~ +150 ℃ DIP-14 700 Power Dissipation PD mW SOP-14 500 ℃ Junction Temperature TJ 125 ℃ Operating Temperature TOPR -20 ~ +85 ℃ Storage Temperature TSTG -40 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VDD VIN TS RECOMMENDED OPERATING CONDITIONS (VSS=0V ) PARAMETER DC Supply Voltage Input Voltage Operating Temperature SYMBOL VDD VIN TA RATINGS 3 ~ 15 0 ~ VDD -40 ~ 85 UNIT V V ℃ DC ELECTRICAL CHARACTERISTICS (VSS=0V, TA=25℃, unless otherwise specified.) PARAMETER SYMBOL Quiescent Device Current IDD Low Level Output Voltage VOL High Level Output Voltage VOH Low Level Input Voltage VIL High Level Input Voltage VIH Low Level Output Current (Note 2) IOL High Level Output Current (Note 2) IOH Input Current IIN CONDITIONS VDD=5V, VIN=VDD or VSS VDD=10V, VIN=VDD or VSS VDD=15V, VIN=VDD or VSS VDD=5V |IO|<1μA VDD=10V VDD=15V VDD=5V |IO|<1μA VDD=10V VDD=15V VDD=5V, VO=4.5V |IO|<1μA VDD=10V, VO=9V VDD=15V, VO=13.5V VDD=5V, VO=0.5V |IO|<1μA VDD=10V, VO=1V VDD=15V, VO=1.5V VDD=5V, Vo=0.4V VDD=10V, Vo=0.5V VDD=15V, Vo=1.5V VDD=5V, Vo=4.6V VDD=10V, Vo=9.5V VDD=15V, Vo=13.5V VDD=15V, VIN=0V VDD=15V, VIN=15V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 0 0 0 MAX 1.0 2.0 4.0 0.05 0.05 0.05 4.95 9.95 14.95 μA V V 1.0 2.0 3.0 4.0 8.0 12.0 0.44 1.1 3.0 -0.44 -1.1 -3.0 UNIT V V 0.88 2.25 8.8 -0.88 -2.25 -8.8 -10-5 10-5 mA mA -0.30 0.30 μA 3 of 7 QW-R502-020.C CD4069 CMOS IC AC ELECTRICAL CHARACTERISTICS (Note 1) (TA=25℃, CL=50pF, RL=200kΩ, tR and tF ≤ 20 ns, unless otherwise specified) PARAMETER SYMBOL CONDITIONS MIN VDD=5V Propagation Delay Time from tPHL or tPLH VDD=10V Input to Output VDD=15V VDD=5V Transition Time tTHL or tTLH VDD=10V VDD=15V Average Input Capacitance CIN Any Gate Power Dissipation Capacitance CPD Any Gate (Note 3) Notes: 1. AC Parameters are guaranteed by DC correlated testing. 2. IOH and IOL are tested one output at a time. 3. CPD determines the no load AC power consumption of any CMOS device. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 50 30 25 80 50 40 6 12 MAX 90 60 50 150 100 80 15 UNIT ns ns pF pF 4 of 7 QW-R502-020.C CD4069 CMOS IC AC TEST CIRCUITS AND SWITCHING TIME WAVEFORMS VDD INPUT VSS 10% tPHL VDD OUTPUT VSS tR 90% 90% 50% 50% tF 10% tPLH 90% 50% 50% 10% 10% t THL 90% tTLH tR=tF=20ns UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 7 QW-R502-020.C CD4069 CMOS IC TYPICAL PERFORMANCE CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R502-020.C CD4069 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R502-020.C