UNISONIC TECHNOLOGIES CO., LTD 1N4004G DIODE GLASS PASSIVATED SILICON RECTIFIER DESCRIPTION The UTC 1N4004G is a glass passivated silicon rectifier, it uses UTC’s advanced technology to provide customers with high forward surge current and low reverse leakage, etc. DO-41 FEATURES + * Low reverse leakage * High forward surge current capability SMA (JEDEC DO-214AC) SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free 1N4004GL-SMA-R 1N4004GP-SMA-R 1N4004GL-Z41-B 1N4004GP-Z41-B 1N4004GL-Z41-R 1N4004GP-Z41-R Note: Pin Assignment: A: Anode K: Cathode Package SMA DO-41 DO-41 Pin Assignment 1 2 K A K A K A Packing Tape Reel Tape Box Tape Reel MARKING SMA Cathode Band for uni-directional Only UTC 4004G DO-41 Cathode Band for uni-directional Only Date Code L: Lead Free P: Halogen Free www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 4004G L: Lead Free P: Halogen Free Date Code 1 of 4 QW-R601-253.C 1N4004G DIODE ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Working Peak Reverse Voltage VRWM 400 V Repetitive Peak Reverse Voltage VRRM 400 V DC Blocking Voltage VR 400 V Average Rectified Output Current (TA=75°C) IO 1.0 A Peak Forward Surge Current 8.3ms Single Half IFSM 30 A Sine-Wave Superimposed on Rated Load Junction Temperature TJ -55 ~ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient (Note 2) SYMBOL SMA DO-41 θJA RATINGS 95 50 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Instantaneous Forward Voltage VFM IF=1.0A 1.1 V DC Reverse Current at Rated DC Blocking TA=25°C 5.0 μA IRM Voltage 50 μA TA=100°C Junction Capacitance (Note 1) CJ 15 pF Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R601-253.C 1N4004G DIODE TYPICAL CHARACTERISTICS Maximum Non-repetitive Peak Forward Surge Current Forward Current Derating Curve 30 Peak Forward Surge Current, IFSM (A) Average Forward Rectified Current, IO (A) 1.0 0.8 0.6 0.4 0 0 Single Phase Half Wave 60Hz Resistive or inductive Load 25 50 75 100 125 150 25 20 15 10 5.0 1 175 8.3ms Single Half Sine-Wave (JEDEC Method) 10 Number of Cycles at 60Hz Ambient Temperature, TA (°C) Typical Instantaneous Forward Characteristics Typical Reverse Characteristics 1,000 10 1 0.1 0.01 0.6 TJ=25°C Pulse Width=300s 1% Duty Cycle 0.8 1.0 1.2 Nstantaneous Reverse Current (μA) Instantaneous Forward Current (A) 20 100 0.1 TJ=25°C 0.01 Transient Thermal Impedance (°C/W ) Junction Capacitance, CJ (pF) 20 40 60 80 100 Typical Transient Thermal Impedance TJ=25°C 10 100 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 0 Percent of Peak Reverse Voltage (%) Typical Junction Capacitance 1.0 10 Reverse voltage (V) TJ=100°C 1 1.4 1.5 200 1 0.1 TJ=150°C 10 Instantaneous Forward Voltage, VFM (V) 100 100 100 10 1 0.1 0.01 0.1 1 10 t, Pulse Duration (sec.) 100 3 of 4 QW-R601-253.C 1N4004G DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R601-253.C